NunoErin Sparkle Table Top 61.5" SPTT-61 ADA Instruction sheet

©2020
Sparkle Table Top 61.5”
PAGE 1

Sparkle Table Top 61.5”
CUSTOMER SERVICE /ASSISTANCE
+1 601.994.0023 [e-mail]
[e-mail] www.nunoerin.com
Installation Guidelines
Product Specifications
TOOLS TOUSEPARTS NOT INCLUDEDPARTS INCLUDED
1
TableLeg
MATERIAL SPECIFICATIONS:
Table Top: Translucent white solid surface
Table Side Finish: Opaque white solid surface
Electronic Packaging: Full Spectrum LED Lights, Capacitive
Touch Sensors, 20 animated interactive light programs
Sohware: Plug and play setup, all software preloaded
Weight: ~124 lbs.
MODEL: SPTT-61 ADA
SPTT-61 NADA
61.5” x 28.5” x3”
DIMENSIONS:
1
PhilipsHead
Screwdriver
1
Socket and Wrench
appropriate for
floor bolt size
4
.25-20 x .75 long,
Phillips Pan Head
screws
4
.3125 inside dia.
FlatWashers
4
Floor Bolts
appropriate for
floor surface type
ELECTRICAL/POWER:
Power Cord: NEMA plug style 5-15,
length 6’, AMPS 13 cord with 0.3125”
cord type SJT,3PCS
Power supply /AC Input :
Voltage Range: 90 ~264 VAC
(Universal AC Input /Full Range)
PAGE 2
©2020
AC Current: 1.1A / 115 VAC _ 0.7A / 230VAC
Frequency Range: 47 ~63 Hz

Sparkle Table Top 61.5”
1Prepare the site by installing
agrounded power outlet inside
one of thelegs.
NOTE: Remove the electrical ac-
cess panel on the leg.
Power will run up through the
leg with the electrical access
panel and connect to the base
of the table.
NOTE: The leg without an
electrical access panel will be
used for the leg without power.
2Secure each leg to the floor with
4 anchor bolts corresponding to
the holes in the base of each leg.
NOTE: 4 b3-1/4” Kwik Bolt3
bolts are recommended.
Slide legs through anchor bolts
and into place on floor.
grounded power outlet
elevated at least
6” from the floor
PAGE 3
©2020

Sparkle Table Top 61.5”
3Remove metal cover plate on
base of table top that matches
leg with electrical access panel.
Atable top power receptacle
will be revealed.
NOTE: Receptacles are installed
on both sides of the tabletop.
For safety, remove only one
cover plate.
4Plug one end of the power
cord securely into the
receptacle on the base of
the table top.
Ensure that the cord is fully
threaded through the leg
and firmly plugged into the
grounded power outletinside
the leg.
NOTE: replace the electrical
access panel removed in Step 1.
table top
power receptacle
table top
power receptacle
PAGE 4
©2020

Sparkle Table Top 61.5”
5To attach table top to table legs,
remove screws and washers
from the base of the table top.
6Align the table legs with the
mounting holes on the base
of the table top and secure
with screws andwashers.
remove washers and screws
from table top and
align with tab holes on legs
PAGE 5
©2020

Sparkle Table Top 61.5”
Note: No NunoErin representative, dealer or salesperson is authorized to assist in
the measurment of installation of NunoErin Products in the field. Customers are
advised to obtain the proper measurement, specifications and sizes only from their
builder, designer or engineer. Accordingly, any assistance provided in the fieldby
a NunoErin representative should not be relied upon and will not be binding upon
NunoErin in any form or fashion. NunoErin shall not be liable in any form of mea-
sures from incorrect measurements or specifications made in the field,irrespective of
whether aNunoErin representative was involved in the process.
©2020
PAGE 6
533 Commerce Street
Jackson, MS 39201 USA
O: 01.601.944.0023 Customer Service: [e-mail]
Top and Sides
Spray the top and side surfaces with a multi surface cleaner and wipe using a soft
cloth. Recommended cleaners include Fantastik household cleaner and Formula 409
household cleaner.
Disinfecting
Sani-Cloth® AF3 Germicidal Disposable Wipes, Steris Coverage Plus® and Clorox
Healthcare® Hydrogen Peroxide Cleaner Disinfectant Wipes are recommended.
DO NOT use use strong acidic or solvent based cleaners, such as methylchloride
or acetone.
Scratches
Superficial scratches on the top surface only can be removed by rubbing a wet
#7448 ScotchBrite pad in a circular motion until the scratches disappear, followed
by spraying with amulti-surface cleaner and wiping dry with asoft cloth. Never use
abrasive cleaners on the laminate sides, which will dull or damage the finish.
CLEANING AND MAINTENANCE
Product Image
Here
Side View
NOTE: IMPROPER CONNECTION OFEQUIPMENT GROUNDING CONDUCTOR
CAN RESULT IN ARISK OF ELECTRIC SHOCK. Check with aqualified electrician or
serviceman if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product, or if it will not fit the outlet. Have a
proper outlet installed by aqualified electrician.
INSTALLATION OF NUNOERIN PRODUCTS. Installation of all NunoErin product is
solely the responsibility of the builder, contractor, interior desiner and decor
vendor, or the Customer. NunoErin has no control over the installer or the
installation process and will not be responsible for any installations that are not
done in a good, work- manlike manner, that do not follow NunoErin installation
recommendations noted in the Product Literature or that fail to conform to
electrical codes. NunoErin assumes no responsibility for such compliance. Consult
you local building code officials for specific requirements.
ELECTRICAL
This product is for use on anominal Universal Power 110 -220 VAC circuit and must
be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.