
7
Deutsch
Antenne verbinden 4
ANSCHLÜSSE VORNEHMEN
Sie können unterschiedliche externe Geräte
mit dem Fernseher verbinden und den
entsprechenden Eingangsmodus zur Auswahl
des externen Geräts einschalten. Informieren
Sie sich in der Bedienungsanleitung Ihres
externen Geräts näher über die Verbindung.
Mögliche externe Geräte: Blu-ray-/DVD-Player,
Audiosysteme, USB-Speichergeräte, PC und
andere externe Geräte.
Antenne/LNB verbinden
Verbinden Sie den Fernseher unter
Verwendung eines RF-Kabels (75 Ω) mit einer
Antennenbuchse�
MAKING CONNECTIONS
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, audio systems, USB
storage devices, PC, and other external
devices.
NOTE
yThe external device connection may differ
from the model.
yConnect external devices to the TV
regardless of the order of the TV port.
yRefer to the external equipment’s manual
for operating instructions.
yIn PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yIn PC mode, some resolution settings
may not work properly depending on the
graphics card.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yUse a signal splitter to use more than 2
TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yIf the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby
Digital.
Antenna connection
SAT/LNB
AERIAL/
CABLE
• Verwenden Sie einen Signalsplitter für die
Nutzung von mehr als 2 Fernsehern�
• Falls die Bildqualität schlecht ist, installieren
Sie ordnungsgemäß einen Signalverstärker,
um die Bildqualität zu verbessern�
• Falls eine Antenne verbunden und die
Bildqualität schlecht ist, versuchen Sie, die
Antenne entsprechend auszurichten�
• Antennenkabel und Konverter sind nicht im
Lieferumfang enthalten�
• Unterstützte DTV-Audioformate: MPEG, Dolby
Digital�
HINWEIS
MAKING CONNECTIONS
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, audio systems, USB
storage devices, PC, and other external
devices.
NOTE
yThe external device connection may differ
from the model.
yConnect external devices to the TV
regardless of the order of the TV port.
yRefer to the external equipment’s manual
for operating instructions.
yIn PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yIn PC mode, some resolution settings
may not work properly depending on the
graphics card.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yUse a signal splitter to use more than 2
TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yIf the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby
Digital.
Antenna connection
SAT/LNB
AERIAL/
CABLE
HINWEIS
• Die Verbindung mit externen Geräten kann je
nach Modell variieren�
• Schließen Sie externe Geräte unabhängig von
der Reihenfolge der TV-Anschlüsse an den
Fernseher an�
• Informieren Sie sich in der Bedienungsanleitung
des externen Geräts über dessen Funktionsweise.
• Im PC-Modus können Störungen in Bezug auf
Auösung, vertikales Muster, Kontrast und
Helligkeit auftreten� Falls Störungen auftreten,
ändern Sie die Auösung des PC-Ausgangs,
ändern Sie die Aktualisierungsrate oder stellen
Sie im BILD-Menü Helligkeit und Kontrast ein,
bis das Bild schärfer ist�
• Einige Auösungen funktionieren im PC-
Modus möglicherweise je nach Grakkarte
nicht ordnungsgemäß�
MAKING CONNECTIONS
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, audio systems, USB
storage devices, PC, and other external
devices.
NOTE
yThe external device connection may differ
from the model.
yConnect external devices to the TV
regardless of the order of the TV port.
yRefer to the external equipment’s manual
for operating instructions.
yIn PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yIn PC mode, some resolution settings
may not work properly depending on the
graphics card.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yUse a signal splitter to use more than 2
TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yIf the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby
Digital.
Antenna connection
SAT/LNB
AERIAL/
CABLE