fully Jarvis User manual

Jarvis single monitor arm
Assembly instructions
For assembly assistance,
contact us at 888-508-3725
or email [e-mail]

2
Cautions
Jarvis is a registered trademark of Fully, Inc.
All rights reserved.
Read this entire instruction manual before
you start installation and assembly. If you
have any questions regarding any of the
instructions or warnings, please contact Fully.
Use with monitors heavier than 19.8 lbs may
result in instability causing possible injury.
Mounts must be attached as specified in
assembly instructions. Improper installation
may result in damage or serious personal
injury.
Make sure that the supporting surface will
safely support the combined weight of
the Monitor Desk Mount and all attached
hardware and components.
Use the monitor mounting screws provided
and DO NOT OVER TIGHTEN them.
This product contains small items that could
be a choking hazard if swallowed. Keep those
items away from children.
This product is intended for indoor use only.
Using this product outdoors could lead to
product failure and personal injury.
Important
Ensure that you have received all parts
according to the component checklist prior to
installation. If any parts are missing or faulty,
contact Fully.
Maintenance
Check that the bracket is secure and safe to
use at regular intervals. We recommend at
least every three months.
Tools
4mm Hex Wrench
(included)
6mm Hex Wrench
(included)
Phillips Screwdriver
(not included)

3
Parts
B
C
D
E
F
Gx5
I
J
Nx4
AH
K
Lx4
Mx4
O

4
Assembly
1A
A
C
D
G
K
x5
Clamp Mount

5
2A
E
Clamp Mount

6
1B Grommet Mount
F
Gx3
K
A
H

7
2B Grommet Mount
I
J
O

8
Nx4
3
B
Lx4
Mx4

9
4

10
5

11
6

version 282022.a
Everything you need
to find your work flow