OBaby Lincoln Changing Unit User manual

Instructions
PLEASE READ THESE INSTRUCTIONS
CAREFULLY BEFORE USING THIS PRODUCT
IMPORTANT
KEEP FOR FUTURE REFERENCE

www.obaby.co.uk
Thank you for choosing Obaby. This changing unit conforms to BSEN 12221:2008 To
ensure that your changing unit is used in accordance with these instructions, please read
them fully .
Your child's safety may be affected if you do not follow these instructions.
WARNING: Do not leave the child unattended.
WARNING: The changing unit must be used on a level and stable surface.
WARNING: Never move the changing unit with the child on it.
WARNING: Be aware of the risk of open fire and other sources of heat, such as electric
bar fires, gas fires, etc. in the vicinity of the changing unit.
WARNING: Do not use the changing unit if any part is broken, or missing and use only
spare parts approved by the manufacturer.
We recommend you use a changing mat with maximum dimensions of 76cm x 45cm,
placing the mat evenly inside the changing unit.
All assembly fittings should be tightened properly and care should be taken to
ensure that no screws are loose, as a child could trap parts of the body, or clothing
(e.g.ribbons,drawstrings, necklaces) this could lead to strangulation.
Regularly check that all fittings and components of the dresser are fully tightened
and in working order.
Wood is a natural material, the colour will darken with age.
ROUTINE CARE & MAINTENANCE
- For cleaning, use only a mild detergent and warm water.
- DO NOT USE BLEACH.
- DO NOT USE any abrasive substances.
- Take care when handling or moving furniture, careless handling can damage wooden
furniture.
Due to constant updating and improvements, some components may occasionally differ
slightly from the images shown in these instructions. We reserve the rights to change the
specifications of any products without prior notice. If you need any assistance please
contact your Obaby retailer from whom you purchased your product, who will take
appropriate action.
Safety Warnings2

www.obaby.co.uk
Parts Check List 3
x18
x2
x6 x6
P15 P16 P17
x32
x18

www.obaby.co.uk
Step 1
Step 2
Assembly4
5

www.obaby.co.uk
Step 3
Step 4
Assembly 5
7
8

Step 5
Step 6
www.obaby.co.uk
Assembly6
11
9

Step 7
Step 8
www.obaby.co.uk
Assembly 7
10

Step 9
Step 10
www.obaby.co.uk
P13
6
Assembly8
2
2

Step 11
Step 12
www.obaby.co.uk
Assembly 9
4
3

Step 13
www.obaby.co.uk
Assembly9
7
Step 14
To prevent tipping, use wall safety pack to attach back of changing unit to the wall.