. Safety Notes
1. After receiving the Novopro LED Scrim, please open the packing carton to check the
goods and all other accessories are consistent with the packing list and in good condition. If
anything is found to be missing or damaged by transportation, please contact your place of
purchase as soon as possible.
2. This LED Scrim is for indoor use only!
3. It should not be exposed to rain, moisture, water or any other liquids.
4. The Scrim should be kept away from sources of heat or ignition to protect against fire.
5. This item should be protected from shock, vibration, impact and dust in order to keep it in
good working condition. Also please take great care when folding/unfolding cloth so that no
undue strain is put on the internal wiring, this will ensure trouble free operation for the life of
the cloth.
6. LED Scrim controller must be installed in a location with adequate ventilation to prevent
overheating.
7. The connection, installation, operation and maintenance of LED Scrim should only be
attempted by competent person.
8. Make sure no ventilation slots in the controller are blocked.
9. Avoid walking on or pulling the LED Scrim with excessive force to keep the internal
cables & connections in order.
10. Electrical connection must be carried out by qualified person.
11. Make sure the voltage and frequency of the power supply match the power
requirements of this device.
12. Always connect this product to a grounded circuit to avoid the risk of electrocution.
13. Do not connect LED Scrim to any dimmer circuitry.
14. Make sure the power cord is not crimped or damaged.
15. Never pull out the plug by pulling or tugging on the cord.
16. Never operate this product with the covers removed.
17. Always disconnect this product from the power supply before cleaning or attempting
any maintenance work.
18. Never suspend this product on any moving apparatus and always use the
hanging/mounting straps supplied.
19. The maximum ambient temperature is 40℃, Do not operate this product at higher
temperatures.
20. In case of any serious operation problem, stop using this product immediately and
contact your place of purchase.
Warning:
Any damages caused by the non-observance of this manual or any unauthorised
modification to this product will not be covered by the warranty.
Important:
Please observe the wiring colour coding of your country if connecting this product to the
mains with anything other than the mains cable provided
