Nuvoton NuTiny-SDK- NUC472 User manual

NuTiny-SDK- NUC472 User
Manual
NuTiny-SDK- NUC472 User Manual
for NuMicro™NUC472 Series
MCU 별도구매 가능합니다.
LogicTech Inc
서울시구로구구로동615-3
STX W타워813-1호
Tel : [phone]
Fax : [phone]
Sales & Tech : [e-mail]
커스터마이징및신규개발문의환영합니다.
July 02, 2014 Rev. 1.01

NuTiny-SDK-NUC472 User Manual
Table of Contents
1 Overview........................................................................................... 3
2 Introduction to NuTiny-SDK-NUC472..................................................... 3
2.1 NuTiny-SDK-NUC472 Jumper Description ......................................................5
2.2 Pin Assignment for Extended Connectors.......................................................7
2.3 NuTiny-SDK-NUC472 PCB Placement ..........................................................11
3 Starting to Use NuTiny-SDK-NUC472 on the Keil μVision® IDE................ 12
3.1 Downloading and Installing Keil μVision® IDE Software .................................12
3.2 Downloading and Installing Nuvoton Nu-Link Driver......................................12
3.3 Hardware Setup.......................................................................................12
3.4 Example Program..................................................................................... 13
4 Starting to Use NuTiny-SDK-NUC472 on the IAR Embedded Workbench .. 14
4.1 Downloading and Installing IAR Embedded Workbench Software ....................14
4.2 Downloading and Installing Nuvoton Nu-Link Driver......................................14
4.3 Hardware Setup.......................................................................................14
4.4 Example Program..................................................................................... 15
5 NuTiny-EVB-NUC472 Schematics ........................................................ 16
5.1 NuTiny-EVB-NUC472 Schematic .................................................................16
5.2 Nu-Link-Me Schematic ..............................................................................23
6 Downloading NuMicro™ Related Files from Nuvoton Website .................. 24
6.1 Downloading NuMicro™ Keil μVision® IDE Driver ..........................................24
6.2 Downloading NuMicro™ IAR EWARM Driver .................................................27
6.3 Downloading NuMicro™NUC472 Series BSP Software Library ......................... 30
7 Revision History ............................................................................... 32
July 02, 2014 2 of 32 Rev. 1.01

NuTiny-SDK-NUC472 User Manual
July 02, 2014
3 of 32
Rev. 1.01
1 Overview
The NuTiny-SDK-NUC472 is a specific development tool for NuMicro™ NUC472 series.
User can use NuTiny-SDK-NUC472 to develop and verify the application program
easily. The NuTiny-SDK-NUC472 includes two parts: NuTiny-EVB-NUC472 and Nu-
Link-Me. The NuTiny-EVB-NUC472 is the evaluation board and Nu-Link-Me is its
Debug Adaptor. Therefore, user does not need other additional ICE or debug
equipment.
2 Introduction to NuTiny-SDK-NUC472
The NuTiny-SDK-NUC472 uses the NUC472HI8AE as the target microcontroller. Figure
2-1 shows the NuTiny-SDK-NUC472 for NUC472 series, in which the left portion is
called NuTiny-EVB-NUC472 and the right portion is called Nu-Link-Me.
The NuTiny-EVB-NUC472 is similar to other development boards. User can use it to
develop and verify applications to emulate the real behavior. The on-board chip covers
NUC472 series features. The NuTiny-EVB-NUC472 can be a real system controller to
design user’s target systems.
The Nu-Link-Me is a Debug Adaptor, which connects your PC's USB port to your target
system (via Serial Wired Debug port) and allows you to program and debug embedded
programs on the target hardware. To use the Nu-Link-Me Debug Adaptor with IAR or
Keil, please refer to the “Nuvoton NuMicro™ IAR ICE Driver User Manual or “Nuvoton
NuMicro™ Keil ICE Driver User Manual” for details. The two documents will be stored
in the local hard disk when each driver is installed.

NuTiny-SDK-NUC472 User Manual
July 02, 2014
4 of 32
Rev. 1.01
VDD5V
(JP4)
LQFP-176pin
Extended Connector
(J2x, J3x, x = A ~ C)
VDD5V
(JP14)
I/OLED
(PB.10)
USB OTG
Connector
(CON2)
Ethernet
PHY
(CON1)
TargetChip
ICEController
USBConnector
(ICEJ1)
LQFP-176pin
ICEController
GND
(JP6) Extended Connector
(J1x, J4x, x = A ~ C)
ResetKey
(SW1)
VCC ： 3.3Vor 5V*
(JP1)
Figure 2-1 NuTiny-SDK-NUC472 (Black PCB Board)
* NOTE: Make sure the VCC (JP1) is shorted on VCC33 (default), and don’t change it
to protect all the Ethernet 3.3V devices in the NuTiny-EVB-NUC472 when debugging
this target NUC472 system via this Nu-Link-Me board.

NuTiny-SDK-NUC472 User Manual
July 02, 2014
5 of 32
Rev. 1.01
2.1 NuTiny-SDK-NUC472JumperDescription
2.1.1 Power Settings
ICEJ1: USB port in Nu-Link-Me
CON2: USB port in NuTiny-EVB-NUC472
JP4/JP14: VDD5V voltage connector in NuTiny-EVB-NUC472
POWER
Mode
ICEJ1
USB Port (Mini)
CON2
USB Port (Micro)
JP4/JP14
VDD5V
MCU
Voltage
Comment
Mode 1
Connected to PC
X
DC 5V
Output
DC 3.3 V
ICEJ1 (from PC) supplies the
power.
Mode 2
X
Connect to PC
(USB port is device)
DC 5V
Output
DC 3.3 V
CON2 (from PC) supplies the
power when TP10 is wired to
JP4 or JP14.
Mode 3
X
Connect to PC
(USB port is host)
DC 5V
Input
DC 3.3V
JP4 or JP14 supplies the
power.
X: Unused.
2.1.2 Debug Connectors
JP11: The connector in the target board (NuTiny-EVB-NUC472) for connecting
with Nuvoton ICE adaptor (Nu-Link, Nu-Link-Pro or Nu-Link-Me)
ICEJP2: The connector in the ICE adaptor (Nu-Link-Me) for connecting with a
target board (e.g. NuTiny-EVB-NUC472)
2.1.3 USB Connectors
ICEJ1: Mini USB connector in Nu-Link-Me connected to a PC USB port
2.1.4 USB OTG Host/Device Connector
CON2: Micro USB connector in NuTiny-EVB-NUC472 for application use
2.1.5 Extended Connectors
J1x, J2x, J3x and J4x (x = A ~ C) : Show all chip pins in NuTiny-EVB-NUC472
2.1.6 Reset Button
SW1: Reset button in NuTiny-EVB-NUC472. Press this key to reset the target chip
NUC472HI8AE.

NuTiny-SDK-NUC472 User Manual
July 02, 2014
6 of 32
Rev. 1.01
2.1.7 Power Connectors
JP3: VCC33 connector in NuTiny-EVB-NUC472 to supply the 3.3V voltage input to
target board
JP10: An option to select whether the 3.3V voltage input supplied by the ICE
bridge (default)
VBAT: The VBAT connector in NuTiny-EVB-NUC472 to supply an extra battery
power. The default is shorted with VCC33.
JP4/JP14: VDD5V connector in NuTiny-EVB-NUC472 to supply 5V voltage input
from an extra power supplier.
JP6: GND connector in NuTiny-EVB-NUC472
2.1.8 10/100 Mbps Fast Ethernet PHY
CON1: Ethernet connector in NuTiny-EVB-NUC472 for application use.

NuTiny-SDK-NUC472 User Manual
July 02, 2014
7 of 32
Rev. 1.01
2.2 Pin Assignment for Extended Connectors
The NuTiny-EVB-NUC472 provides the NUC472HI8AE target chip on board and the
extended connectors J1x, J2x, J3x, and J4x (x = A ~ C) for LQFP 176-pin.
No
Pin Name
No
Pin Name
1
PE.12/ADC1_4/ACMP1_P3/ACMP2_P2/
EBI_ncs1/HS
21
PD.0/SPI1_MISO0/SC4_CLK/SD1_DAT2/
CAP_DATA3/EBI_A4/INT3/HS
2
PE.13/ADC1_5/ACMP2_P1/EBI_nCS2/HS
22
PD.1/SPI1_CLK/TM0_CNT_OUT/SD1_DAT1/
CAP_DATA2/EBI_A5/HS
3
PE.14/ADC1_6/ACMP2_P0/EBI_nCS3/HS
23
PD.2/STADC/I2C3_SCL/SD1_DAT0/CAP_DATA1/
EBI_A6/HS
4
PE.15/ADC1_7/ACMP2_N
24
PH.11/UART3_RXD
5
PF.9/OPA0_IN+/PWM0_0/HS
25
PH.12/UART3_TXD
6
PF.10/OPA0_IN-/PWM0_1/HS
26
PH.13/UART3_RTS
7
PF.11/OPA0_O/UART1_RTS
27
PH.14/UART3_CTS
8
PF.12/OPA1_IN+/UART1_CTS
28
PD.3/SC5_CLK/I2C3_SDA/ACMP2_O/SD0_CDn/
CAP_DATA0/EBI_A7/HS
9
PF.13/OPA1_IN-/UART1_TXD
29
PD.4/SC5_CD/UART3_RXD/ACMP1_O/
CAP_SCLK/EBI_A8/HS
10
PF.14/OPA1_O/UART1_RXD
30
PD.5/SC5_RST/UART3_TXD/CAP_VSYNC/
EBI_A9/HS
11
VSS
31
PD.6/SC5_PWR/UART3_RTS/SD0_CMD/
CAP_HSYNC/EBI_A10/HS
12
VDD
32
PD.7/SC5_DAT/UART3_CTS/SD0_CLK/
CAP_PIXCLK/EBI_A11/HS
13
PF.15/UART0_RTS
33
PH.15/SC5_CLK
14
PG.0/UART0_CTS/INT6
34
PI.0/SC5_RST
15
PG.1/UART0_RXD
35
PI.1/SC5_PWR
16
PG.2/UART0_TXD
36
PI.2/SC5_DAT
17
PC.12/SPI1_SS0/SC4_CD/SD1_CDn/CAP_DATA7/
EBI_A0/HS
37
PG.13/XT1_IN
18
PC.13/SPI1_MOSI1/SC4_RST/SD1_CMD/
CAP_DATA6/EBI_A1/HS
38
PG.12/XT1_OUT
19
PC.14/SPI1_MISO1/SC4_PWR/TM3_EXT/
SD1_CLK/CAP_DATA5/EBI_A2/HS
39
nRESET
20
PC.15/SPI1_MOSI0/SC4_DAT/SD1_DAT3/
CAP_DATA4/EBI_A3/HS
40
LDO_CAP

NuTiny-SDK-NUC472 User Manual
July 02, 2014
8 of 32
Rev. 1.01
41
VSS
64
PG.4/PS2_DAT/I2S1_DI/SC1_PWR
42
VDD
65
PG.5/I2S1_BCLK/SC1_DAT
43
PG.10/ICE_CLK
66
PG.6/I2S1_LRCK/SC1_CLK
44
PG.11/ICE_DAT
67
VDD
45
PG.15/X32K_IN/I2C1_SCL
68
VSS
46
PG.14/X32K_OUT/I2C1_SDA
69
PA.7/SC0_CLK/SPI3_SS0/PWM1_3/EPWM0_5/
EBI_A17/HS
47
VBAT
70
PA.8/SC0_RST/SPI3_CLK/PWM1_2/EPWM0_4/
EBI_A18/HS
48
PA.0/TAMPER0/SC0_CD/CAN1_RXD/INT0
71
PA.9/SC0_PWR/SPI3_MISO0/PWM1_1/EPWM0_3
/EBI_A19/HS
49
PA.1/TAMPER1/SC5_CD/CAN1_TXD/EBI_A22
72
PA.10/SC0_DAT/SPI3_MOSI0/PWM1_0/
EPWM0_2/EBI_A20/HS
50
PI.3/SPI3_SS0/HS
73
PA.11/UART0_RTS/SPI3_MISO1/PWM0_5/
EPWM0_1/EBI_AD0/HS
51
PI.4/SPI3_CLK/HS
74
PA.12/UART0_CTS/SPI3_MOSI1/PWM0_4/
EPWM0_0/EBI_AD1/HS
52
PI.5/SPI3_MISO0/HS
75
PA.13/UART0_RXD/SC3_DAT/PWM1_4/EBI_AD2/
HS
53
PI.6/SPI3_MOSI0/HS
76
PA.14/UART0_TXD/SC3_CLK/PWM1_5/EBI_AD3/
HS
54
PD.8/SPI3_MISO1/I2C0_SCL/HS
77
PI.9/I2C4_SCL
55
PD.9/SPI3_MOSI1/I2C0_SDA/HS
78
PI.10
56
PA.2/SC2_DAT/SPI3_MISO0/I2S0_MCLK/
BRAKE11/CAP_SFIELD/EBI_A12/HS
79
PD.10/SC3_DAT/I2C4_SCL
57
PA.3/SC2_CLK/SPI3_MOSI0/I2S0_DO/BRAKE10/
EBI_A13/HS
80
PD.11/SC3_RST/TM3_CNT_OUT
58
PA.4/SC2_PWR/SPI3_CLK/I2S0_DI/QEI1_Z/
EBI_A14/ECAP1_IC2/HS
81
PD.12/SC3_CLK/I2C4_SDA
59
PA.5/SC2_RST/SPI3_SS0/I2S0_BCLK/PWM0_0/
QEI1_B/EBI_A15/ECAP1_IC1/HS
82
PA.15/SC3_PWR/UART2_RTS/I2C0_SCL/
EBI_A21/HS
60
PA.6/SC2_CD/I2S0_LRCK/PWM0_1/QEI1_A/
CAN1_TXD/EBI_A16/ECAP1_IC0/HS
83
PC.9/STADC/UART2_CTS/SC3_RST/I2C0_SDA/
CAP_DATA1/I2C3_SCL/EBI_A22/SD1_DAT0/
EBI_A6/HS
61
PI.7/I2C2_SCL/SPI3_MISO1/HS
84
PC.10/SC3_CD/UART2_RXD/PWM0_2/EBI_A23/
EBI_AD2/HS
62
PI.8/I2C2_SDA/SPI3_MOSI1/HS
85
PC.11/UART2_TXD/PWM0_3/EBI_A24/EBI_AD3/
HS
63
PG.3/PS2_CLK/I2S1_DO/SC1_RST
86
LDO_CAP

NuTiny-SDK-NUC472 User Manual
July 02, 2014
9 of 32
Rev. 1.01
87
VSS
110
PF.1/SPI2_MOSI1/HS
88
VDD
111
VDD
89
PD.13/SPI1_SS0/UART5_CTS/ECAP0_IC2/HS
112
VSS
90
PD.14/SPI1_CLK/UART5_RTS/ECAP0_IC1/HS
113
PB.2/UART1_RXD/SPI2_SS0/USB1_D-/
EBI_AD4/HS
91
PD.15/SPI1_MISO0/UART5_TXD/ECAP0_IC0/HS
114
PB.3/UART1_TXD/SPI2_CLK/USB1_D+/EBI_AD5/
HS
92
PF.0/SPI1_MOSI0/UART5_RXD/INT5/HS
115
PB.4/UART1_RTS/SPI2_MISO0/UART4_RXD/
TM0_CNT_OUT/EBI_AD6/HS
93
VRES
116
PB.5/UART1_CTS/SPI2_MOSI0/UART4_TXD/
EBI_AD7/HS
94
VBUS
117
PB.6/I2C2_SCL/BRAKE01/UART4_RTS/PWM1_4/
EPWM1_0/EBI_AD8/HS
95
USB_VDD33_CAP
118
PB.7/I2C2_SDA/BRAKE00/UART4_CTS/PWM1_5/
EPWM1_1/EBI_AD9/HS
96
VSSA
119
PB.8/UART5_CTS/EPWM1_2/
EBI_AD10/HS
97
USB0_D-
120
PB.9/UART5_RTS/EPWM1_3/
EBI_AD11/HS
98
USB0_D+
121
PB.10/UART5_TXD/EPWM1_4/
EBI_AD12/HS
99
USB0_OTG_ID
122
PB.11/UART5_RXD/EPWM1_5/
EBI_AD13/HS
100
PB.0/USB0_VBUS_ST/I2C4_SCL/INT1
123
PH.0/I2C1_SCL/UART4_RXD/CAN1_RXD/INT7
101
PB.1/USB0_VBUS_EN/I2C4_SDA/TM1_CNT_OUT
124
PH.1/UART4_TXD/I2C1_SDA/CAN1_TXD
102
PG.7/SPI2_MISO0/I2S1_MCLK/SC1_CD/
SC3_RST/HS
125
PB.12/UART4_RTS/SPI2_MISO1/CAN0_RXD/
EMAC_MII_MDC/EBI_AD14/HS
103
PG.8/SPI2_MOSI0/I2S1_DO/UART4_RTS/
SC3_DAT/HS
126
PB.13/UART4_CTS/SPI2_MOSI1/CAN0_TXD/
EMAC_MII_MDIO/EBI_AD15/HS
104
PG.9/SPI2_CLK/I2S1_DI/UART4_CTS/SC3_CLK/
HS
127
PB.14/I2S1_MCLK/SC1_RST/BRAKE01/
EMAC_MII_MDC/HS
105
PI.11/SPI2_SS0/I2S1_BCLK/I2C4_SCL/SC3_PWR/
HS
128
PB.15/I2S1_DO/SC1_DAT/BRAKE00/
EMAC_MII_MDIO/HS
106
PI.12/SPI2_MISO1/I2S1_LRCK/I2C4_SDA/
SC3_CD
129
VDD
107
PI.13
130
VSS
108
PI.14
131
LDO_CAP
109
PI.15
132
PC.0/I2S1_DI/SC1_DAT/UART4_RXD/
EMAC_REFCLK/EBI_MCLK/INT2/HS

NuTiny-SDK-NUC472 User Manual
July 02, 2014
10 of 32
Rev. 1.01
133
PC.1/I2S1_BCLK/SC1_CLK/UART4_TXD/
TM3_CNT_OUT/EMAC_MII_RXERR/EBI_AD13/HS
155
PH.7/SPI2_MISO0/HS
134
PC.2/I2S1_LRCK/SC1_PWR/UART4_RTS/
SPI0_SS0/EMAC_MII_RXDV/EBI_AD12/HS
156
PH.8/SPI2_MOSI0/HS
135
PC.3/I2S1_MCLK/SC1_CD/UART4_CTS/
SPI0_MISO1/QEI0_Z/EMAC_MII_RXD1/EBI_AD11/
ECAP0_IC2/HS
157
PH.9/SPI2_MISO1/HS
136
PC.4/I2S1_DO/SC1_RST/SPI0_MOSI1QEI0_B/
EMAC_MII_RXD0/EBI_AD10/ECAP0_IC1/HS
158
PH.10/SPI2_MOSI1/HS
137
PC.5/CLKO/QEI0_A/EMAC_MII_RXCLK/
EBI_MCLK/ECAP0_IC0/HS
159
LDO_CAP
138
PC.6/TM2_EXT/SPI0_MISO0/TM2_CNT_OUT/
EMAC_MII_TXD0/EBI_AD9/HS
160
VSS
139
PC.7/TM1_EXT/SPI0_MOSI0/EMAC_MII_TXD1/
EBI_AD8/HS
161
VDD
140
PC.8/TM0_EXT/SPI0_CLK/EMAC_MII_TXEN/HS
162
PE.0/ADC0_0/INT4
141
PF.2/SPI3_SS0/SD0_DAT3/EMAC_MII_RXD3/HS
163
PE.1/ADC0_1/TM2_CNT_OUT
142
PF.3/SPI3_CLK/SD0_DAT2/EMAC_MII_RXD2/HS
164
PE.2/ADC0_2/ACMP0_O/SPI0_MISO0/HS
143
PF.4/SPI3_MISO0/SD0_DAT1/EMAC_MII_COL0/
HS
165
PE.3/ADC0_3/ACMP0_P3/SPI0_MOSI0/HS
144
PF.5/SPI3_MOSI0/SD0_DAT0/EMAC_MII_CRS/HS
166
PE.4/ADC0_4/ACMP0_P2/SPI0_SS0/HS
145
VSS
167
PE.5/ADC0_5/ACMP0_P1/SPI0_CLK/SD0_CDn/HS
146
VDD
168
PE.6/ADC0_6/ACMP0_P0/SPI0_MISO0/
SD0_CMD/EBI_nWR/HS
147
PF.6/UART2_RXD/SD0_CDn/EMAC_MII_TXCLK/
HS
169
PE.7/ADC0_7/ACMP0_N/SPI0_MOSI0/SD0_CLK/
EBI_nRD/HS
148
PF.7/UART2_TXD/SD0_CMD/EMAC_MII_TXD3/
HS
170
AVSS
149
PF.8/UART2_RTS/SD0_CLK/EMAC_MII_TXD2/HS
171
Vref
150
PH.2/UART2_CTS
172
AVDD
151
PH.3/I2C3_SCL
173
PE.8/ADC1_0/ADC0_8/ACMP1_N/
TM1_CNT_OUT/SD0_DAT3/EBI_ALE/HS
152
PH.4/I2C3_SDA
174
PE.9/ADC1_1/ADC0_9/ACMP1_P0/SD0_DAT2/
EBI_nWRH/HS
153
PH.5/SPI2_SS0/HS
175
PE.10/ADC1_2/ADC0_10/ACMP1_P1/
SPI0_MISO1/SD0_DAT1/EBI_nWRL/HS
154
PH.6/SPI2_CLK/HS
176
PE.11/ADC1_3/ADC0_11/ACMP1_P2/
SPI0_MOSI1/SD0_DAT0/ACMP2_P3/EBI_nCS0/
HS
Table 2-1 NUC472HI8AE LQFP 176-pin Assignment for Extended Connectors