Noyce Joyce Nixie Clock User manual

NIXIE
ALARM

LIST OF COMPONENTS
1x Front Mask
1x Back Board
1x Adapter + Cable
2x Large Rib
2x Side Cover 2x Sidewall
4x Rib
1x Top Board
1x Bottom Board1x Middle Board
1x Main Board with Nixie Tubes

The alarm clock face is composed of Nixie Tubes. Each tube contains a wire-mesh anode and multiple
cathodes shaped like numbers. The tube is lled with a gas, usually neon. Connecting cathode to
electric voltage ignites an electric discharge which will surround the number with orange glow.
NIXIE ALARM CLOCK
Keep out of reach of children.
Assemble carefully,
some components are fragile.
Follow the assembly
instructions thoroughly.
Prevent both individual parts
and the assembled alarm
from falling.
Avoid contact with water.
Do not use metal objects
such as tweezers, etc. to
assemble.
Not intended for repeated
assembling.
This device is electrostatic
sensitive.
ESD

The parts were designed to t together as tightly as possible so that their connection would
therefore be as strong as possible. For this reason, more assembly force is required.

Tip: Rest both parts on a solid surface and push against it.

Make sure the battery is inserted.
The battery needs to be replaced once in approximately 5 to 6 years.
Insert the battery into the holder with the +
symbol facing away from the main board!
CR1216

Make sure that the back board is oriented correctly in relation to the rest of the alarm clock.

Thanks to the precision of the joints, more assembly force is required to achieve
a rm connection. We recomend using a solid surface and pushing against it.

If you are unable to pass the sidewall though, check if the ribs are snapped in completely.

Connect the pin headers to appropriate pin sockets according to the pictures on
the next double page.

Make sure the the top and the bottom board are placed in correct position.

Connect the USB cable. You will nd it inside the packaging.
USB

Connect the power cord to the power supply.

4. ALARM SETTING
To set an alarm press the button.
As soon as the rst pair of digits starts ashing, you can start
setting the alarm time using the and buttons.
Press the button to procede to the setting of minutes.
Conrm the nal time setting by pressing .
5.
To stop the alarm use the touch button on the top of the
alarm clock or use the switch at the back of the alarm.
ALARM CANCELING
To cancel the alarm function use the switch at the back.
TIME FORMAT
To switch between 12 and 24 hour format, hold down the
button until you hear a beep.
FIRMWARE UPDATE
To update the rmware, disconnect the USB, press the
button, and connect the UBS back again. Or use the app.
1. TIME SETTING
Use the buttons on the back to set the time and the alarm.
2.
Hold down the button. As soon as the rst group of digits
starts ashing, you can start setting the time.
3.
Use the and buttons to set the correct time in 24-hour
format. Set the time in this order: hours - minutes
Press the button to procede to the setting of minutes.
Conrm the nal time setting by pressing .
or

www.noycejoyce.com