NUUO TD-5702 User manual

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
1
Thermal Camera User Manual
TD-5702
User Manual

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
2
Thermal Camera User Manual
Contents
1 Windows System Setting (parameter optimization)
1.1 Set User Account Level (UAC)
1.2 Set up Power Management
2 IVS-II Installation of Software (First-Time installation)
3 IVS-II Activated of the License
4 IVS-II The Operation Interface of the main program system
5 The System Setting
5.1 Optional Screen splitting method
5.2 System Setting
5.3 Add IP-camera
5.4 Alert Linkage Setting
6 Thermal Image and Alert Setting
6.1 Thermal Image Setting
6.2 Spot/Box Setting
6.3 Thermal Alert and Related Setting
6.4 Temperature Image
7 Parameter Configuration

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
3
Thermal Camera User Manual
1. Windows System Setting
1.1 Change User Account Control (UAC)
Search “UAC” from the Windows

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
4
Thermal Camera User Manual
Adjust to “Never Notify” on User Account Control Setting, then click ”OK”. After that, it will pop-up the message to
allow this app to make changes, please click “YES”.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
5
Thermal Camera User Manual
1.2 Setting Power Management
On the Windows Key, click [Power Options]
Set the sleep start time to [Never]

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
6
Thermal Camera User Manual
2. NuThermal Software Installation (First-Time Installation)
Right click and Run as administrator in NuThermal Software “NuThermal_Setup_V96.00.001 ”
((Note: The software is mainly based on the shipping version)
Please follow the steps, four components will be added in the first-time Installation: NET Framework 2.0, Visual
C++ 2008/2013/2015. And check the agreement of license terms and conditions, then press “Install” it.
After completing the V C++ Installation, click OK to process the installation of IVS-II. If it still has the error
message appear you install all of V C++, please ignore it and go back to the last screen, complete the steps
directly.
Please follow the steps to click “Next” until the end of the installation.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
7
Thermal Camera User Manual
Right-click on the shortcut to generate IVS-II on the desktop and select the content. Click on Compatibility to run
this program as the system administrator.
Check and apply, then click OK.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
8
Thermal Camera User Manual
3. IVS-II License Activate
After completing the installation of IVS-II, the system will pop up a message window automatically, asking to user
to activate the IVS-II authorization code.
(Note: The serial number SN is subject to actual shipment)
To activate the software will require the access privilege to be granted. There are "Mini ASP Web Server", "DVR
Server" and "Upgrade Server.ex_" respectively, please click Allow Access to confirm by the requirements.
(Note: Please add these three executable files to the exception, if there are anti-virus software)
During the initial installation and reinstallation, the software will ask if you want to keep the previous settings.
For the initial installation, the user can select “NO” to clear the sample configuration.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
9
Thermal Camera User Manual
Firstly, create a Thermal license after entering the software. If you skip this step, it won’t be able to start the
thermal imaging lens.
A) Right click on the monitoring screen and click the IVS-II License authorization code to register.
B) Press [Add]

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
10
Thermal Camera User Manual
4. VS-II The Operation Interface of the main program system
4.1 The System Interface
The screen resolution cannot be lower than 1280x720, the best resolution is 1920x1080, click the desktop shortcut
icon to automatically load and display the operation interface as follows:
Number
Function
Details
1
Drop Out
Re-login / leave system / lock system
2
Shrink Window Key
Reduce the IVS-II main system interface to the toolbar
3
Date/Time/Disk Space
Display system time, date and the usage percentage of disk
space

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
11
Thermal Camera User Manual
4
Camera List
Sort USB / IP cameras alphabetically by camera name
5
Setup
Enter the system setting function interface
6
Playback
Play ordinary video files / play linked video files / play 360-
degree camera video files
7
Preview split mode
4/6/9/16/25/36/49/64 Split mode selection and switching
8
Full screen/custom split
screen
/
Make the preview pane full screen, or execute the option to
customize the split screen in the system setting function.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
12
Thermal Camera User Manual
5. The System Setting
5.1 Optional screen splitting method
Click to select the page split mode tab:
Create a new screen split method: select the number of shots and press [Create] to generate the corresponding
number of panes, use the mouse to drag and drop the size and position of the panes according to the needs, then
click [Save] to enter the name to complete the screen The establishment of split mode, up to 7 groups
Delete the screen division method: select the name of the division method to be deleted, click [Delete] to complete
(Note: When there are more than one set of self-selected screen division methods, the user must choose from the
options on the main system operation interface)

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
13
Thermal Camera User Manual
5.2 The System Setting
Click the System Settings tab：
Auto run with windows start-up:The system will automatically load and execute when the host restarts
Show on taskbar tary icon when mini: to avoid the system being shut down accidentally
Enable Windows OS: When disable the function, the host will automatically restart when user log out the
system. It is a limitation for user who operating the system alone.
Auto Reboot Windows: Set up the Begin Time and Elapse Time to restart the host at a scheduled time
Preview tour(second): The camera can be switched in sequence by selecting split window type at the fixed
time
Make Water-Mark for record file: To prevent the video data from being tampered after exporting.
Show Snap Shot picture on preview-window: To preview the photo content in the lower right corner of the
screen. It’s beneficial to user confirm the photo is valid directly.
Auto sync with internet-time-server: To set the synchronization server other than the host system time
Draw Rect on Preview-Window when motion-detection alert: The red frame indicates the detected
dynamic area, so that the user can immediately get attention to the location of the event
Stop Record when video-source lost: Save system resources
Enable watch-dog: Set the enable time
Auto Lock UI: Set the lock time to prevent users forgetting lock the system from being invaded
Pop text-dialog on alarm: Strengthen the prompt alert event
Snapshot Mode: Optional JPEG / BMP format
Windows setting: Click [Set system time] to modify the host system time
Network Card: Select network card and Static IP address
Save All Configurations to file: All configurations in IVS-II settings can be exported

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
14
Thermal Camera User Manual
Read All Configuration from file: Import configuration file into IVS-II
5.3 Add IP camera/Thermal camera
Click the IP-Camera
Click [Start Scan], it will search cameras automatically if the camera is supported by ONVIF / SHANY protocol.
Moreover, it can manually assign the IP address, please chose SHANY-V2 for the Manufacturer Model.
The default IP of TD-5702 is 192.168.1.168. The Account and password are admin / 9999

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
15
Thermal Camera User Manual
Select the manually added / automatically searched IPCAM that you want to manage, and click to add it to the
management list. The system will ask you to log in to the camera account password for camera connection
management. After the completion, you can see the list of cameras successfully connected and logged in on the
main interface of the software. (See Form 4-1 Form No. 5)
5.4 Alert Linkage Setting
Click Alert Linkage Page：
If you expect to receive an email when an alarm be triggered, please configure the SMTP Server on this page and
test the email delivery correctly.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
16
Thermal Camera User Manual
5.10.1 Add the Alert Linkage
Click [Add], the "Edit Linkage Action" setting interface appears
Step 1: Select the Alarm Type: Thermal Temperature + Thermal event (the blank space)
Step 2: Select the alarm source and the specify Thermal camera
Step 3: Select the linkage action after triggering the alarm. It is recommended to use the Wave or Zoom Preview
Step 4: The related alarm screen and select the general image camera. The alarm will be triggered when the
temperature exceeds the warning value.
Step 5: Click [Save] to keep the parameters

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
17
Thermal Camera User Manual
6. Thermal Image
6.1 Thermal Image Setting

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
18
Thermal Camera User Manual
Thermal image setting:
Display color system: can be divided into three color systems
Rainbow
Grayscale
Ironblack

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
19
Thermal Camera User Manual
Temperature range display: represents the different color scale (depending on the vary color system)
Selecting dynamic adjustment will be changed due to the moving of the camera. As shown below:
Select the fixed range and set up the minimum to maximum temperature value.

© 2020 NUUO Inc. All rights reserved.
www.nuuo.com
20
Thermal Camera User Manual
Select the detection area: Set by left mouse button, clear by right mouse button.
means detection area