Cam Finder
The IP Cam Finder automatically discovers and displays NUVICO
5MP IP Cameras on your network.So please download the
"IP Cam Finder " from http://www.nuvico.com
1. Connect the Network Camera to the network and power up.
2. Start IP Cam Finder utility by clicking IP Cam Finder, the
main window will be displayed.
2-1. Change to ALL Device
2-2. Click the refresh button on the Tool Bar
After a short while, any network devices connected to the network
will be displayed in the list.
2-3. Assign new IP address.
If it is your first time logging in, IE will ask you to install the Active X File.
Click the Install & Run then follow the instructions. And click on “Internet Options”, pop-up screen.
In the "Security", click the button Pop-up screen.
In the ActiveX controls and plug-in to set every option, as follows
Note：Select "Enable"
Note：Select "Enable"
After completing the settings, click ,then pop up dialog box.
Click to exit the dialog box. And then click to exit
IE settings.
2
3
2
3
1
1
