nordkraft PURO LP-65D User manual
www.nordkraft.systems
PURO LP-65D
Woofer: 160 mm polypropylene cone with mica,
rubber surround, dual 25 mm voice coil
Tweeters: 2x13 mm mylar dome, swivel 30 degrees,
neodymium magnet, wide dispersion
Tweeter protection: Polyimide auto protective reset
switch
Recommended amplication: 2x10~125 W
Maximum power: 2x125 W
Impedance: 8 Ohm per input
Sensitivity: 88 dB
Frequency response: 55-22,000 Hz
Cutout size: 204 mm
Mounting depth: 92 mm
Maximum surface thickness: 33 mm
Discrete 6.5" Stereo In-Ceiling Speaker
Discrete 6.5" Stereo In-Ceiling Speaker
This product is warranted free of defects in workmanship and
materials on purchase. If the goods are found to be defective within the
warranty period, they will be repaired or replaced, at company’s option,
without charge on return to the vendor upon satisfactory proof of
purchase from the vendor and date of purchase. This warranty does not
apply if, in the judgement of the company, the product fails due to
damage from shipment, handling, storage, accident, abuse, or misuse,
or if it has been used or maintained in a manner not conforming to
product manual instructions, has been modified in any way, or has had
any serial number removed or defaced. Repair by anyone other than the
company or an approved agent will void this warranty. The maximum
liability under this warranty is limited to the purchase price of the
product covered by the warranty. The company shall not under any
circumstances be liable to any person for any special, incidental,
indirec t o r consequentia l d amages , including witho ut limitation,
damages resulting from use or malfunction of the products, loss of
profits or revenues or costs of replacement goods, even if the company
is informed in advance of the possibility of such damages.
In the first instance consumers should contact their vendor.
www.nordkraft.systems
©
All rights reserved. Design and specifications are subject to change
without prior notice. No part of this document may be reproduced, for
any purpose, without prior written permission from the company. The
company is not liable for omissions or for technical or editorial errors
herein or for damages directly or indirectly resulting from the use of this
product. ‘ ’ and the ‘nk’ logo are trademarks of .
PURO LP-65D
Introduction
Thank you for purchasing s t e r e o i n - c e i l i n g
speaker. Please read these instructions carefully to
complete your installation quickly and efficiently for
trouble free installation.
Safety Instructions
• Caution: Installation should be carried out and
checked before providing power to the system.
D a m a g e c a u s e d b y i m p r o p e r w i r i n g o r
installation is not covered by the warranty.
• Keep this product away from small children and
animals as it contains small parts.
• Keep this product away from naked flames and
so urc es of i gniti on in clu ding li ght ing . Build ing
regula ti ons ma y require that you install a fi re
hood.
Description
The P U R O LP-65D is designed for installation in
ceilings, or other suitable surfaces such as plasterboard
walls. It is a stereo, two way speaker with 160mm
Polypropylene bass/mid driver and two pivotable 13mm
mylar dome tweeters. The tweeters can be angled 30
degrees in any direction from the centre thanks to their
ball and socket design. A single speaker has a stereo
input and provides directional high frequency output,
ideal for use in hallways or smaller rooms such as
bathrooms.
Speaker grille
Box Contents
1X Instruction Manual
1X PURO LP-65D
In-ceiling Speaker
Cutout Template
Installation Instructions
Be careful when handling the speaker. It is okay to hold
using the tweeter pole but do not touch the drive unit as
it could result in damage.
1. Using the cut out template, draw a 204mm circle on
the ceiling / wall, where you wish to install the
speaker. Ensure there are no joists in the way.
2. Cut out a hole using a suitable saw or hole cutting
tool. Be careful not to cut through wiring or pipes.
To do this, press down on each binding post and feed the
bare cable wire into the hole. Releasing the binding post
will lock the wire in place.
Make sure you connect the speaker cable to the
corresponding + / - outputs from the amplifier.
3. Now pull through the speaker cable and connect it to
the speaker binding posts located on the rear of the
speaker. There are one pair of binding posts per
channel.
4. Place the speaker into the hole, with the black plastic
dog legs on the rear of the speaker tucked in, and
t i g h t e n t h e f o u r s c r e w s w i t h a P h i l l i p s - h e a d
screwdriver.
The dog legs will turn and lock the speaker into the
ceiling / wall. The fixing should be firm but do not
overtighten as this can strip the thread and cause
difficulties for speaker removal.
5. Direct the pivotable tweeters to desired position.
Tweeters
See ‘Additional Features’ section for more details about
these.
6. When you are happy the system is working, apply the
speaker grille to the speaker. The magnets will hold
the grille in place.
Speaker Removal
1. Holding the edges, pull the speaker grille from the
wall or ceiling to release it from the magnets.
2. Unscrew the four screws around the speaker rim and
hold it securely as it loosens. The dog legs should
automatically retract.
3. To release the speaker, gently pull it out from the hole
and disconnect the speaker cables from the binding
posts
Painting Grille
This speaker has a paintable grille which must be
decorated separately and with the correct methods to
avoid directly painting or damaging the drivers.
Peel off the material which has been preapplied to the
rear of the speaker grille. When spraying it, use
suitable methods to ensure the holes are not blocked.
Pivoting tweeters
The PURO LP-65D speaker
i s i d e a l l y s u i t e d f o r
installations where the wall
or ceiling area cannot fit
multiple speakers but where
st ere o sou nd i s desir ed.
Each tweeter has a wide
dispersion and boasts 360
d e g r e e h o u s i n g s , e a c h
adjustable to 30 degrees off axis. They can be used to
widen the stereo field and direct the sound in various
directions.
Additional features
Dimensions
Side
Top
