OEM BB-11 User manual

110 Box
110 box and Box Buddy with
alignment tool in place
OEM Systems Company, Inc.
740 Freeport Blvd., #106 Sparks, NV 89431-6168
775 355-0405 Fax [phone]
www.oemsystems.com [email protected]
Product materials & specifications are subject to change / improvement
Box Buddy low voltage mounting rings are
designed for positioning low voltage devices
next to 110 VAC electrical boxes with stan-
dard NEC spacing so that the combined 110
and low voltage device(s) may be covered
with one multi-gang coverplate for an
elegant appearance. The Box Buddy uses a
patent pending pull-off alignment tool that
makes combined installation and alignment
of 110 VAC and low voltage devices simple
and quick.
Box Buddy low voltage mounting rings
feature conduit flanges off-set by 5/8" which
enable un-obtrusive use of conduit connec-
tors (see photo bottom of page on reverse).
Box Buddy
BB-11
BB-12
BB-21
BB-22
Pull-off alignment tool
Add 1 Low Voltage device to a 1 gang 110 VAC Box
Add 2 Low Voltage devices to a 2 gang 110 VAC Box
Add 1 Low Voltage device to a 2 gang 110 VAC Box
Add 2 Low Voltage devices to a 1 gang 110 VAC Box
Low Voltage Mounting Rings

MR-8
8 Gang 1" & 2" conduit openings
MR-421
4 Gang 1" & 2" conduit openings
MR-31 (shown)
3 Gang 1" conduit openings
MR-32
3 Gang 2" conduit openings
MR-21
2 Gang 1" conduit openings
MR-22 (shown)
2 Gang 2" conduit openings
MR-21/22
MR-31/32
MR-421
MR-8
MR-CVR
MR-1
OEM Systems Company, Inc.
740 Freeport Blvd., #106 Sparks, NV 89431-6168
775 355-0405 Fax [phone]
www.oemsystems.com [email protected]
Product materials & specifications are subject to change / improvement
Use of conduit connector will not
interfere with device mounting.
Pro-Wire low voltage mounting rings
are ideal for mounting a wide variety
of low voltage devices. They feature
conduit flanges off-set by 5/8" which
enable unobtrusive use of conduit
connectors.
MR-1
Combination Speaker Locator
& Single Gang Mounting Ring
MR-CVR
Round Metal Cover Plate for MR-1
Low Voltage Mounting Rings