Northern Lights Fitness IRFT150 User manual

ASSEMBLY INSTRUCTIONS
IRON FACTORY FUNCTIONAL TRAINER, 2X150LB
IRON FACTORY FUNCTIONAL TRAINER, 2X150LB
IRFT150
OVERALL DIMENSIONS: 34.5"L X 53"W X 81"H
11 OCTOBER 2018
Keep This For Warranty
IRFT150
LOT:
1-866-420-4560
Northern Lights Fitness
Products Inc.
MADE IN CANADA
Specification
Weight=426.9 lbs
Packed in 8 Boxes
Box 1
:74"x7"x5-1/2"
:1.65 ft³
:59.3 Lbs
Box 2
:48-1/4"x10"x7-3/4"
:2.164 ft³
:67.6 Lbs
Box 3,4,5,6,7&8
:12.5"x5"x6.25"
:0.226 ft³
:Each 50 Lbs
Keep This For Warranty
IRFT150
LOT:
1-866-420-4560
Northern Lights Fitness
Products Inc.
MADE IN CANADA
Specification
Weight=426.9 lbs
Packed in 8 Boxes
Box 1
:74"x7"x5-1/2"
:1.65 ft³
:59.3 Lbs
Box 2
:48-1/4"x10"x7-3/4"
:2.164 ft³
:67.6 Lbs
Box 3,4,5,6,7&8
:12.5"x5"x6.25"
:0.226 ft³
:Each 50 Lbs

1
4
BOLT SIZE
1
2
1
3
4
1-1
4
2
1-1
2
1-3
4
2-1
4
3
2-1
2
2-3
4
3-1
4
4
3-1
2
3-3
4
4-1
4
5
4-1
2
4-3
4
5-1
4
6
5-1
2
5-3
4
6-1
4
7
6-1
2
6-3
4
Parts List
Page:-2 of 7
Item
No Part QTY. Box/Bag#
1 Base 2 Box#1
2 Base Rear Brace 4 Box#2
3.1 Base Front Pulley Brace-Left 1 Box#2
3.2 Base Front Pulley Brace-Right 1 Box#2
4 Base Front Brace 2 Box#2
5.1 Front upright-Left 1 Box#1
5.2 Front upright-Right 1 Box#1
6 Rear Upright 2 Box#1
7 Rear Connector 1 Box#2
8.1 Top-Left 1 Box#1
8.2 Top-Right 1 Box#1
9 Double Pulley Cable Retainer 2 Box#2
10 Single Pulley Cable Retainer 6 Box#2
11 Adjustable Pulley Bracket 2 Box#2
12 Dual Swivel Pulley Bracket 2 Box#2
13 Top Front Brace 2 Box#2
14 Selector shaft 2 Box#2
15 U-Bracket,Pulley 2 Box#2
16 Guide Rods 4 Box#1
17 Rubber Bumper 8 Bag#2
18 Shaft Collar 4 Bag#2
19 Chin Up Bar 1 Box#2
Item
No Part QTY. Box/Bag#
A 3/8" x 1-3/4" Bolt 8 Bag#1
B 3/8" x 2-3/4" Bolt 8 Bag#1
C 3/8" x 3" Bolt 16 Bag#1
D 3/8" x 3-3/4" Bolt 2 Bag#1
E 3/8" x 4" Bolt 2 Bag#1
F 3/8" x 4-1/2" Bolt 2 Bag#1
G 3/8" x 5-1/2" Bolt 2 Bag#1
H 3/8" Plate Washer 68 Bag#1
I 3/8" Locknut 30 Bag#1
J 3/8" Thin Locknut 10 Bag#1
K 1/2" Jam Nut 2 Bag#1
L Cable Handle 2 Bag#2
M carabiner 2 Bag#2
N Nylon Spacers 3/8" x 1/2" 6 Bag#1
O Nylon Spacers 3/8" x 3/8" 2 Bag#1
P 3-1/2" Pulley 16 Bag#2
Q Selector Pin 2 Bag#2
R Acorn Protection Cap 4 Bag#1
S Weight Stack(15 plates each) 2
Box#3,4,5,6,7&8
(5Plates in
Each box)
AC Cable Assembly 2 Bag#2
WARNING: To reduce the risk of personal injury or damage. We recommend bolting your
equipment in place.Holes have been provided for this purpose.

Page:-3 of 7
7 8.2 8.1 16 6 5.2 5.1 1
S
11 12
15 P
AC Q
M 4
13
L
2
19 9
10
18
N
O
R
17
3.1
3.2
14
Right Right
Right
Left
LeftLeft
15 Plates
Makes One
Stack

Page:-4 of 7
Note: Right side of the assembly shown in detail, Left side is opposite of it.
1. Bolt Base (1) and Rear Upright (6) using the Base Rear Brace (2) and bolting as shown.
2. Bolt Base (1) and Front Upright-Right ((5.2) - Make sure the orientation of the part is as shown
in the figure) using the Base Front Brace (4), Base Front Pulley Brace-Right ((3.2) - Make sure the orientation
of the part is as shown in the figure) and bolting as shown.
3. Slide the Adjustable Pulley Assembly – (Adjustable Pulley Bracket (11) and Dual Swivel Pulley Bracket (12)
Assembly as shown in the figure) from the top of the Front Upright-Right (5.2).
18
P
15
I
A
6
16
K
I
H
B
7
R
D
H
R
I
H
11
A
J
P
S
17
5.2
I
H
4
3.2
C
10
A
I
C
2
I
A
1
H
P
RIGHT
RIGHT
H
Q
14
3.1
5.1
LEFT
LEFT

Page:-5 of 7
4. Like the same way, make the left side assembly using Base (1), Base Rear Brace (2), Rear Upright (6), Front
Upright-Left (5.1), Base Front Brace (4), Base Front Pulley Brace-Left (3.1) and Adjustable Pulley Assembly –
(Adjustable Pulley Bracket (11) and Dual Swivel Pulley Bracket (12) Assembly) as shown in the figure.
5. Bolt the Rear connector (7) to both the Rear Upright (6) as shown.
6. Place 4x Rubber Bumpers (17) over the holes in Base Assembly (1) and slide Guide Rods (16) into them.
NOTE: For improved performance, we recommend you apply a silicone lubricant to the Guide Rods prior
to their installation.
7. Leaning Guide Rods (16) toward you, slide fifteen 10lb Weight Stack (S) & Selector Shaft (14)
onto the Guide Rods (16) as shown.
8. Slide the Shaft Collars (18) onto the Guide Rods (16) as shown.
9. Install the U-Bracket, Pulley (15) to the Selector Shaft (14) using the Jam Nut (K) to tighten it in position.
Note: Right side of the assembly shown in detail, Left side is opposite of it.
10. Positon the Guide Rods (16) in to the Top Beam-Right ((8.2) - Make sure the
orientation of the part is as shown in the figure) and bolt it to the Rear Upright (6).
11. Make the left side assembly using the Top Beam-Left ((8.1) - Make sure the orientation of the part is as
shown in the figure)
12. Bolt the chin up (19) to both the Top Beam-Right (8.2) & Top Beam-Left (8.1) using Top Front Brace (13) as
shown.
I
H
10
J
13
PI
O
NNN
P
10
JJ
I H
8.2
H
B
F
19
P
9
G
E
B
C
H
8.1
RIGHT
LEFT

13. Install the pulleys (P) and Cable (AU) with the Double Pulley Cable Retainer(9), Single Pulley Cable Retainer
(10), and Nylon Spacers (N & O) using the bolting as shown. Start the installation from Start 1 to Finish 8 , take
care to keep the cable in the pulley groove.
14. Clip in the Cable Handle (L) using the Carabiner (M).
WARNING: To reduce the risk of personal injury or damage. We recommend bolting your equipment
in place. Holes have been provided for this purpose.
START
2
3
1
5
4
6
8
7
1
2
3
4
5
6
7
8
START
FINISH
FINISH

NORTHERN LIGHTS
FITNESS PRODUCTS INC.
Dear Customer:
Thank you for selecting Northern Lights Exercise
Equipment. We hope that you will enjoy and
benefit from your new fitness product for years to
come. If you have any questions regarding your
new equipment or would like to find out what
other products are available to add to your
workout, feel free to contact the authorized
Northern Lights showroom in your area.
WARRANTY
Manufacturer’s Limited Lifetime Warranty
Northern Lights Fitness Products Inc. offers its
customers a lifetime warranty against broken
welds and manufacturer defects on all products.
Simply return the defective part, insured and
prepaid to Northern Lights and we will replace it
at no charge. This warranty is for original product
owners and does not cover damage resulting
from product alterations, misuse, abuse,
improper assembly, normal wear and tear or
other conditions, which are beyond our control.
No other express warranty has been made or
will be made on behalf of Northern Lights with
respect to any Northern Lights product or the
operation, repair or replacement of any Northern
Lights product. Northern Lights shall not be
responsible for injury, loss of use of the product,
inconvenience, loss or damage to personal
property, whether direct or indirect. This
warranty does not include any implied warranties
or liability for incidental or consequential
damages created by any provincial or state law.
If you feel that a Northern Lights product is
defective, please contact our parts department at
[phone].
IMPORTANT
Be sure to have all pull-pins locked
and tightened in place, BEFORE
using your equipment.
NORTHERN LIGHTS
FITNESS PRODUCTS INC.
Cher Client:
Merci d’avoir sélectionneé un produit Northern
Lights. Nous espérons que vous aimerez et
bénéficierez de votre nouveau produit pour des
années à venir. Si vous avez des questions
concernant votre nouveau produit ou si vous
aimeriez trouver d’autres produits disponible de
Northern Lights, contactez un détaillant autorisé
Northern Lights.
La GARANTIE
Garantie à Vie Limitée du Fabricant
Northern Lights Fitness Products Inc. offre à ses
clients une garantie à vie contre toutes soudures
casées et contre tout défaut de matériau et de
fabrication dans le cadre d’un entretien soigneux
et d’une utilisation conforme à l’usage prévu
réalisée dans des conditions normales.
Simplement, retrournez la pièce défectueuse à
Northern Lights, payé et ensuré, et nous la
remplacerons sans frais. Cette garantie s’étend
uniquement au propriétraire d’origine seulement
et n’est pas transferable. Elle ne couvre pas les
produits soumis à une mauvaise utilisation, à un
manque de soins, à des accidents, à des
réparations ou à des modifications non
autorisées. Aucune autre garantie n’a été faite ou
sera faite de la part de Northern Lights en ce qui
concerne tout produit de Northern Lights ou son
opération, réparation ou échange. Northern
Lights ne sera pas responsable pour blessure,
perte d’usage du produit, dérangement, perte ou
dommage de propriété personnelle, direct ou
indirect. Cette garantie n’inclut pas toutes autres
garanties implicites pour incidents ou dommages
conséquents créés par les lois provincial ou les
lois d’état. Si un produit de Northern Lights est
défectueux, s’il vous plait contactez notre
département de Pièces et Service au (866) 420-
4560
IMPORTANT
Etre sûr d’avoir toutes les
forceépingles fermées à clef et
resserrées à sa place, avant
d’utiliser votre équipement.
Page:-7 of 7