Nurture& The Glider User manual

Note: Do not allow children to play or use this electronically
operated furniture unsupervised. Due to the risk of injury, make sure
that there is nothing underneath the footrest when it is returned to
the closed position. When not in use, leave the chair in an upright and
closed position. Keep hands and feet clear of mechanism and only the
occupant should operate the mechanism to avoid injury.
Questions? Give us a shout at [email protected]
CoverBack
Questions? Give us a shout at [email protected]
INSTRUCTION MANUAL
The Glider
USB Port
Reset Glider to
Starting Position
Adjust Footrest
& Recline Back
Adjust
Headrest

1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
Qty.No.
A
B
C
D
E
F
Description
Seat
Back
Power Cord
Connector #1
Connector #2
Transformer
Sketch
Parts List
Congratulations on your Nurture& purchase - we are so excited
for you to join the #madeforsharedmoments community, and
enjoy THE GLIDER with your growing family.
Hi. Hello!
Slide the back (part B) onto the seat (part A)
aligning the two brackets.
Guide the bracket on the back into the
sleeve on the chair, and press the top of the
back (part B) down firmly (you’ll hear a
noise!).
Connect the connectors (part C and D)
between chair back and seat.
Before you assemble: check for damaged or missing parts (email
[email protected] for help), use the carton as a working
surface to prevent product damage before assembly, and gather
all parts prior to assembly.
Plug in the two components of the power
cord (part E and F), and connect to the
back of the chair. Plug into a wall outlet.
Enjoy the Glider - use the buttons to adjust
the headrest, recline and sit the chair up, and
the USB port to power your USB device!
E
F
B
C D
A
To avoid injury, use care when assembling
Adult supervision required when used by children
Assemble and use on level surface
Maximum load: 150 kg /330 lbs. Exceeding this weight may damage
product and cause potential injury
Inside
Questions? Give us a shout at [email protected]