Nodis Sunlight User manual
User manual
www.nodis.it
10 9 8 7
sunlight
Version no.: V01 Edition date: 30/08/2016
PLEASE READ CAREFULLY THIS USER MANUAL AND STORE IT FOR FUTURE
USES.
Product’s specication:
- Light function: warm light, candle light, RGB light
- Multifunction: Bluetooth Speaker / SD card slot to play music / AUX IN to connect to
smart phones and Mp3 players / Alarm Clock
- 3 levels of brightness
- LED Power consumption: 2W
- Luminous ux : 16 Lm
- Color temperature: 2800-3200K
- Quantity of LEDS: Warm light: 8pcs RGB light: 8pcs
- Working temperature:-5°C to 45°C
- LED working time: 30.000hrs
- CRI>80
- Brightness: >12lux at 30cm
- LED light working time: 4-7h (depends on light brightness)
- Beam Angle: 100°
- Instant lighting
- Not suitable for accent lighting
- Bluetooth: 2.1+EDR
- Speaker output power: 3W
- Frequency: 50HZ - 20KHZ
- Signal-to noise: 85db
- Max Bluetooth distance: 10m
- Music running time: 6h
- Input: DC 5V 1A
- Built-in 3.7V 1500mAh Lithium battery
- Product size:ø95x125 mm
- Accessories Included: 1pc USB cable and 1pc Aux in cable
Caution:
• Please do not disassemble the product as it may cause safety problems such as
electric danger.
• Please use transformer and power outlet approved by the manufacturer to keep a
proper operation of your product.
• To avoid damage to the product’s joint, please do not make frequent work on the
joint adjustment.
• Please do not place the product on any shaky desk to avoid damage due to the
drop.
• Please do not place it under the high humidity or high temperature environment.
• To avoid damage to your eyes, please do not look at the LED light directly.
• If there is any problem in use, you can contact the customer service staff for help:
• Damaged power line or damaged power plug;
• When the lamp holder suffers from damp or rain;
• Damaged lamp holder’s shell or damaged joint;
• Lamp holder with emitted smoke or sparks or other unsafe factors;
• Unusual LED light is blinking or damage to the LED light.
Long press the M key allow you to switch the LCD light mode, which is including warm
light, candle light and breathing light.
3. Play Music
Press the Play/Pause key to play or pause music, short press to the last
music, short press to the next music, long press to a volume down, long
press to a volume up.
4. Light Mode
Warm light
Warm light is the default start. Continue to press the loudspeaker grille on the top of
the product to allow you to increase the brightness gradually. With each press the
brightness will be increased by one level.
The third press allows you to make the brightest light.
The fourth press will once allow you to make the brightness back to the minimum by
30%. Then with a long press will allow you to close the light.
RGB Light and candle light
Long press M key to turn on the machine into the candle light
mode. With a short press on the loudspeaker grille will change
the light color. With a long press on the loudspeaker grille will
close the RGB light.
5. Clock and alarm
Alarm clock setting
With the rst press on the key or key, you will adjust the alarm through “+” or “-“
key, short press the key again to adjust minute through “+/-“ key.
“+” key
With the rst short press on the key or key to adjust hour, then take a short
press on the “+” key, the number of the hour will go up; take the second short press
on the key or key to adjust minute, then take a short press on the “-“ key, the
number of the minute of the minute will go down.
“-“ key
With the rst short press on the key or key to adjust hour, then take a short
press on the “-“ key, the number of the hour will go down, then take the second short
press on the “-” key, the number of the minute will go up.
6. USB Interface
You can charge the machine by the USB interface.
Red indicator light keeps on when charging, when fully charged, it will turn to green.
The light will be off if USB is not plugged in.
7. AUX Audio Input
Please insert audio wire plug for receiving audio frequency (it will
change into AUX mode automatically). With the audio wire connection,
the Bluetooth function will be closed whereas when pulling out the
wire will switch back to the Bluetooth mode again.
Product functions and features
• This product is equipped with advanced luminous technology without dizzy light or
frequently ash The light is soft enough to protect your eyes
• It has a super long service life.
• It has a touch surface on which you can adjust the brightness freely by an easy
operation
• Fashion style with optional mode: Bluetooth / Audio Input / TF card
• 1800mAh Lithium Polymer Battery
• It is an anti-skid design
• It can be regarded as a hanging night-light for a household or outdoor use
• 1/3 Power Charge: lower power than traditional ones
• No ultraviolet radiation: do not hurt your skin
• Rainbow light effect: optionally choose one of the 7 colors
• Vision light: anti-dazzle lter
• Vivid color: natural light
• Controlled color temperature
• Environment-protective material: without mercury or lead
Technical specication
Material ABS+PP Input Power DC 5V 1A Bluetooth
standard
Bluetooth 2.1 +
EDR
Output power 3W Battery
capacity
1800mAh Product size 95x95x125MM
Key-press mode Touch / Key Press
Operation Instruction
1. On / Off Key
Long press the power key to turn on and off the machine with a voice prompt.
After turning on the machine, the automatic Bluetooth will be ready to pair and begin
to search for the other equipment to pair. Once any Bluetooth equipment has been
successfully matched, their will be another voice prompt. You can use any Bluetooth
equipment to play your favorite music by searching the link S2. It will connect
automatically whenever the machine starts.
Remark: the machine will automatically search the Bluetooth equipment for match in
the rst 3 seconds after the Bluetooth mode’s open. After 3 seconds, you will need
to choose the Bluetooth equipment with manually connecting. Short press the power
key to turn on and off the Bluetooth. The Bluetooth can work over a range of about
10 meters.
2. M key
Short press the M Key to allow you to switch mode among Bluetooth / SD / AUX.
(There will be mode when operation, whereas skipping-mode without operation, for
example you can successfully switch to the SD card mode only when you have put
the TF card into the TF card slot). Bluetooth is prior when SD card and AUX are
inserted simultaneously.
8. TF Card Mode
With a smart decoding function, the product can play all of the storing music in the TF
card. By default, the machine will play music in the TF card as a preferred if there is
a TF card in the TF card slot.
9. Anti-Skid Design & Portable Night-Light
It can be easily used as a portable night-light or hanging speaker for house-hold or
outdoor travel use; with an anti-skid buttons, it can tightly stick to any devices.
USERS ADVICES
Based on legislative decree no. 49 dated 14th March, 2014
“Execution of Directive 2012/19/UE about electrical and electronic
equipment waste (WEEE)”
This marking indicates that this product should not be disposed with other household
wastes, but it should be disposed separately from other wastes. Therefore, the
user should bring the product with all essential components to recycling centers for
electrical and electronic wastes, or return to retailer before to buy a new product
as equivalent type, in the ratio of 1 to 1, or 1 to 0 for products that have larger side
lesser of 25cm. Correct disposal of your old appliance will help to prevent potential
damage to the environment and to human health and support materials recycling.
The unlawful disposal of the product should involve for users administrative sanctions
based on Legislative Decree no. 49 dated 14th March, 2014.
The device contains batteries covered by European Directive 2013/56/EU
and they can not be disposed together with domestic wastes. Please inform
yourself about local rules on separated disposal for batteries:
a correct disposal helps to avoid negative consequences for the environment and
health. Battery is built-in, it must be disposal at the end of product life, it can not be
removed by end user. In this case, disposal and recycling centers can disassembly of
the product and they can remove batteries.
Hereby, TJ POINT Srl declares that the NT-LSP01 product complies with the essential
requirements and ther relevant provisions of Directive 1999/05/EC, 2014/30/
EU, 2014/35/EU, 2011/65/EU and 2009/125/EC. The Declaration of Conformity in
complete form is available at the company Tj Point Srl, Via A. Grandi 13A, 60131
Ancona (Italy) or by visiting www.nodis.it
Produced by: Tj Point Srl, Distributed by: Nodis Srl, MADE IN CINA
Via A. Grandi 13A, 60131 Viale Fulvio Testi 126, 20092
Ancona (Italy) Cinisello Balsamo (MI)
User manual
www.nodis.it
10 9 8 7
sunlight
Version no.: V01 Edition date: 30/08/2016
PLEASE READ CAREFULLY THIS USER MANUAL AND STORE IT FOR FUTURE
USES.
Product’s specication:
- Light function: warm light, candle light, RGB light
- Multifunction: Bluetooth Speaker / SD card slot to play music / AUX IN to connect to
smart phones and Mp3 players / Alarm Clock
- 3 levels of brightness
- LED Power consumption: 2W
- Luminous ux : 16 Lm
- Color temperature: 2800-3200K
- Quantity of LEDS: Warm light: 8pcs RGB light: 8pcs
- Working temperature:-5°C to 45°C
- LED working time: 30.000hrs
- CRI>80
- Brightness: >12lux at 30cm
- LED light working time: 4-7h (depends on light brightness)
- Beam Angle: 100°
- Instant lighting
- Not suitable for accent lighting
- Bluetooth: 2.1+EDR
- Speaker output power: 3W
- Frequency: 50HZ - 20KHZ
- Signal-to noise: 85db
- Max Bluetooth distance: 10m
- Music running time: 6h
- Input: DC 5V 1A
- Built-in 3.7V 1500mAh Lithium battery
- Product size:ø95x125 mm
- Accessories Included: 1pc USB cable and 1pc Aux in cable
Caution:
• Please do not disassemble the product as it may cause safety problems such as
electric danger.
• Please use transformer and power outlet approved by the manufacturer to keep a
proper operation of your product.
• To avoid damage to the product’s joint, please do not make frequent work on the
joint adjustment.
• Please do not place the product on any shaky desk to avoid damage due to the
drop.
• Please do not place it under the high humidity or high temperature environment.
• To avoid damage to your eyes, please do not look at the LED light directly.
• If there is any problem in use, you can contact the customer service staff for help:
• Damaged power line or damaged power plug;
• When the lamp holder suffers from damp or rain;
• Damaged lamp holder’s shell or damaged joint;
• Lamp holder with emitted smoke or sparks or other unsafe factors;
• Unusual LED light is blinking or damage to the LED light.
Long press the M key allow you to switch the LCD light mode, which is including warm
light, candle light and breathing light.
3. Play Music
Press the Play/Pause key to play or pause music, short press to the last
music, short press to the next music, long press to a volume down, long
press to a volume up.
4. Light Mode
Warm light
Warm light is the default start. Continue to press the loudspeaker grille on the top of
the product to allow you to increase the brightness gradually. With each press the
brightness will be increased by one level.
The third press allows you to make the brightest light.
The fourth press will once allow you to make the brightness back to the minimum by
30%. Then with a long press will allow you to close the light.
RGB Light and candle light
Long press M key to turn on the machine into the candle light
mode. With a short press on the loudspeaker grille will change
the light color. With a long press on the loudspeaker grille will
close the RGB light.
5. Clock and alarm
Alarm clock setting
With the rst press on the key or key, you will adjust the alarm through “+” or “-“
key, short press the key again to adjust minute through “+/-“ key.
“+” key
With the rst short press on the key or key to adjust hour, then take a short
press on the “+” key, the number of the hour will go up; take the second short press
on the key or key to adjust minute, then take a short press on the “-“ key, the
number of the minute of the minute will go down.
“-“ key
With the rst short press on the key or key to adjust hour, then take a short
press on the “-“ key, the number of the hour will go down, then take the second short
press on the “-” key, the number of the minute will go up.
6. USB Interface
You can charge the machine by the USB interface.
Red indicator light keeps on when charging, when fully charged, it will turn to green.
The light will be off if USB is not plugged in.
7. AUX Audio Input
Please insert audio wire plug for receiving audio frequency (it will
change into AUX mode automatically). With the audio wire connection,
the Bluetooth function will be closed whereas when pulling out the
wire will switch back to the Bluetooth mode again.
Product functions and features
• This product is equipped with advanced luminous technology without dizzy light or
frequently ash The light is soft enough to protect your eyes
• It has a super long service life.
• It has a touch surface on which you can adjust the brightness freely by an easy
operation
• Fashion style with optional mode: Bluetooth / Audio Input / TF card
• 1800mAh Lithium Polymer Battery
• It is an anti-skid design
• It can be regarded as a hanging night-light for a household or outdoor use
• 1/3 Power Charge: lower power than traditional ones
• No ultraviolet radiation: do not hurt your skin
• Rainbow light effect: optionally choose one of the 7 colors
• Vision light: anti-dazzle lter
• Vivid color: natural light
• Controlled color temperature
• Environment-protective material: without mercury or lead
Technical specication
Material ABS+PP Input Power DC 5V 1A Bluetooth
standard
Bluetooth 2.1 +
EDR
Output power 3W Battery
capacity
1800mAh Product size 95x95x125MM
Key-press mode Touch / Key Press
Operation Instruction
1. On / Off Key
Long press the power key to turn on and off the machine with a voice prompt.
After turning on the machine, the automatic Bluetooth will be ready to pair and begin
to search for the other equipment to pair. Once any Bluetooth equipment has been
successfully matched, their will be another voice prompt. You can use any Bluetooth
equipment to play your favorite music by searching the link S2. It will connect
automatically whenever the machine starts.
Remark: the machine will automatically search the Bluetooth equipment for match in
the rst 3 seconds after the Bluetooth mode’s open. After 3 seconds, you will need
to choose the Bluetooth equipment with manually connecting. Short press the power
key to turn on and off the Bluetooth. The Bluetooth can work over a range of about
10 meters.
2. M key
Short press the M Key to allow you to switch mode among Bluetooth / SD / AUX.
(There will be mode when operation, whereas skipping-mode without operation, for
example you can successfully switch to the SD card mode only when you have put
the TF card into the TF card slot). Bluetooth is prior when SD card and AUX are
inserted simultaneously.
8. TF Card Mode
With a smart decoding function, the product can play all of the storing music in the TF
card. By default, the machine will play music in the TF card as a preferred if there is
a TF card in the TF card slot.
9. Anti-Skid Design & Portable Night-Light
It can be easily used as a portable night-light or hanging speaker for house-hold or
outdoor travel use; with an anti-skid buttons, it can tightly stick to any devices.
USERS ADVICES
Based on legislative decree no. 49 dated 14th March, 2014
“Execution of Directive 2012/19/UE about electrical and electronic
equipment waste (WEEE)”
This marking indicates that this product should not be disposed with other household
wastes, but it should be disposed separately from other wastes. Therefore, the
user should bring the product with all essential components to recycling centers for
electrical and electronic wastes, or return to retailer before to buy a new product
as equivalent type, in the ratio of 1 to 1, or 1 to 0 for products that have larger side
lesser of 25cm. Correct disposal of your old appliance will help to prevent potential
damage to the environment and to human health and support materials recycling.
The unlawful disposal of the product should involve for users administrative sanctions
based on Legislative Decree no. 49 dated 14th March, 2014.
The device contains batteries covered by European Directive 2013/56/EU
and they can not be disposed together with domestic wastes. Please inform
yourself about local rules on separated disposal for batteries:
a correct disposal helps to avoid negative consequences for the environment and
health. Battery is built-in, it must be disposal at the end of product life, it can not be
removed by end user. In this case, disposal and recycling centers can disassembly of
the product and they can remove batteries.
Hereby, TJ POINT Srl declares that the NT-LSP01 product complies with the essential
requirements and ther relevant provisions of Directive 1999/05/EC, 2014/30/
EU, 2014/35/EU, 2011/65/EU and 2009/125/EC. The Declaration of Conformity in
complete form is available at the company Tj Point Srl, Via A. Grandi 13A, 60131
Ancona (Italy) or by visiting www.nodis.it
Produced by: Tj Point Srl, Distributed by: Nodis Srl, MADE IN CINA
Via A. Grandi 13A, 60131 Viale Fulvio Testi 126, 20092
Ancona (Italy) Cinisello Balsamo (MI)
User manual
www.nodis.it
10 9 8 7
sunlight
Version no.: V01 Edition date: 30/08/2016
PLEASE READ CAREFULLY THIS USER MANUAL AND STORE IT FOR FUTURE
USES.
Product’s specication:
- Light function: warm light, candle light, RGB light
- Multifunction: Bluetooth Speaker / SD card slot to play music / AUX IN to connect to
smart phones and Mp3 players / Alarm Clock
- 3 levels of brightness
- LED Power consumption: 2W
- Luminous ux : 16 Lm
- Color temperature: 2800-3200K
- Quantity of LEDS: Warm light: 8pcs RGB light: 8pcs
- Working temperature:-5°C to 45°C
- LED working time: 30.000hrs
- CRI>80
- Brightness: >12lux at 30cm
- LED light working time: 4-7h (depends on light brightness)
- Beam Angle: 100°
- Instant lighting
- Not suitable for accent lighting
- Bluetooth: 2.1+EDR
- Speaker output power: 3W
- Frequency: 50HZ - 20KHZ
- Signal-to noise: 85db
- Max Bluetooth distance: 10m
- Music running time: 6h
- Input: DC 5V 1A
- Built-in 3.7V 1500mAh Lithium battery
- Product size:ø95x125 mm
- Accessories Included: 1pc USB cable and 1pc Aux in cable
Caution:
• Please do not disassemble the product as it may cause safety problems such as
electric danger.
• Please use transformer and power outlet approved by the manufacturer to keep a
proper operation of your product.
• To avoid damage to the product’s joint, please do not make frequent work on the
joint adjustment.
• Please do not place the product on any shaky desk to avoid damage due to the
drop.
• Please do not place it under the high humidity or high temperature environment.
• To avoid damage to your eyes, please do not look at the LED light directly.
• If there is any problem in use, you can contact the customer service staff for help:
• Damaged power line or damaged power plug;
• When the lamp holder suffers from damp or rain;
• Damaged lamp holder’s shell or damaged joint;
• Lamp holder with emitted smoke or sparks or other unsafe factors;
• Unusual LED light is blinking or damage to the LED light.
Long press the M key allow you to switch the LCD light mode, which is including warm
light, candle light and breathing light.
3. Play Music
Press the Play/Pause key to play or pause music, short press to the last
music, short press to the next music, long press to a volume down, long
press to a volume up.
4. Light Mode
Warm light
Warm light is the default start. Continue to press the loudspeaker grille on the top of
the product to allow you to increase the brightness gradually. With each press the
brightness will be increased by one level.
The third press allows you to make the brightest light.
The fourth press will once allow you to make the brightness back to the minimum by
30%. Then with a long press will allow you to close the light.
RGB Light and candle light
Long press M key to turn on the machine into the candle light
mode. With a short press on the loudspeaker grille will change
the light color. With a long press on the loudspeaker grille will
close the RGB light.
5. Clock and alarm
Alarm clock setting
With the rst press on the key or key, you will adjust the alarm through “+” or “-“
key, short press the key again to adjust minute through “+/-“ key.
“+” key
With the rst short press on the key or key to adjust hour, then take a short
press on the “+” key, the number of the hour will go up; take the second short press
on the key or key to adjust minute, then take a short press on the “-“ key, the
number of the minute of the minute will go down.
“-“ key
With the rst short press on the key or key to adjust hour, then take a short
press on the “-“ key, the number of the hour will go down, then take the second short
press on the “-” key, the number of the minute will go up.
6. USB Interface
You can charge the machine by the USB interface.
Red indicator light keeps on when charging, when fully charged, it will turn to green.
The light will be off if USB is not plugged in.
7. AUX Audio Input
Please insert audio wire plug for receiving audio frequency (it will
change into AUX mode automatically). With the audio wire connection,
the Bluetooth function will be closed whereas when pulling out the
wire will switch back to the Bluetooth mode again.
Product functions and features
• This product is equipped with advanced luminous technology without dizzy light or
frequently ash The light is soft enough to protect your eyes
• It has a super long service life.
• It has a touch surface on which you can adjust the brightness freely by an easy
operation
• Fashion style with optional mode: Bluetooth / Audio Input / TF card
• 1800mAh Lithium Polymer Battery
• It is an anti-skid design
• It can be regarded as a hanging night-light for a household or outdoor use
• 1/3 Power Charge: lower power than traditional ones
• No ultraviolet radiation: do not hurt your skin
• Rainbow light effect: optionally choose one of the 7 colors
• Vision light: anti-dazzle lter
• Vivid color: natural light
• Controlled color temperature
• Environment-protective material: without mercury or lead
Technical specication
Material ABS+PP Input Power DC 5V 1A Bluetooth
standard
Bluetooth 2.1 +
EDR
Output power 3W Battery
capacity
1800mAh Product size 95x95x125MM
Key-press mode Touch / Key Press
Operation Instruction
1. On / Off Key
Long press the power key to turn on and off the machine with a voice prompt.
After turning on the machine, the automatic Bluetooth will be ready to pair and begin
to search for the other equipment to pair. Once any Bluetooth equipment has been
successfully matched, their will be another voice prompt. You can use any Bluetooth
equipment to play your favorite music by searching the link S2. It will connect
automatically whenever the machine starts.
Remark: the machine will automatically search the Bluetooth equipment for match in
the rst 3 seconds after the Bluetooth mode’s open. After 3 seconds, you will need
to choose the Bluetooth equipment with manually connecting. Short press the power
key to turn on and off the Bluetooth. The Bluetooth can work over a range of about
10 meters.
2. M key
Short press the M Key to allow you to switch mode among Bluetooth / SD / AUX.
(There will be mode when operation, whereas skipping-mode without operation, for
example you can successfully switch to the SD card mode only when you have put
the TF card into the TF card slot). Bluetooth is prior when SD card and AUX are
inserted simultaneously.
8. TF Card Mode
With a smart decoding function, the product can play all of the storing music in the TF
card. By default, the machine will play music in the TF card as a preferred if there is
a TF card in the TF card slot.
9. Anti-Skid Design & Portable Night-Light
It can be easily used as a portable night-light or hanging speaker for house-hold or
outdoor travel use; with an anti-skid buttons, it can tightly stick to any devices.
USERS ADVICES
Based on legislative decree no. 49 dated 14th March, 2014
“Execution of Directive 2012/19/UE about electrical and electronic
equipment waste (WEEE)”
This marking indicates that this product should not be disposed with other household
wastes, but it should be disposed separately from other wastes. Therefore, the
user should bring the product with all essential components to recycling centers for
electrical and electronic wastes, or return to retailer before to buy a new product
as equivalent type, in the ratio of 1 to 1, or 1 to 0 for products that have larger side
lesser of 25cm. Correct disposal of your old appliance will help to prevent potential
damage to the environment and to human health and support materials recycling.
The unlawful disposal of the product should involve for users administrative sanctions
based on Legislative Decree no. 49 dated 14th March, 2014.
The device contains batteries covered by European Directive 2013/56/EU
and they can not be disposed together with domestic wastes. Please inform
yourself about local rules on separated disposal for batteries:
a correct disposal helps to avoid negative consequences for the environment and
health. Battery is built-in, it must be disposal at the end of product life, it can not be
removed by end user. In this case, disposal and recycling centers can disassembly of
the product and they can remove batteries.
Hereby, TJ POINT Srl declares that the NT-LSP01 product complies with the essential
requirements and ther relevant provisions of Directive 1999/05/EC, 2014/30/
EU, 2014/35/EU, 2011/65/EU and 2009/125/EC. The Declaration of Conformity in
complete form is available at the company Tj Point Srl, Via A. Grandi 13A, 60131
Ancona (Italy) or by visiting www.nodis.it
Produced by: Tj Point Srl, Distributed by: Nodis Srl, MADE IN CINA
Via A. Grandi 13A, 60131 Viale Fulvio Testi 126, 20092
Ancona (Italy) Cinisello Balsamo (MI)
User manual
www.nodis.it
10 9 8 7
sunlight
Version no.: V01 Edition date: 30/08/2016
PLEASE READ CAREFULLY THIS USER MANUAL AND STORE IT FOR FUTURE
USES.
Product’s specication:
- Light function: warm light, candle light, RGB light
- Multifunction: Bluetooth Speaker / SD card slot to play music / AUX IN to connect to
smart phones and Mp3 players / Alarm Clock
- 3 levels of brightness
- LED Power consumption: 2W
- Luminous ux : 16 Lm
- Color temperature: 2800-3200K
- Quantity of LEDS: Warm light: 8pcs RGB light: 8pcs
- Working temperature:-5°C to 45°C
- LED working time: 30.000hrs
- CRI>80
- Brightness: >12lux at 30cm
- LED light working time: 4-7h (depends on light brightness)
- Beam Angle: 100°
- Instant lighting
- Not suitable for accent lighting
- Bluetooth: 2.1+EDR
- Speaker output power: 3W
- Frequency: 50HZ - 20KHZ
- Signal-to noise: 85db
- Max Bluetooth distance: 10m
- Music running time: 6h
- Input: DC 5V 1A
- Built-in 3.7V 1500mAh Lithium battery
- Product size:ø95x125 mm
- Accessories Included: 1pc USB cable and 1pc Aux in cable
Caution:
• Please do not disassemble the product as it may cause safety problems such as
electric danger.
• Please use transformer and power outlet approved by the manufacturer to keep a
proper operation of your product.
• To avoid damage to the product’s joint, please do not make frequent work on the
joint adjustment.
• Please do not place the product on any shaky desk to avoid damage due to the
drop.
• Please do not place it under the high humidity or high temperature environment.
• To avoid damage to your eyes, please do not look at the LED light directly.
• If there is any problem in use, you can contact the customer service staff for help:
• Damaged power line or damaged power plug;
• When the lamp holder suffers from damp or rain;
• Damaged lamp holder’s shell or damaged joint;
• Lamp holder with emitted smoke or sparks or other unsafe factors;
• Unusual LED light is blinking or damage to the LED light.
Long press the M key allow you to switch the LCD light mode, which is including warm
light, candle light and breathing light.
3. Play Music
Press the Play/Pause key to play or pause music, short press to the last
music, short press to the next music, long press to a volume down, long
press to a volume up.
4. Light Mode
Warm light
Warm light is the default start. Continue to press the loudspeaker grille on the top of
the product to allow you to increase the brightness gradually. With each press the
brightness will be increased by one level.
The third press allows you to make the brightest light.
The fourth press will once allow you to make the brightness back to the minimum by
30%. Then with a long press will allow you to close the light.
RGB Light and candle light
Long press M key to turn on the machine into the candle light
mode. With a short press on the loudspeaker grille will change
the light color. With a long press on the loudspeaker grille will
close the RGB light.
5. Clock and alarm
Alarm clock setting
With the rst press on the key or key, you will adjust the alarm through “+” or “-“
key, short press the key again to adjust minute through “+/-“ key.
“+” key
With the rst short press on the key or key to adjust hour, then take a short
press on the “+” key, the number of the hour will go up; take the second short press
on the key or key to adjust minute, then take a short press on the “-“ key, the
number of the minute of the minute will go down.
“-“ key
With the rst short press on the key or key to adjust hour, then take a short
press on the “-“ key, the number of the hour will go down, then take the second short
press on the “-” key, the number of the minute will go up.
6. USB Interface
You can charge the machine by the USB interface.
Red indicator light keeps on when charging, when fully charged, it will turn to green.
The light will be off if USB is not plugged in.
7. AUX Audio Input
Please insert audio wire plug for receiving audio frequency (it will
change into AUX mode automatically). With the audio wire connection,
the Bluetooth function will be closed whereas when pulling out the
wire will switch back to the Bluetooth mode again.
Product functions and features
• This product is equipped with advanced luminous technology without dizzy light or
frequently ash The light is soft enough to protect your eyes
• It has a super long service life.
• It has a touch surface on which you can adjust the brightness freely by an easy
operation
• Fashion style with optional mode: Bluetooth / Audio Input / TF card
• 1800mAh Lithium Polymer Battery
• It is an anti-skid design
• It can be regarded as a hanging night-light for a household or outdoor use
• 1/3 Power Charge: lower power than traditional ones
• No ultraviolet radiation: do not hurt your skin
• Rainbow light effect: optionally choose one of the 7 colors
• Vision light: anti-dazzle lter
• Vivid color: natural light
• Controlled color temperature
• Environment-protective material: without mercury or lead
Technical specication
Material ABS+PP Input Power DC 5V 1A Bluetooth
standard
Bluetooth 2.1 +
EDR
Output power 3W Battery
capacity
1800mAh Product size 95x95x125MM
Key-press mode Touch / Key Press
Operation Instruction
1. On / Off Key
Long press the power key to turn on and off the machine with a voice prompt.
After turning on the machine, the automatic Bluetooth will be ready to pair and begin
to search for the other equipment to pair. Once any Bluetooth equipment has been
successfully matched, their will be another voice prompt. You can use any Bluetooth
equipment to play your favorite music by searching the link S2. It will connect
automatically whenever the machine starts.
Remark: the machine will automatically search the Bluetooth equipment for match in
the rst 3 seconds after the Bluetooth mode’s open. After 3 seconds, you will need
to choose the Bluetooth equipment with manually connecting. Short press the power
key to turn on and off the Bluetooth. The Bluetooth can work over a range of about
10 meters.
2. M key
Short press the M Key to allow you to switch mode among Bluetooth / SD / AUX.
(There will be mode when operation, whereas skipping-mode without operation, for
example you can successfully switch to the SD card mode only when you have put
the TF card into the TF card slot). Bluetooth is prior when SD card and AUX are
inserted simultaneously.
8. TF Card Mode
With a smart decoding function, the product can play all of the storing music in the TF
card. By default, the machine will play music in the TF card as a preferred if there is
a TF card in the TF card slot.
9. Anti-Skid Design & Portable Night-Light
It can be easily used as a portable night-light or hanging speaker for house-hold or
outdoor travel use; with an anti-skid buttons, it can tightly stick to any devices.
USERS ADVICES
Based on legislative decree no. 49 dated 14th March, 2014
“Execution of Directive 2012/19/UE about electrical and electronic
equipment waste (WEEE)”
This marking indicates that this product should not be disposed with other household
wastes, but it should be disposed separately from other wastes. Therefore, the
user should bring the product with all essential components to recycling centers for
electrical and electronic wastes, or return to retailer before to buy a new product
as equivalent type, in the ratio of 1 to 1, or 1 to 0 for products that have larger side
lesser of 25cm. Correct disposal of your old appliance will help to prevent potential
damage to the environment and to human health and support materials recycling.
The unlawful disposal of the product should involve for users administrative sanctions
based on Legislative Decree no. 49 dated 14th March, 2014.
The device contains batteries covered by European Directive 2013/56/EU
and they can not be disposed together with domestic wastes. Please inform
yourself about local rules on separated disposal for batteries:
a correct disposal helps to avoid negative consequences for the environment and
health. Battery is built-in, it must be disposal at the end of product life, it can not be
removed by end user. In this case, disposal and recycling centers can disassembly of
the product and they can remove batteries.
Hereby, TJ POINT Srl declares that the NT-LSP01 product complies with the essential
requirements and ther relevant provisions of Directive 1999/05/EC, 2014/30/
EU, 2014/35/EU, 2011/65/EU and 2009/125/EC. The Declaration of Conformity in
complete form is available at the company Tj Point Srl, Via A. Grandi 13A, 60131
Ancona (Italy) or by visiting www.nodis.it
Produced by: Tj Point Srl, Distributed by: Nodis Srl, MADE IN CINA
Via A. Grandi 13A, 60131 Viale Fulvio Testi 126, 20092
Ancona (Italy) Cinisello Balsamo (MI)
User manual
www.nodis.it
10 9 8 7
sunlight
Version no.: V01 Edition date: 30/08/2016
PLEASE READ CAREFULLY THIS USER MANUAL AND STORE IT FOR FUTURE
USES.
Product’s specication:
- Light function: warm light, candle light, RGB light
- Multifunction: Bluetooth Speaker / SD card slot to play music / AUX IN to connect to
smart phones and Mp3 players / Alarm Clock
- 3 levels of brightness
- LED Power consumption: 2W
- Luminous ux : 16 Lm
- Color temperature: 2800-3200K
- Quantity of LEDS: Warm light: 8pcs RGB light: 8pcs
- Working temperature:-5°C to 45°C
- LED working time: 30.000hrs
- CRI>80
- Brightness: >12lux at 30cm
- LED light working time: 4-7h (depends on light brightness)
- Beam Angle: 100°
- Instant lighting
- Not suitable for accent lighting
- Bluetooth: 2.1+EDR
- Speaker output power: 3W
- Frequency: 50HZ - 20KHZ
- Signal-to noise: 85db
- Max Bluetooth distance: 10m
- Music running time: 6h
- Input: DC 5V 1A
- Built-in 3.7V 1500mAh Lithium battery
- Product size:ø95x125 mm
- Accessories Included: 1pc USB cable and 1pc Aux in cable
Caution:
• Please do not disassemble the product as it may cause safety problems such as
electric danger.
• Please use transformer and power outlet approved by the manufacturer to keep a
proper operation of your product.
• To avoid damage to the product’s joint, please do not make frequent work on the
joint adjustment.
• Please do not place the product on any shaky desk to avoid damage due to the
drop.
• Please do not place it under the high humidity or high temperature environment.
• To avoid damage to your eyes, please do not look at the LED light directly.
• If there is any problem in use, you can contact the customer service staff for help:
• Damaged power line or damaged power plug;
• When the lamp holder suffers from damp or rain;
• Damaged lamp holder’s shell or damaged joint;
• Lamp holder with emitted smoke or sparks or other unsafe factors;
• Unusual LED light is blinking or damage to the LED light.
Long press the M key allow you to switch the LCD light mode, which is including warm
light, candle light and breathing light.
3. Play Music
Press the Play/Pause key to play or pause music, short press to the last
music, short press to the next music, long press to a volume down, long
press to a volume up.
4. Light Mode
Warm light
Warm light is the default start. Continue to press the loudspeaker grille on the top of
the product to allow you to increase the brightness gradually. With each press the
brightness will be increased by one level.
The third press allows you to make the brightest light.
The fourth press will once allow you to make the brightness back to the minimum by
30%. Then with a long press will allow you to close the light.
RGB Light and candle light
Long press M key to turn on the machine into the candle light
mode. With a short press on the loudspeaker grille will change
the light color. With a long press on the loudspeaker grille will
close the RGB light.
5. Clock and alarm
Alarm clock setting
With the rst press on the key or key, you will adjust the alarm through “+” or “-“
key, short press the key again to adjust minute through “+/-“ key.
“+” key
With the rst short press on the key or key to adjust hour, then take a short
press on the “+” key, the number of the hour will go up; take the second short press
on the key or key to adjust minute, then take a short press on the “-“ key, the
number of the minute of the minute will go down.
“-“ key
With the rst short press on the key or key to adjust hour, then take a short
press on the “-“ key, the number of the hour will go down, then take the second short
press on the “-” key, the number of the minute will go up.
6. USB Interface
You can charge the machine by the USB interface.
Red indicator light keeps on when charging, when fully charged, it will turn to green.
The light will be off if USB is not plugged in.
7. AUX Audio Input
Please insert audio wire plug for receiving audio frequency (it will
change into AUX mode automatically). With the audio wire connection,
the Bluetooth function will be closed whereas when pulling out the
wire will switch back to the Bluetooth mode again.
Product functions and features
• This product is equipped with advanced luminous technology without dizzy light or
frequently ash The light is soft enough to protect your eyes
• It has a super long service life.
• It has a touch surface on which you can adjust the brightness freely by an easy
operation
• Fashion style with optional mode: Bluetooth / Audio Input / TF card
• 1800mAh Lithium Polymer Battery
• It is an anti-skid design
• It can be regarded as a hanging night-light for a household or outdoor use
• 1/3 Power Charge: lower power than traditional ones
• No ultraviolet radiation: do not hurt your skin
• Rainbow light effect: optionally choose one of the 7 colors
• Vision light: anti-dazzle lter
• Vivid color: natural light
• Controlled color temperature
• Environment-protective material: without mercury or lead
Technical specication
Material ABS+PP Input Power DC 5V 1A Bluetooth
standard
Bluetooth 2.1 +
EDR
Output power 3W Battery
capacity
1800mAh Product size 95x95x125MM
Key-press mode Touch / Key Press
Operation Instruction
1. On / Off Key
Long press the power key to turn on and off the machine with a voice prompt.
After turning on the machine, the automatic Bluetooth will be ready to pair and begin
to search for the other equipment to pair. Once any Bluetooth equipment has been
successfully matched, their will be another voice prompt. You can use any Bluetooth
equipment to play your favorite music by searching the link S2. It will connect
automatically whenever the machine starts.
Remark: the machine will automatically search the Bluetooth equipment for match in
the rst 3 seconds after the Bluetooth mode’s open. After 3 seconds, you will need
to choose the Bluetooth equipment with manually connecting. Short press the power
key to turn on and off the Bluetooth. The Bluetooth can work over a range of about
10 meters.
2. M key
Short press the M Key to allow you to switch mode among Bluetooth / SD / AUX.
(There will be mode when operation, whereas skipping-mode without operation, for
example you can successfully switch to the SD card mode only when you have put
the TF card into the TF card slot). Bluetooth is prior when SD card and AUX are
inserted simultaneously.
8. TF Card Mode
With a smart decoding function, the product can play all of the storing music in the TF
card. By default, the machine will play music in the TF card as a preferred if there is
a TF card in the TF card slot.
9. Anti-Skid Design & Portable Night-Light
It can be easily used as a portable night-light or hanging speaker for house-hold or
outdoor travel use; with an anti-skid buttons, it can tightly stick to any devices.
USERS ADVICES
Based on legislative decree no. 49 dated 14th March, 2014
“Execution of Directive 2012/19/UE about electrical and electronic
equipment waste (WEEE)”
This marking indicates that this product should not be disposed with other household
wastes, but it should be disposed separately from other wastes. Therefore, the
user should bring the product with all essential components to recycling centers for
electrical and electronic wastes, or return to retailer before to buy a new product
as equivalent type, in the ratio of 1 to 1, or 1 to 0 for products that have larger side
lesser of 25cm. Correct disposal of your old appliance will help to prevent potential
damage to the environment and to human health and support materials recycling.
The unlawful disposal of the product should involve for users administrative sanctions
based on Legislative Decree no. 49 dated 14th March, 2014.
The device contains batteries covered by European Directive 2013/56/EU
and they can not be disposed together with domestic wastes. Please inform
yourself about local rules on separated disposal for batteries:
a correct disposal helps to avoid negative consequences for the environment and
health. Battery is built-in, it must be disposal at the end of product life, it can not be
removed by end user. In this case, disposal and recycling centers can disassembly of
the product and they can remove batteries.
Hereby, TJ POINT Srl declares that the NT-LSP01 product complies with the essential
requirements and ther relevant provisions of Directive 1999/05/EC, 2014/30/
EU, 2014/35/EU, 2011/65/EU and 2009/125/EC. The Declaration of Conformity in
complete form is available at the company Tj Point Srl, Via A. Grandi 13A, 60131
Ancona (Italy) or by visiting www.nodis.it
Produced by: Tj Point Srl, Distributed by: Nodis Srl, MADE IN CINA
Via A. Grandi 13A, 60131 Viale Fulvio Testi 126, 20092
Ancona (Italy) Cinisello Balsamo (MI)
Table of contents
