Nvt phybridge Ec-link+ User manual

EC-Link+

EC-LINK+ Installation Details

1. Remove the EC-Link+ from its packaging.

2. Remove all legacy equipment from the Coax cable infrastructure.

NOTE: In order to avoid damage to endpoints, it is important that non-IP devices are

not connected when you connect the EC-Link+.

3. Connect the Network Infrastructure cable from the CLEER24, EC10 or

EC-Base to the EC-Link+ (LRE side).

4. Using CAT5 or higher category cable, connect the endpoint to EC-Link+

(Endpoint side).

NOTE: EC-Link+ can be used with the CLEER24, EC10 or EC-Base

Product Details (NV-ECLK-PLS)

• Paired with CLEER24, EC10, or EC-Base

• Up to 50W PoE with EC-Base or locally powered

• Up to 30W PoE with CLEER24 or EC10

EC-Base

To Switch To LRE

Installation Details

1. Remove the EC-Base from its packaging.

2. Remove all legacy equipment from the Coax cable infrastructure.

NOTE: In order to avoid damage to endpoints, it is important that non-IP devices are

not connected when you connect the EC-Base.

3. Connect EC-Base (Switch side) to downlink port on switch.

4. Connect the Network Infrastructure cable from the EC-Base (LRE side) to

EC-Link+ or EC4 (LRE side).

5. Using CAT5 or higher category cable, connect the endpoint to the EC-Link+

or EC4 (Endpoint side).

NOTE: EC-Base can be used with EC-Link+ or EC4

Product Details (NV-ECLK-BSE)

• Paired with EC-Link+, EC-Link, or EC4

• Up to 50W PoE

NOTE: Please see page 2 for important safety instructions

• Local power option

• IEEE compliant

To LRE To Endpoint

The EC-Base and EC-Link+ adapters enable extended Ethernet and PoE reach

beyond traditional distances using Coax infrastucture. The EC-Link+, when

connected to the EC-Base unit via Coax can deliver 10/100Mbps (symmetrical, full

duplex) and PoE++ (up to 50W) with up to 4,000ft (1,219m) reach. The EC offering

is designed specifically to enable easy deployment over Coax for reaches beyond

that of standard Ethernet eliminating the costs and disruption associated with IDF

closet requirements.

EC-Base

ActivityLink

37-55VDC In

Link/Speed

Green:

100Mbps

Orange:

10Mbps

To Switch

Activity

Link

To LRE

Toggle switch allows

option between

100Mbps (Green) or

10Mbps (Orange)

37-55VDC In

• Local power option

• IEEE compliant

• PoE on 4 pairs

EC Adapter Applications

10/100Mbps (symmetrical, full duplex) and PoE++ (up to 50W) with up to 4,000ft (1,219m) reach

PoE over Coax

To Application

To Switch

Local Power Option

CLEER 24-Port or

EC10 10-Port Switch

EC-Link

EC-Link +

EC-Link

EC-Link +

EC-Base

EC-Base EC4

Local Power Option

QUICK INSTALL GUIDE - EC ADAPTERS

EC-Link+

Long Reach PoE over Coax

EC-Base

Long Reach PoE over Coax

Model Number EC-Link+ EC-Base

Part Number NV-ECLK-PLS NV-ECLK-BSE

Dimensions 10.09cm x 5.03cm x 2.57cm (LxWxH);

3.97” x 1.98” x 1.01” (LxWxH)

10.09cm x 5.03cm x 2.57cm (LxWxH);

3.97” x 1.98” x 1.01” (LxWxH)

Weight 108g (3.81oz.) 108g (3.81oz.)

Interface: Network

Infrastructure side (CLEER) 1 BNC port: Coax cable (RG59, RG6, RG11) 1 BNC port: Coax cable (RG59, RG6, RG11)

Interface: IEEE Side (IP

Device)

1 RJ45 port; adapter is IEEE 802.3af/at compliant and will negotiate power

requirements with IP end device.

(For General/PoE Switch)

1 RJ45 port: supports negotiation with IEEE 802.3 af/at switches

Power Supply

Maximum 50W (If locally powered and 30W if power provided from switch)

delivered on 4 pairs. PoE from standard PoE switch, or external power supply; maximum 50W if

locally powered.

DC IN

(Barrel Connector)

Optional (sold separately)

48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated

only)

NOTE 1: Local power supply used must have its output isolated from Earth

potential.

NOTE 2: If voltage of local power supply is lower than the power voltage

provided from the PoE switch, then power on the PoE switch should be

turned off.

Optional (sold separately)

48V – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated

only)

NOTE 1: Local power supply used must have its output isolated from Earth

potential.

NOTE 2: If voltage of local power supply is lower than the power voltage

provided from the PoE switch, then power on the PoE switch should be

turned off.

Power Consumption 1.1W 1W

Operating Temperature

-58°F to +158°F (-50°C to +70°C)

Tests conducted against international safety standard at maximum ambient

temperatures of 60ºC at 30W and 55ºC at 50W

-58°F to +158°F (-50°C to +70°C)

Tests conducted against international safety standard at maximum ambient

temperatures of 60ºC at 30W and 55ºC at 50W

Mean Time Before Failure

(MTBF) 20+ years 20+ years

Humidity 10% to 95% (non-condensing) at 35° C 10% to 95% (non-condensing) at 35° C

Note the following:

All of the above instructions provide basic installation information necessary for the proper and safe functioning of this equipment. Persons installing or

maintaining this product must read all of the safety instructions and the parts of system grounding, which are applicable to the system being maintained.

Only trained, qualified service personnel shall install or maintain this product.

• Keep these instructions with the equipment.

• Do not attempt to install or service this equipment unless you are skilled in the installation and maintenance of electronic telecommunications equipment and have

successfully completed specific training for this equipment.

WARNING: FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN IMPROPER EQUIPMENT OPERATION AND/OR RISK OF ELECTRICAL SHOCK.

WARNING: ANY CONNECTION TO AN OUTSIDE PLANT LEAD, AN OFF-PREMISE APPLICATION, OR ANY OTHER EXPOSED PLANT APPLICATION MAY

RESULT IN A FIRE OR SHOCK HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE.

Compliance and Environmental Information

All the compliance and environmental information is available on our website www.nvtphybridge.com

Technical Specifications

EC-Link+ and EC-Base

CAUTION, Hot surface

ATTENTION, Surface chaude

VORSICHT, Heiße Oberfläche

PRECAUCIÓN, Superficie caliente

VAROITUS, Kuuma pinta

VOORZICHTIGHEID, Heet oppervlakte

VARNING, Varm yta

ADVARSEL, Varm overade

ΠΡΟΣΟΧΗ, Καυτή επιφάνεια

ATTENZIONE, Superficie calda

CUIDADO, Superfície quente

ATTENZJONI, Wiċċ sħun

ETTEVAATUST, Kuum pind

VIGYÁZAT, Forró felület

PREVIDNOST, Vroča površina

POZOR, Horký povrch

ATSARGIAI, Karštas paviršius

UZMANĪBU, Karstā virsma

POZOR, Horúci povrch

VARÚÐ, Heitt yfirborð

PRZESTROGA, Gorąca powierzchnia

FORSIKTIG, Varm overflate

PRUDENȚĂ,Suprafata fierbinte

ВНИМАНИЕ, Гореща повърхност

Safety Warnings and Precautions

Refer to the CLEER24 or EC10 Quick Install Guides under “Safety Warnings” for the EC adapters

Reportez-vous aux Quick Install Guides CLEER24 ou EC10 sous “Safety Warnings” pour les adaptateurs EC

Beachten Sie die CLEER24- oder EC10- Quick Install Guides unter “Safety Warnings” für die EC-Adapter

Consulte las Quick Install Guides CLEER24 o EC10 bajo “Safety Warnings” para los adaptadores EC

Katso CLEER24- tai EC10 Quick Install Guides EC-sovittimien “Safety Warnings” alla

Raadpleeg de CLEER24 of EC10 Quick Install Guides onder “Safety Warnings” voor de EC-adapter

Se CLEER24 eller EC10 Quick Install Guides under “Safety Warnings” för EC-adaptrarna

Se CLEER24 eller EC10 Quick Install Guides under "Safety Warnings" for EC-adaptere

Ανατρέξτε στους οδηγούς CLEER24 ήEC10 Quick Install Guides στην ενότητα “Safety Warnings” για τους προσαρμογείς EC

Fare riferimento alla sezione CLEER24 o EC10 Quick Install Guides sotto “Safety Warnings” per gli adattatori EC

Consulte o CLEER24 ou EC10 Quick Install Guides em “Safety Warnings” para os adaptadores EC

Irreferi għall-CLEER24 jew EC10 Quick Install Guides taħt “Safety Warnings” għall-adapters EC

Vaadake CLEER24 või EC10 Quick Install Guides alusel “Safety Warnings” EC adapterid

A EC adapterek “Safety Warnings” című részében olvassa el a CLEER24 vagy a EC10 Quick Install Guides című részt

Nanašajo na CLEER24 ali EC10 Quick Install Guides pod "Safety Warnings" za EC adapterji

Další informace naleznete v příručkách CLEER24 nebo EC10 Quick Install Guides v části "Safety Warnings" pro adaptéry EC

Kreiptis į CLEER24 ar EC10 Quick Install Guides pagal "Safety Warnings" Už EC adapteriai

Skatiet CLEER24 vai EC10 Quick Install Guides zem "Safety Warnings,” lai EC adapteri

Pozrite si CLEER24 alebo EC10 Quick Install Guides v časti "Safety Warnings" pre adaptéry EC

Sjá CLEER24 eða EC10 Quick Install Guides undir "Safety Warnings " fyrir EC-millistykki

Zobacz CLEER24 lub EC10 Quick Install Guides w sekcji "Safety Warnings" w przypadku adapterów EC

Se CLEER24 eller EC10 Quick Install Guides under "Safety Warnings" for EC-adaptere

Consultați ghidurile CLEER24 sau EC10 Quick Install Guides din secțiunea "Safety Warnings" pentru adaptoarele EC

Обърнете се към CLEER24 или EC10 Quick Install Guides в"Safety Warnings" за адаптери EC

QUICK INSTALL GUIDE

The NVT Phybridge Technical Support Group is available to assist you with product installation, configuration, monitoring and troubleshooting procedures. Should you