Ocean Matrix OMX-HDMI3X1-V2 User manual

Installation Requirements
1. Source: HDMI video source
2. Display: Display with HDMI port
3. Cable: HDMI cable able to support 4Kx2K
INSTALLATION & SPECIFICATIONS
OMX-HDMI3X1-V2
Switcher Routes 3 HMDI Sources to One HDMI Display
Installation
1. Connect the HDMI video source output ports to the
switcher input HDMI ports
2. Connect the HDMI display to the switcher output port
3. Connect the power supply and turn the power on
4. Select a video source using the remote control, Selection
button, or through the RS232 port
Specifications
Input/Output 3 HDMI Inputs, 1 HDMI Output
Compatibility DVI1.0, HDMI1.4, HDMI2.0
HDCP1.4, HDCP2.2
Frequency Range 25MHz-600MHz
Video Form
12 Bit Full HD
3D Video
4Kx2K@ 30/60HZ UHD
TMDS Signal 0.5-1.5Vp-p(TMDS)
DDC Signal 5Vp-p(TTL)
Audio
Standard
DSD (Direct Stream Digital)
HD(HBR)
HDMI Resolution 480i/480p/756i/756p/720p/1080i/1080p/
4Kx2K@ 24/25/30/60Hz
RS232 Serial Port Baud Rate: 9600bps
Power Supply 5VDC/1A
Power Consumption 5W
Dimensions (LxWxH) 3.8x2.3x0.66in
Weight 3.2oz
Signal Link LED Select Input
IR Window
Power LED
123
Selecon
Includes
1. 5VDC/1A Power
Supply
2. Remote Control
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
DC 5V
INPUT
RS232
OUTPUT
HDMI HDMI 1HDMI 2HDMI 3
HDMI Output HDMI Input RS232 Power Input
Video Source
Display
HDMI 1HDMI 2
INPUT
RS232
Video Source
Video Source
OUTPUT
HDMI 3 DC 5V
HDMI
Power Adapter
RS232 Serial Port
1. HDMI 2 Input: port1R
2. HDMI 3 Input: port2R
3. Power ON: poweronR
4. Power OFF: poweroffR
5. HDMI 1 Input: port0R
Features
 Routes 3 HDMI sources to 1 HDMI display
 Supports HDMI resolution up to 4K x 2K@60HZ & HDMI 3D
 Input signal can be switched by remote control
 Supports bandwidth up to 18Gpbs
Remote Control
1. Use the numbered buttons
to select source device
2. Use the < and > buttons to
choose channel

SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust.
Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct
sunlight exposure or extreme changes of temperature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is provided. Any enclosure open-
ings must not be blocked or covered as they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not
use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through
openings as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
9. Do not attempt to open or service this unit yourself as opening or removing covers may expose you to
dangerous voltage and other hazards.
10.There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized
dealer, or an authorized repair service company.
Troubleshooting
No image output
 Ensure power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
 Check that the HDMI cables are securely connected.
 Check that the display/TV has been set to the proper channel.
 For PC connections via HDMI, set output mode to mirror or extend.
Display is unstable
 Check all connections.
 Connect the HDMI source directly to the display device to ensure there is a signal output.
Change the signal source if necessary.
 Use only high-quality HDMI 1.4 and HDMI 2.0 cable for transmitting 4K×2K UHD signal.
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com