OE electrics INSTR1303 User manual
CUTOUT FOR MULTIPLE QIKPAC CONNECTING SHOES
CUTOUT FOR SINGLE QIKPAC CONNECTING SHOE
(9.39”)
238.50
(1.84”)
46.70
(2.40”)
61.00
(1.06”)
26.81
(9.39”)
238.50
(1.38”)
35.00
REQUIRED
CABLE
CLEARANCE
(1.63”)
+
-
0.02
0.00
41.50
+
-
0.50
0.00
(9.31”)
236.50
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
(1.63”)
+
-
0.02
0.00
41.50
+
-
0.50
0.00
(1.63”)
+
-
0.02
0.00
41.50
+
-
0.50
0.00
(0.81”)
20.50
MIN
(9.31”)
236.50
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
Power
Output
COMBINED OUTPUT
RATING 144W MAX
COMBINED OUTPUT
RATING 144W MAX
*SIT STAND MECHANISM CAN BE CONNECTED TO EITHER END OF THE QIKDOC,
BUT THE SECOND OUTPUT AT THE SAME END OF THE QIKDOC SHOULD NOT
THEN BE USED (OTHERWISE BATTERY OVERLOAD AND SHUTDOWN MAY OCCUR)
Power
Output
Power
Output
Power
Output
Power
Input
QIKPAC M4F (Docking)Connecting Shoe
Panel installation instructions
INSTR1303
www.oeelectrics.com
UK -
Cutout Dimensions
1
2
4
Single Connecting Shoe
Align Connecting Shoe with
cutout and snap into place 3
Connect GST08 interconnecting cable to
appropriate connector on underside of
connecting shoe with writing on the cable
facing up
Power inputs and outputs
Cables should
slot into place
easily. Do not
force
Rear
View
NOTE: M4F Connecting Shoe is used for Appliance Powering
QIKPAC M4F (Docking)Connecting Shoe
Panel installation instructions
INSTR1303
www.oeelectrics.com
UK -
Connect GST08 cable to auxilary
components*
7
Cable tie GST08 cable into place
Slide cable tie through slot Fold cable tie over cable(s) Tighten cable tie & remove excess
5Cable retention clips shown in blue
6
*Other accessories available please see ANIMATE components
Place QIKPAC battery onto Connecting
Shoe
8
Other OE electrics Rack & Stand manuals
