Nolan TG2059 User manual

>>>assembly instructions
Nolan
Leather Occasional Chair
style # TG2059
dpci # 249-13-0003

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck-though we’re confident you won’t need it.
Before you begin
1. Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference DPCI #
249-13-0003.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

introduction 2
hardware 4
parts list 5
assembly 6~8
adjusting the levelers
9
3
table of contents
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846). For faster service, have the style number and DPCI number ready when calling.

hardware
4
(H3) x 3
spring washer
Ø12.5mm
(H6) x1
allen key
(H2) X 3
flat washer
Ø 22mm
(H1) x 3
hex socket head bolt
2.5"
(H4) x 4
hex socket head bolt
3.5"
(H5) X 4
flat washer
Ø 19mm

ITEM
DESCRIPTION
QUANTITY
A 1
B 1
C 2
D 2
5
front leg
seat frame
chair back
back leg
C
D
A
B
C
D
A
B
C

step 1.
6
1.) Attach chair back (A) to seat frame (B) by inserting the
metal brackets on chair back (A) into the metal glides on
seat frame (B) as shown in Photo #1. Push the chair back
(A) with a downward force to secure it into place.
Note-the bottom of chair back (A) must sit flush with the
bottom of the seat frame (B) as shown in Photo #2.
A
B
A
PHOTO 1 PHOTO 2
A
B
A
B

step 2.
7
(H3) x 3
spring washer
Ø12.5mm
(H2) X 3
flat washer
Ø 22mm
(H1) x 3
hex socket head
bolt 2.5"
(H6) x1
allen key
1.) With the help of another person, gently turn the unit upside down and pull back
the fabric lining underneath chair back (A).
2.) Secure chair back (A) to seat frame (B) with flat washers (H2), spring washers
(H3) and hex socket head bolts (H1). Use Allen Key (H6) to tighten the bolts.
3.) Place the fabric lining back into place.
Note: Periodically check bolts and retighten as necessary. Keep allen key (H6) for future
use.
H6
H1
H3
H2
A
B

step 3.
8
1.) Attach back legs (D) to chair back (A) with flat washers (H5) and hex socket
head bolts (H4) .Use Allen Key (H6) to tighten the bolts.
2.) Attach front legs (C) to seat frame (B) with flat washers (H5) and hex socket
head bolts (H4).Use Allen Key (H6) to tighten the bolts.
3.) Turn the chair upright.
Note: Periodically check bolts and screws and retighten as necessary. Keep allen key
(H6) for future use.
(H6) x1
allen key
(H4) x 4
hex socket head bolt
3.5"
(H5) X 4
flat washer
Ø 19mm
D
H6
H4
H5
C
H4
H5
H6
B
A
C
CD
D

adjusting the levelers
9
Back legs (D) are equipped with adjustable levelers. Before placing this item in the
desired location, make sure that the club chair rests evenly on the floor by turning the
adjustable levelers clockwise or counter clockwise (as needed).
D

© 2008 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.