Novopro Scrim Black User manual

Scrim Black for DJS2
INSTRUCTION MANUAL
Manual version 1.0
This user manual will help you assemble and operate this product safely and
quickly, so please spend a few minutes to read through the enclosed information.
Due to continuous product development, please check for the latest version of this product manual at:
www.novopro.co.uk
Designed and engineered in the UK and manufactured in China for Novopro Ltd.
Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers.
At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.

2
Thank you for purchasing this Novopro product.
Unpacking and safety Please unpack your new product carefully. Your product should reach you in perfect condition. Please check
that no damage has occurred during transit. If any damage is found or there are any missing pieces from the packing list, please
contact the retailer you purchased it from immediately. Do not attempt to assemble it unless you have everything listed below.
Packing list
A: 4 x DJS2 scrim black
B: Instruction manual (this document)
Assembly
Step 1(diagram A)
Ensure that you have the four scrims to hand and enough space around you so that you can add them to your Novopro DJS2 DJ screen
(sold separately).
To attach the scrims to each panel. Begin by attaching the top and bottom left corners of the first scrim to the left hand side of the frame
with the hook-and-loop fastener strips facing each other. When you have secured the first two corners, continue by stretching the scrim
across to the right hand side of the frame. Keep the scrim taught as you attach it to the frame. The hook-and-loop strips will stick to each
other and secure the scrim. Smooth out any wrinkles and repeat for each panel.
Your Novopro DJS2 with black scrim is now ready for use. By angling the four frames, the unit will be sufficiently stable but due diligence
and appropriate safety measures must be implemented and adhered to within public areas. It is the user’s responsibility to use the
product in a safe manner and within current Health and Safety Guidelines.
Maintenance
The scrims can be wiped down with a damp cloth or hand/machine washed at a maximum of 30 degrees. They are treated with a
fire retardant finish, which must be re-applied after washing. A suitable fire retardant spray/treatment is available online or from
your local supplier.
DJS 2 specifications (sold separately)
Height: 1200mm / 47.24 inches
Width (each panel): 700mm / 27.55 inches
Frame material: aluminium
Surface and colour: white powder coated
White fire-retardant scrim: wash by hand in cold water and lay flat to dry
Weight: 5.4Kg / 11lb 14 oz
Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.