
Hive cabinet system oor and wall
Warnings
1. Indoor use only.
2. Be careful when unwrapping the product, not to damage the surface.
3. Use a clean and smooth underlay during the installation to avoid damages
and scratches on the furniture and oor.
4. Make sure to tighten screws well during installation.
5. Drilling of holes when xing the boxes to each other leaves permanent
marks. Make sure to choose how to place the boxes in advance.
6. Use correct screws and screwcups for installation on wall. Since dierent
materials demand dierent standards, these parts are not included.
7. Do not sit on this furniture.
8. Do not place really heavy or sharp items directly on the surface.
9. Avoid placing your wooden furniture in direct sunlight, strong heat or
humid environment as it may aect the colour of the wood.
Care and cleaning instructions
1. Wipe spills and stains immediately.
2. Clean using a soft, dry cotton cloth.
3. If a deeper clean is required, a cotton cloth moistened with lukewarm
water can be used. Wipe the surface in the direction of the wood.
Afterwards wipe the surface with a dry cotton cloth to remove any
moisture that may damage the wood.
4. Avoid applying strong cleaning agents as it may damage the surface.
5. If the tambour sliding door is slow or dicult to open or close, apply
a small amount of hard candle wax inside the door grooves.