Officine Gullo FLS6EMU Instruction manual

INSTRUCTIONS
FOR INSTALLATION AND USE
FLS6EMU - FRS6EMU - FLRS6EMU
ELECTRIC GRIDDLE FOR RESIDENTIAL AND PROFESSIONAL USE

Ofcine Gullo2
TABLE OF CONTENTS
WARNINGS AND SAFETY INSTRUCTIONS .............................................................................4
INSTALLATION MANUAL
ELECTRICAL SCHEME ..........................................................................................................8
INSTALLATION INSTRUCTIONS..............................................................................................9
BEFORE YOU BEGIN ...........................................................................................................9
ELECTRICAL INSTALLATION...................................................................................................9
TECHNICAL ELECTRICAL DATA TABLE ......................................................................................9
USER MANUAL
INSTRUCTIONS FOR USE .....................................................................................................11
LOADING...........................................................................................................................11
SPECIAL INDICATIONS.........................................................................................................11
CLEANING AND MAINTENANCE.........................................................................................12
WHAT TO DO IN THE EVENT OF A BREAKDOWN ..................................................................13
3
Ofcine Gullo

TABLE OF CONTENTS
WARNINGS AND SAFETY INSTRUCTIONS .............................................................................4
INSTALLATION MANUAL
ELECTRICAL SCHEME ..........................................................................................................8
INSTALLATION INSTRUCTIONS..............................................................................................9
BEFORE YOU BEGIN ...........................................................................................................9
ELECTRICAL INSTALLATION...................................................................................................9
TECHNICAL ELECTRICAL DATA TABLE ......................................................................................9
USER MANUAL
INSTRUCTIONS FOR USE .....................................................................................................11
LOADING...........................................................................................................................11
SPECIAL INDICATIONS.........................................................................................................11
CLEANING AND MAINTENANCE.........................................................................................12
WHAT TO DO IN THE EVENT OF A BREAKDOWN ..................................................................13
3
Ofcine Gullo

WARNINGS AND SAFETY INSTRUCTIONS
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions
and situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining,
or operating the appliance.
ALWAYS contact the manufacturer about problems or conditions you do not understand.
Recognize Safety Symbols, Words, Labels
Read and follow all instructions before using this appliance to prevent the potential risk of re, electric shock,
personal injury, or damage to the appliance as a result of improper usage of the appliance. Use appliance only for
its intended purpose as described in this manual.
To ensure proper and safe operation: appliance must be properly installed and grounded by a qualied technician.
DO NOT attempt to adjust, repair, service, or replace any part of your appliance unless it is specically recommended
in this manual. All other servicing should be referred to a qualied servicer. Have the installer show you how to shut
off the appliance in an emergency.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
!DANGER
Hazards or unsafe practices
which WILL result in death or
severe personal injury.
!WARNING
Hazards or unsafe practices
which COULD result in death or
severe personal injury.
!CAUTION
Hazards or unsafe practices
which COULD result in minor
personal injury.
All safety messages will identify
the hazard, tell you how to
reduce the chance of injury, and
tell you what can happen if the
instructions are not followed.
Ofcine Gullo4
!WARNING
WARNING – TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING:
a. SMOTHER FLAMES with a close-tting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO
PREVENT BURNS. If the ames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN – You may be burned.
c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
d. Use an extinguisher ONLY if: i) You know you have a Class ABC extinguisher, and you already know how to
operate it. ii) The re is small and contained in the area where it started. iii) The re department is being called.
iv) You can ght the re with your back to an exit.
!WARNING
a) WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may
ignite. Heat oils slowly on low or medium settings.
b. Always turn hood ON when cooking at high heat or when ambeing food (i.e. Crepes, Suzette, Cherries
Jubilee, Peppercorn Beef Flambe’).
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or lter.
d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
!WARNING
To avoid risk of property damage, personal injury or death; follow information in this manual exactly to prevent a
re or explosion. DO NOT store or use gasoline or other ammable vapors and liquids in the vicinity of this or
any appliance.
!WARNING
NEVER use appliance as a space heater to heat or warm a room to prevent potential hazard to the user and
damage to the appliance. Also, DO NOT use the rangetop or oven as a storage area for food or cooking utensils.
!WARNING
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are OFF and the appliance is COOL before cleaning. Failure to do so can result in burns
or electrical shock.
!WARNING
TIPPING HAZARD
To reduce the risk of the appliance tipping, some appliances are equipped with an anti-tip bracket(s).
The appliance must be secured by a properly installed anti-tip bracket(s) if provided.
5
Ofcine Gullo

!WARNING
WARNING – TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING:
a. SMOTHER FLAMES with a close-tting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO
PREVENT BURNS. If the ames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN – You may be burned.
c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
d. Use an extinguisher ONLY if: i) You know you have a Class ABC extinguisher, and you already know how to
operate it. ii) The re is small and contained in the area where it started. iii) The re department is being called.
iv) You can ght the re with your back to an exit.
!WARNING
a) WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may
ignite. Heat oils slowly on low or medium settings.
b. Always turn hood ON when cooking at high heat or when ambeing food (i.e. Crepes, Suzette, Cherries
Jubilee, Peppercorn Beef Flambe’).
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or lter.
d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
!WARNING
To avoid risk of property damage, personal injury or death; follow information in this manual exactly to prevent a
re or explosion. DO NOT store or use gasoline or other ammable vapors and liquids in the vicinity of this or
any appliance.
!WARNING
NEVER use appliance as a space heater to heat or warm a room to prevent potential hazard to the user and
damage to the appliance. Also, DO NOT use the rangetop or oven as a storage area for food or cooking utensils.
!WARNING
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are OFF and the appliance is COOL before cleaning. Failure to do so can result in burns
or electrical shock.
!WARNING
TIPPING HAZARD
To reduce the risk of the appliance tipping, some appliances are equipped with an anti-tip bracket(s).
The appliance must be secured by a properly installed anti-tip bracket(s) if provided.
5
Ofcine Gullo

Technical safety
• Installation, repair and maintenance work should be performed by an authorized service technician in accordance
with national and local safety regulations and the provided installation instructions.
• Maintenance by the user: never repair or replace any part of the appliance unless the instructions specically
recommend doing so. Service work may only be performed by a qualied technician.
• A damaged appliance can be dangerous. Always check for visible signs of damage. Never use a damaged
appliance.
• The electrical safety of the range can only be guaranteed when it is properly grounded. Compliance with this
essential safety requirement is absolutely mandatory. The manufacturer declines all responsibility for damage caused
by a improperly grounded electrical system. If in any doubt, please have the building's wiring system inspected by
a qualied electrician.
• To avoid damaging the range, make sure that the connection data (voltage and frequency) on the data plate
correspond to the building's power supply before connecting the appliance, and that the electrical system and
sockets can handle the appliance’s maximum power consumption as shown on the tag. When in doubt, consult a
qualied electrician.
• The use of any electric appliance implies the observance of some basic rules. More specically:
- Avoid the use of extension cords and, if necessary, take all precautions;
- Do not pull the power cord to disconnect the plug from the power socket;
- Do not allow children or untrained persons to use the appliance.
• During installation, maintenance and repair work, the range must be completely disconnected from the electricity
supply.
• Risk of electric shock! If the appliance is defective, immediately turn the appliance off and discontinue use.
Disconnect the power supply and contact the assistance.
• If the range is installed behind a cabinet door, do not close the door while the appliance is in operation. Heat and
moisture can build up behind the closed door and cause damage to the range and to the surrounding cabinets and
ooring. Do not close the door until the appliance has completely cooled down.
• When not in use for extended periods, switch off the general power supply.
• Before performing maintenance work, disconnect the appliance by pulling the plug out of the power socket or
turning off the main switch.
• In case of failure or malfunction, turn the appliance off and do not attempt to carry out any repairs, which must be
done exclusively by an authorized service center.
• NEVER pick up or move a aming pan.
• GREASE. Grease is ammable and should be handled carefully. DO NOT use water on grease res. Flaming
grease can be extinguished with baking soda or, if available, a multipurpose dry chemical or foam type extinguisher.
Let fat cool before attempting to handle it. DO NOT allow grease to collect around the oven or in vents. Wipe up
spillovers immediately.
• If the appliance is covered, there is a risk that the material of the cover will ignite, explode or melt if the range is
still hot or if turned on inadvertently. Never cover the appliance with a board, cloth or protective sheet.
• When using an electrical appliance, e.g. a hand mixer, near the cooktop, make sure that the power cable does
not come into contact with the hot appliance. The cable's insulation could become damaged.
• Cookware made of plastic or aluminum foil will melt at high temperatures. Do not use any plastic or aluminum
foil cookware.
• PREPARED FOOD WARNING: Follow food manufacturer’s instructions. If a plastic frozen food container and/or
its cover distorts, warps, or is otherwise damaged during cooking, immediately discard the food and its container.
The food could be contaminated.
• Do not store ammable materials on or near the appliance. Keep the appliance area clean and free of combustible
materials, gasoline and other ammable vapors and liquids. A check before each use to determine that no hazardous
materials are in te area is recommended.
• The appliance gets hot when in use and remains hot for some time after being turned off. Do not touch the
appliance if there is a possibility that it could still be hot. You can burn yourself.
• If the appliance is accidentally turned on or is still hot, metal objects on the appliance can heat up. Other items
may melt or catch re. Do not place unused items on it for storage!
Ofcine Gullo6
• If the appliance has not been used for a long period of time, be sure to thoroughly clean it and have it inspected
by an authorized technician before using it again.
• Ask your installer to show you the location of the circuit breaker panel in your apartment or home. Be sure that you
know how and where to disconnect your appliance.
Child Safety
• NEVER leave children alone or unsupervised near the appliance when it is in use or is still hot.
• NEVER allow children to sit or stand on any part of the appliance as they could be injured or burned.
• DO NOT store items of interest to children over the unit. Children climbing to reach items could be seriously injured.
• Children must be taught that the appliance and utensils in it can be hot. Let hot utensils cool in a safe place, out
of reach of small children.
Children should be taught that an appliance is not a toy. Children should not be allowed to play with controls or
other parts of the appliance.
Cleaning Safety
• Turn off all controls and wait for appliance parts to cool before touching or cleaning them. DO NOT touch the
burner grates or surrounding areas until they have had sufcient time to cool.
• Clean appliance with caution. Use care to avoid steam burns if a wet sponge or cloth is used to wipe spills on a
hot surface. Some cleaners can produce noxious fumes if applied to a hot surface.
Important notice regarding pet birds:
NEVER keep pet birds in the kitchen or in rooms where the fumes from the kitchen could reach. Birds have a very
sensitive respiratory system.
Fumes released due to overheated cooking oil, fat, margarine and overheated non-stick cookware may be equally
harmful.
Before using your range
All products are wiped clean with solvents at the factory to remove any visible signs of dirt, oil, and grease which
may have remained from the manufacturing process. There may be some burn off and odors on rst use of the
appliance—this is normal.
7
Ofcine Gullo

• If the appliance has not been used for a long period of time, be sure to thoroughly clean it and have it inspected
by an authorized technician before using it again.
• Ask your installer to show you the location of the circuit breaker panel in your apartment or home. Be sure that you
know how and where to disconnect your appliance.
Child Safety
• NEVER leave children alone or unsupervised near the appliance when it is in use or is still hot.
• NEVER allow children to sit or stand on any part of the appliance as they could be injured or burned.
• DO NOT store items of interest to children over the unit. Children climbing to reach items could be seriously injured.
• Children must be taught that the appliance and utensils in it can be hot. Let hot utensils cool in a safe place, out
of reach of small children.
Children should be taught that an appliance is not a toy. Children should not be allowed to play with controls or
other parts of the appliance.
Cleaning Safety
• Turn off all controls and wait for appliance parts to cool before touching or cleaning them. DO NOT touch the
burner grates or surrounding areas until they have had sufcient time to cool.
• Clean appliance with caution. Use care to avoid steam burns if a wet sponge or cloth is used to wipe spills on a
hot surface. Some cleaners can produce noxious fumes if applied to a hot surface.
Important notice regarding pet birds:
NEVER keep pet birds in the kitchen or in rooms where the fumes from the kitchen could reach. Birds have a very
sensitive respiratory system.
Fumes released due to overheated cooking oil, fat, margarine and overheated non-stick cookware may be equally
harmful.
Before using your range
All products are wiped clean with solvents at the factory to remove any visible signs of dirt, oil, and grease which
may have remained from the manufacturing process. There may be some burn off and odors on rst use of the
appliance—this is normal.
7
Ofcine Gullo

1. Commutator
2. Commutator
3. Electrical connection
4. Resistance
5. White pilot light
6. Green pilot light
7. Thermostat
8. Safety thermostat
INSTALLATION MANUAL
ELECTRICAL SCHEME
The installation of this appliance must conform with all applicable local codes.
In the absence of local codes, the installation must conform to the latest level of the National Electric Code, ANSI/NFPA
70.
If the electrical supply is not turned on or is interrupted the appliance will not operate. The applicable wiring diagram
for this appliance is below. The circuit where you wire your appliance to must be grounded and polarized. We
recommend the circuit for your appliance be a non-GCFI dedicated line.
Fig. A
FIG. B
SCHEMA ELETTRICO , SCHALTPLAN, SCHEMA ELECTRIQUE , WIRING DIAGRAM,
ESQUEMA ELECTRICO
549025900 M00_00
1-2
Commutatore Umschalter Commutateur Commutator Commutador
3
Morsettiera arrivo linea Klemmleiste linie Plaque à borne arr. Ligne Electrical connection Conexión eléctrica
4
Resistenza Heizelement Résistence Resistance Resistencia
5
Spia bianca Kontrolleuchte weiß Lampe témoin blanche White pilot light Piloto blanco
6
Spia verde Kontrolleuchte grün Lampe témoin verte Green pilot light Piloto verde
7
Termostato Thermostat Thermostat Thermostat Termostato
8
Termostato sicurezza Sicherheits-thermostat Thermostat de sécurité Safety Thermostat Termostato seguridad
Ofcine Gullo8
9
Ofcine Gullo
INSTALLATION INSTRUCTIONS
This appliance is manufactured by OFFICINE GULLO S.r.l
Headquarters and factory
50012 Antella - Bagno a Ripoli (FI) Italy
via della Torricella, 29, - Tel. [phone]
In the US call 800 620 8490
ELECTRICAL INSTALLATION
WARNING: All electrical work must be performed by a qualied electrician.
Please ensure that the appropriate electrical codes or prevailing local building codes and ordinances are adhered
to.
Ensure that the electricity supply is disconnected at source. Do not use an extension cord or adapter plug with this
appliance.
This appliance must be grounded. Connect to a properly grounded branch circuit, protected by an appropriate
circuit breaker.
Home page http:// www.officinegullo.com
E-Mail: [email protected]
Keep the appliance area free and clear from combustibles.
Do not obstruct the ow of combustion and ventilation air.
This manual shall be retained for future reference.
The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our
sales conditions.
BEFORE YOU BEGIN
The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,
maintenance and suitable operation of the product. The manufacturer further declines all responsibility for injury due
to negligence and the warranty of the unit automatically expires due to improper maintenance and/or installation.
BEFORE YOU BEGIN: It is advisable to test run the oven before installation.
BEFORE STARTING please read this entire document and ensure you are fully conversant with the requirements and
limitations.
TECHNICAL ELECTRICAL DATA TABLE
DIMENSIONS
cm POWER SUPPLY Power max kW
Absorbition
max A
Power supply
cable
F*S6EM 60 x 70 x 29h 230V (110+110)
50/60 Hz 7,4 32,17 3 x 6 mm²

9
Ofcine Gullo
INSTALLATION INSTRUCTIONS
This appliance is manufactured by OFFICINE GULLO S.r.l
Headquarters and factory
50012 Antella - Bagno a Ripoli (FI) Italy
via della Torricella, 29, - Tel. [phone]
In the US call 800 620 8490
ELECTRICAL INSTALLATION
WARNING: All electrical work must be performed by a qualied electrician.
Please ensure that the appropriate electrical codes or prevailing local building codes and ordinances are adhered
to.
Ensure that the electricity supply is disconnected at source. Do not use an extension cord or adapter plug with this
appliance.
This appliance must be grounded. Connect to a properly grounded branch circuit, protected by an appropriate
circuit breaker.
Home page http:// www.officinegullo.com
E-Mail: [email protected]
Keep the appliance area free and clear from combustibles.
Do not obstruct the ow of combustion and ventilation air.
This manual shall be retained for future reference.
The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our
sales conditions.
BEFORE YOU BEGIN
The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,
maintenance and suitable operation of the product. The manufacturer further declines all responsibility for injury due
to negligence and the warranty of the unit automatically expires due to improper maintenance and/or installation.
BEFORE YOU BEGIN: It is advisable to test run the oven before installation.
BEFORE STARTING please read this entire document and ensure you are fully conversant with the requirements and
limitations.
TECHNICAL ELECTRICAL DATA TABLE
DIMENSIONS
cm POWER SUPPLY Power max kW
Absorbition
max A
Power supply
cable
F*S6EM 60 x 70 x 29h 230V (110+110)
50/60 Hz 7,4 32,17 3 x 6 mm²

Ofcine Gullo10
Picture 2E
There are several screws around the
perimeter of the back panel, to remove the
panel you need to remove all the screws
around the perimeter and them pull away
the panel to access the terminal block.
IMPORTANT ! MAKE SURE TO ALWAYS
DISCONNECT THE APPLIANCE FROM
THE ELECTRICITY BEFORE WORKING
ON IT.
Picture 1E
Electrical Supply.
This appliance requires electrical supply – ensure an appropriately qualied person completes the electrical
connection.
The appliance must be connected to an equipotential system. The connection screw is positioned at the back of the
appliance and is identied by the symbol
Attention! the manufacturer cannot be held responsible for, and does not cover in the guarantee any damage
resulting from bad or faulty connections.
The appliance may be supplied without the connection cable. In this case, the connection cable must have the
following characteristics: it must be type H05RNF and must have an adequate section for the power of the appliance
(see technical data table).
To install, proceed in the following way:
-Remove the back panel bye removing the screws that are around its perimeter as shown in picture 1E;
-Fit the connection cable through the cable channel, connect the conductor wires to the corresponding terminals in
the junction box as shown in picture 2E below and x them into place.
-Block the cable with the cable blocker, and reassemble the panel. The ground wire must be longer than the others
so that if the cable blocker should break for any reason, it will disconnect after the hot wires.
The installation of this appliance must conform with all applicable local codes. In the absence of local codes, the
installation must conform to the latest level of the National Electric Code, ANSI/NFPA 70.
11
Ofcine Gullo
USER MANUAL
INSTRUCTIONS FOR USE
Attention! Use the appliance only under surveillance.
Fry tops are appliances for cooking meat, sh, eggs, vegetables, cheese, etc.
LOADING
Before using the appliance for the rst frying, it is necessary to clean it carefully (see paragraph “cleaning and care”).
Check the connection of the appliance and start it up following the instructions.
When using the hotplate for the rst time, it is advisable to let all the hotplates work for a few minutes at maximum
power, in order to remove any humidity from the insulating mass of the elements.
Warning! Never put hands when working.
Check that the griddle is inserted.
Switch on the switch situated above the appliance.
Turn the knob from ”O” into the desired position between 120°F and 560°F; the white and green lights come on.
The green light indicates the presence of electrical tension.
The white light shows that the heating element is working; when the temperature is reached it goes out.
To turn off the appliance turn the knob into position “O”.
SPECIAL INDICATIONS
During use of the fry-top, it is advisable to clean the hotplate and remove all the residue which is deposited, using the
proper brush or a damp cloth.
Attention: The cutting and sharping utensils damage the chromed plate.

11
Ofcine Gullo
USER MANUAL
INSTRUCTIONS FOR USE
Attention! Use the appliance only under surveillance.
Fry tops are appliances for cooking meat, sh, eggs, vegetables, cheese, etc.
LOADING
Before using the appliance for the rst frying, it is necessary to clean it carefully (see paragraph “cleaning and care”).
Check the connection of the appliance and start it up following the instructions.
When using the hotplate for the rst time, it is advisable to let all the hotplates work for a few minutes at maximum
power, in order to remove any humidity from the insulating mass of the elements.
Warning! Never put hands when working.
Check that the griddle is inserted.
Switch on the switch situated above the appliance.
Turn the knob from ”O” into the desired position between 120°F and 560°F; the white and green lights come on.
The green light indicates the presence of electrical tension.
The white light shows that the heating element is working; when the temperature is reached it goes out.
To turn off the appliance turn the knob into position “O”.
SPECIAL INDICATIONS
During use of the fry-top, it is advisable to clean the hotplate and remove all the residue which is deposited, using the
proper brush or a damp cloth.
Attention: The cutting and sharping utensils damage the chromed plate.

Ofcine Gullo12
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a
dry cloth. Do not use abrasive or corrosive detergents.
All residues of food must be removed from the hotplate with the proper spatula. The surface must be cleaned well
and then greased with a lm of vegetable oil. Remove the drip pan, empty it and wash it carefully.
General cleaning guidelines:
Wash surfaces gently with a soft damp cloth; use a neutral liquid soap with water for daily cleaning. Rinse completely
with water, dry any overspray. Never use an abrasive material such as a brush or scouring pad to clean surface. The
use of abrasive cleaners, cleansers or disinfectants will damage the surface nish and void the warranty.
We also recommends the general practice of spot testing all cleaning agents on an inconspicuous area prior to
applying.
We suggest a semi-annual wax routine using a high quality clear carnauba paste wax to extend the life of a living
nish. This will keep the nish close to its original form and minimize the appearance of use. The use of polishing
agents can damage nish and void the warranty.
Note that prolonged contact with certain items such as citrus fruit juice, salt, vinegar, mustard, pickles, mayonnaise,
anti-bacterial soap and wines on your surface for prolonged periods will also alter all surface nish.
NEVER USE:
• Steel wool pads
• Bleaches containing hypochlorite
• Silver dip cleaners or polishes of any type.
Cleaning burnished brass surfaces
The antiquing nish of the surface (Burnished Brass) is the result of natural oxidation that has been accelerated and
it is a “living nish”. Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not
cared for properly.
The unique characteristic of these nishes is that they wear and age over time. Essentially, the nish replicates what
nature would do to the surface material naturally when exposed to the environment.
These products will generally tend to darken slightly on the areas that are infrequently touched and lighten or highlight
on the areas that are contacted on a consistent basis. Soaps, acidic uids, and astringent cleaners can damage
the nish. Avoid using abrasive pads, sponges, or cloths to clean the product. Do not allow water spots to dry on.
Cleaning chromed brass surfaces
This nish is achieved by chrome plating solid brass and it is a “living nish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.
This durable nish will not change if the general cleaning guidelines are followed.
Please follow the general cleaning guidelines to keep this nish close to its original form and minimize the appearance
of use.
Cleaning nickeled brass surfaces
This nish is achieved by nickel plating solid brass and it is a “living nish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.
Oxidation that may appear over time on the nickel plated brass surfaces is a normal characteristic of this living
nish. Please follow the general cleaning guidelines to keep this nish close to its original hue and minimize the
appearance of use.
13
Ofcine Gullo
Cleaning power coated surfaces
Our electrostatic powder coating nish is what you see on all of the colored (painted) areas of our products, applied
at our factory by a standard process and heat cured in special kilns.
This nish is very durable and strong please follow the general cleaning guidelines to keep this nish close to its
original form and minimize the appearance of use.
Cleaning brushed stainless steel
Our high-quality brushed stainless steel is resistant to stains, rust and corrosion. Is made of ultra hi-gauge stainless steel
that is being brushed to provide you with the unique patina nish only found in our products. Although our products
are virtually indestructible, however scratches can occur.
Everyday maintenance is simple, by wiping it down with a damp cloth and soapy water. Never use abrasive pads
or chemical products.
Scratches
Scratches on stainless steel surfaces aren’t always bad. In fact, our brushed stainless steel nish is accomplished by
millions of little scratches. But in the event that you have a deep scratch that you want to care for, the surfaces can
always be re “brushed” using a hand held Orbital Sanding machine, with a 3M Maroon pad.
Orbital sanding
machine
3M Maroon Pad
Stains and rust
Any rust that appears on stainless steel is the result of iron particles coming from external sources. If you want to
remove any rust stains from your products, use a cleaning agent containing oxalic acid. Always use mild, non-
abrasive cleaning agents to remove stubborn stains from your stainless steel and make sure you thoroughly rinse
away any cleaning liquids once nished cleaning your stainless steel.
NEVER USE:
Steel wool pads
Stainless steel cleaners
Bleaches containing hypochlorite
Silver dip cleaners
Leaving foods like citrus fruit juice, salt, vinegar, mustard, pickles and mayonnaise on your surface for prolonged
periods can cause pitting and corrosion.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Disconnect the appliance and notify your authorized service center or call our main line at 800 620 8490

13
Ofcine Gullo
Cleaning power coated surfaces
Our electrostatic powder coating nish is what you see on all of the colored (painted) areas of our products, applied
at our factory by a standard process and heat cured in special kilns.
This nish is very durable and strong please follow the general cleaning guidelines to keep this nish close to its
original form and minimize the appearance of use.
Cleaning brushed stainless steel
Our high-quality brushed stainless steel is resistant to stains, rust and corrosion. Is made of ultra hi-gauge stainless steel
that is being brushed to provide you with the unique patina nish only found in our products. Although our products
are virtually indestructible, however scratches can occur.
Everyday maintenance is simple, by wiping it down with a damp cloth and soapy water. Never use abrasive pads
or chemical products.
Scratches
Scratches on stainless steel surfaces aren’t always bad. In fact, our brushed stainless steel nish is accomplished by
millions of little scratches. But in the event that you have a deep scratch that you want to care for, the surfaces can
always be re “brushed” using a hand held Orbital Sanding machine, with a 3M Maroon pad.
Orbital sanding
machine
3M Maroon Pad
Stains and rust
Any rust that appears on stainless steel is the result of iron particles coming from external sources. If you want to
remove any rust stains from your products, use a cleaning agent containing oxalic acid. Always use mild, non-
abrasive cleaning agents to remove stubborn stains from your stainless steel and make sure you thoroughly rinse
away any cleaning liquids once nished cleaning your stainless steel.
NEVER USE:
Steel wool pads
Stainless steel cleaners
Bleaches containing hypochlorite
Silver dip cleaners
Leaving foods like citrus fruit juice, salt, vinegar, mustard, pickles and mayonnaise on your surface for prolonged
periods can cause pitting and corrosion.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Disconnect the appliance and notify your authorized service center or call our main line at 800 620 8490

Tel. [phone] | info@ofcinegullo.com
Via Della Torricella 29, Antella, Bagno a Ripoli - 50012 Florence - Italy
OFFICINEGULLO.COM
us
V 2.6 - 12.18