OHM 9800N-MPC-S User manual

Mega Pixel IP Camera
----User Manual
Packing List:
1. Mega Pixel IP Camera 1 pc
2. DC12V Power Adapter 1 pc
3. User Manual 1pc
4. CD 1pc
Our corporation reserves the right to make any update to this manual without
notice.

Mega Pixel IP Camera User Manual
1 /34
Contents
1 Product Overview............................................................................................................................2
1.1 Main Features..........................................................................................................................2
1.2 Basic Specification...............................................................................................................3
1.3 Hardware requirement..........................................................................................................4
2 Appearance and Installation..........................................................................................................5
2.1 Backside connection of mega pixel IP Camera....................................................................5
2.2 Hardware installation ..............................................................................................................5
3 Searching device and installingActiveX......................................................................................6
3.1 Searching device and modify network parameters..................................................................6
3.2 Checking connection...............................................................................................................8
3.3 InstallingActiveX and login device ........................................................................................8
4. Software configuration for mega pixel IP Camera...................................................................10
4.1 Liveview................................................................................................................................10
4.2 Playback ................................................................................................................................12
4.3 System...................................................................................................................................14
4.4 Video .....................................................................................................................................15
4.5 Motion alarm.........................................................................................................................17
4.6 Sensor alarm..........................................................................................................................18
4.7 Network fault alarm...............................................................................................................19
4.8 Network.................................................................................................................................20
4.9 Advanced...............................................................................................................................21
4.10 User management................................................................................................................22
4.11 Terminal...............................................................................................................................23
4.12 Storage set ...........................................................................................................................23
4.13 Local set ..............................................................................................................................25
Appendix 1 Network Interface for IP Camera...............................................................................25
Appendix 2 Network Parameters Default......................................................................................25
Appendix 3 Visits IP Camera under different network environment..........................................26

2/ 36
1 Product Overview
1.1 Main Features
User can visit the mega pixel ip camera live image and playback in IE.
It supports max 10 users visit it at the same time.
Local PC storage or network storage permitted, it is built-in SD slot and supports
several network storage protocols.
Max resolution 1600x1200.
Support CDMA1X and GRPS Mobile network.
Support local or remote arming or disarming.
Support warning detecting and gang video recording scheme. Sending the snapped picture or
alarm message by email or FTP server.
Support video masking, can be set 4 video mask areas.
Set motion detection to alarm for recording, it supports 4 detecting areas.
Sending alarm message and snapshot to user by email or FTP upload.
Support many network protocols, for example, HTTP, TCP/IP, UDP, SMTP, DDNS, DNS,
SNTP,BOOTP, DHCP, FTP, RTSP, SNMP, and so on.
Network self-adapting to match the network bandwidth for the bit rate and frame rate.
Support DDNS, LAN and Internet (ADSL、Cable Modem).
Provide alarm message for Video Lost, Motion Detection (sensitivity and area can be set) and
Sensors.
Support remote configuration, remote upgrade, and remote error testing and automatic
recovery.

3/ 36
1.2Basic Specification
Image Sensor
CMOS：1/3 inch deinterlace CMOS sensor. Min 1.5Lux
Video Compression
H.264 Main Profile
Two Streaming
Primary and Secondary streaming H.264 & MJPEG
Video Resolution
CMOS: 1600*1200, 1280*960, 1280*720.
Video Parameters
CMOS: Brightness, Chroma, Saturation, gamma, Contrast,Acutance, Red,
Blue and Image quality.
Streaming Type
Pure Video Streaming or Audio and Video streaming.
Video Frame rate
CMOS: 1-30 fps，can be set under different resolution.
Video Compression
bit rate
30Kbit/S～8MKbit/S
Audio Input
1 channel linear input, input impedance 1 K Ohms
Audio Compression
G.726, G.711, ADPCM
Audio Output
1 channel Linear output
Two-way talk input
SupportAudio two-way talk
Local Recording
Support SD card to record the image and snapshot. SD2.0 standard.
Support IP-San storage.
System Interface
10Base-T/100Base-TX Ethernet Port
WiFi（802.11b/g）
1 RS485
USB port
SD Slot
Alarm Input
1 channel on/off input, Support NO(open),or NC(closed)
Alarm Output
1 channel on/off output, 120VAC 1A/24VDC 1A
PoE
POE standard 802.3AF-class 0
Power Supply
DC 12V 1A
Power Consumption
Less than 6W
Work Temperature
-10℃~ 55℃
Work Humidity
10% ~ 85%
Storage
Temperature
-20℃~ 70℃

4/ 36
1.3Hardware requirement
The lowest configuration for hardware
◆CPU: Pentium 2.8 GHz
◆Memory: 512 MB
◆Graphic Card: TNT2
◆Sound Card: Speaker, Two-way talk
◆Hard Disk: Bigger than 40G
Recommended configuration for hardware
◆CPU: Dual-core 2.6GMhz
◆Memory: 1GB
◆Graphic Card: Nvidia Geforce FX5200 orATI RADEON 7000(9000) series 256MB video
memory
Operation System
◆32 bit Windows2000, Windows XP, Windows2003, Windows Vista and
64 bit Windows2003、Windows XP.
Software
◆IE 6.0 or Better
◆DirectX8.0 or Better
◆TCP／IP protocol
PC system other requirement
The PC graphics card is required to support conversion and zoom in & out of image color. The
tested VGAare as follows: Nvidia Tnt/Tnt2, Geforce Mx200/400/420/440, Fx5200/5600 and its
series;ATIR adeon7000/7200/7500/8500/9000/9200/9500/9600and its series, MatroxG450/550;
INTEL845G/865G and its series. Please attend that the driving of graphics card must support
hardware zoom in & out function.

5/ 36
2 Appearance and Installation
2.1 Backside connection of mega pixel IP Camera
Note：
The power input DC12V 50Hz 1A.Don’t use other power supply to damage the mega
pixel ip camera.
Explanations:
LAN: Ethernet Port
RST: Reset Button (default set)
DC12V: Power Supply, DC 12V/1A
A out: Audio Output
A in: Audio Input
SD Card: SD Card slot
AUTO IRIS: Auto Iris port, support DC Lens
ANT: WiFi interface
ALM out: 1 Alarm output
ALM in: 1 Alarm Input
GND: Signal ground, alarm ground, RS485 ground
RS485: RS485 Control interface, connect to Pan/Tilt or encoder, support many protocols
SD Card: SD slot
2.2 Hardware installation
2.2.1Connecting mega pixel IP camera through Router/Network Switch/Hub

6/ 36
Step1: Connect power supply (DC 12V)
Step2: Connect LAN port with router/network switch/ hub via RJ45 cable.
2.2.2 Connect LAN port with PC via RJ45 cable.
The Light of LAN port turns green within 5 seconds under the normal network situation after power
on.
3 Searching device and installing ActiveX
3.1 Searching device and modify network parameters
Run “SearchNVS” to find the default IP and modify mega pixel ip camera network parameters
according to clients’local PC IP gateway (Such as IP address, subnet mask, gateway and so on)
How to run “SearchNVS”,
A: Find the NVSCenter software in 【Application】file from the CD.
B: Install the NVSCenter software, then do it as follows to find SearchNVS: 【Start】---【all
programs】--- 【NVS Center】---【Search NVS】.
Note：
1. The factory settings of the IP Camera as follows IP: 192.168.55.160; Subnet mask:
255.255.255.0.
2. User name: admin; Password: admin
3. Run the SearchNVS software to search and modify IP Camera network parameters .It is
multicast protocol. But the firewall forbids the multicast data packet. So please close the firewall
first.
(1)Click【SearchNVS】button to run SearchNVS software as follow:
【Local IP】Display the local PC IP. If your PC is NIC or multi-addressed local IP, please select one
IP address to connect NVS.

7/ 36
(2)Set IP address for mega pixel ip camera.
Your mega pixel ip gateway must be same as your local PC’s gateway. Then you can
visit IP camera. So we need to set the IP address for the IP camera before using。
To get your local PC IP configuration information: click “start”, choose “run”, then input
“command” or “cmd”(Windows 2000/XP system).click “confirm”, then input “ ipconfig” and
press “Enter” button, you will get following information:
Now please remember the above IP Address, Subnet Mask, Default Gateway，then set
the IP address of mega pixel ip camera according to your local PC IP address. For
example :192.168.１.100.
Please make sure the Default Gateway and Subnet Mask to be same.
Click 【Set】to get the following windows:
After setting, click “OK”, then mega pixel IP camera will restart.

8/ 36
3.2 Checking connection
To check connection works well: “Start”→ “Run”→ “cmd”.
Input: “ping 192.168.1.100”, Click “Enter” button.
That means the IP Camera works normally and connects to network correctly.
[Then use SearchNVS software to search and modify network parameters (such as IP address,
subnet mask, gateway and so on according to clients’local IP information)].
3.3 Installing ActiveX and login device
You need to install ActiveX when you visit mega pixel IP camera for the first time through Internet
Explorer.
How to install ActiveX:
Download the ActiveX from Internet Explore: input the IP address of mega pixel IP camera in
Internet Explore; it appears Login interface as follows:
Click【File】to download the ActiveX
A new dialogue box pops up, click 【Run】or 【Save】to download ActiveX, after download
it , double-click the downloaded file “xdview.exe” to install it as follows:
Download ActiveX

9/ 36
Note: ActiveX have to be installed.
Close current Internet Explorer, click “Install” button，it will be installed the ActiveX and shows “Install
OK！”.
Open one Internet Explorer, and input IP address of IP Camera，for example:192.168.55.160,
it will show:
Input User name (Default: admin)、Password (Default: admin)，click “Submit” to show as
follows:
Video Name
Image display
Date,Time,Frame,Bitrate
display
Pan/Tilt
Function Keys
Setings

10/ 36
4. Software configuration for mega pixel IP Camera
4.1 Liveview
In the Liveview interface, User can do the operations as snap, record, replay, call, and
speaker, cancel alarm, check log, digital zoom in, full screen, P/T control, and video
parameters and image Set.
【Speaker】Audio Switch，The working status as ：
【Snap】click “Snap”, snap the current image ,it can be stored in your computer as JPG format.
【Record】Manual image recording, the current image can be stored in your computer as .MP6
format. The working status as:
【Replay】click “Replay”, it will appear a new dialogue box, user can replay the image recorded or
picture captured.
【Call】Audio Switch，If user connects Microphone and Speaker with IP camera, it can do the
two -way audio function. The working status as:
【Alarm】When there is an alarm，double-click【Alarm】to cancel the alarm manually .
【Pan control】up, down, left, right, Automatic, level and vertical Operation
【Log】some alarm messages in Log as follows.(max 512 messages)：

11/ 36
【Zoom In】it has digital zoom in on the video as follows.
【Full Screen】full screen for display.
Mega pixel IP Camera: brightness, saturation, acutance, red, blue, gamma, contrast as
follows：

12/ 36
4.2 Playback
Click【Replay】button as: , then it appears the following interface:
User can select the resolution when replaying.
User can search the recorded image files or snapped pictures in local PC or SD card
according to date.
【Date】User can check the recorded image files or snapped pictures according to the
appointed date, click the button as : It appears:
【PC】check the recorded image files or snapped pictures in local PC according to the appointed
date.
【SD Card】check the recorded image files or snapped pictures in SD Card according to the
appointed date.
【File List】Shows the current recorded image files or snapped pictures in the File List.
Click “《”icon to previous year
Click “ 》”icon to next year
Click “〈”icon to previous month
Click “ 〉”icon to next month

13/ 36
Check the current recorded image files or snapped pictures in the list as follows:
【Play】Select the recorded image or snapped picture in play list, then click “play” button as :
【Download】Searching the recorded image file or snapped pictures which downloaded from
SD card in Play list, click the “Download ”button as to download it to local PC.
【Download information】User will get the following information when click the “Download” as
Click【Pause】to pause download by manually，click【Start】to continue to download the
unfinished file，click【Delete】to del the downloaded file，click【Close】to close the download
information interface.
There are two Lists: Record & Picture:
Record List means the recorded image in PC on Feb 10, 2009
Pic List means the snapped picture in PC on Feb 10, 2009
The left of the Record / Pic List is Hour unit (from 0 to 23)
The right of the Record / Pic List is Minute unit (from 0 to 59)
The yellow icon means the image recorded / picture snapped in the current selected time.
The blue icon means the image recorded / picture snapped in the selected time.
This blue icon means the picture snapped at 11:23 on Feb 10, 2009.
The yellow icon means the image recorded at 11:23 on Feb 10, 2009.
These files were named by the recorded time. For example: the file 11_23_50.264 means
this image recorded at 11:23:50'.
Time Table

14/ 36
4.3 System
System Settings as follows：
Mega pixel IP camera system set
【Time Sync】click: “Time Sync”，The system time of the device will be synchronous with computer .
【NTP Parameter】Please input the correct NTP server address and select the correct time zone.
After save it, switch to 【Real-time Image】,The NTP sever will show the correct system time.
【System Information】Display device name, device number and user-defined device name.
Note：Rename the device name and save it, the device will restart.
【System Information】display the camera name and number message, the name can be
defined by user, and CCD camera can select PAL or NTSC.
【Upgrade】User can upgrade the uke,uoc,uwe in IE.
【Restore Default】Resume all the IP Camera parameters (Including Network parameter except
MAC address) to default factory settings.
Note: Be careful when use this function.
【Reboot】Click 【Reboot】, the IP Camera will restart after 5 seconds.
Upgrade:
Check the following steps before upgrade：
1,Check the IP camera version, User can upgrade the version in IE, and user has to upgrade three
files，the sequence of the upgrade as follows:
Step1: Application (uke)
Step2: OCX (uoc)
Step3: Web Page (uwe)
2, Check the type of upgrade file as follows:
Select type of upgrade
file

15/ 36
Note:
(1) please upgrade IPcamera according to the order, first upgrade the version (uke), Then OCX file
and Web Page file
(2) Don’t interrupt the power and internet during the upgrading IP camera.
(3) Please check the new version is the right one.
4.4 Video
（1）Mega pixel IP camera Video set
【Title】rename the video name, displaying on the lower left corner.
【OSD】display channel name, date, time, week and frame / bit rate.
【Position Adjustment】move the OSD position on video.
【Video Coding】set the preferred stream and alternate stream.
【Coding】support H.264 and MJPEG（MJPEG for mobile surveillance）.
【Image】set image resolution.
CMOS: support resolution (1600*120), (1280*960) and 1280*720.
【Quality】Options for Fine, Normal, Basic
“Fine”, default “Normal” default “Basic”default
,

16/ 36
【Advanced】select this option to set other parameters.
【I frame interval】When the network bandwidth is not good, it is good way to increase the I
frame interval to make the image fluently. The range of I frame interval is 0～200.The
smaller I frame interval, better image quality. Normally, I frame interval is twice as frame
rate.
【Quality】When the network bandwidth is not good, it is better to increase the number of
“Quality”. The smaller “Quality”, better image quality. Normally, Quality is 3-4.
【Frame rate】frame/second，
CMOS: when the resolution is 1600*1200, the frame rage: 0~15,
when the resolution is 1280*960, the frame range: 0~25
when the resolution is 1280*720, the frame range: 0~30
To set the frame rage according to the bandwidth situation, when the network bandwidth is
not good, it is good way to reduce the frame rage to make the image fluently.
【Rate Control】Select VBR or CBR( VBR means Variable Bit Rate, it is used for low bandwidth
situation; CBR means Constants Bit Rate, it is used for big bandwidth.
【Bitrate】please set the bitrate according to your network bandwidth. Better image quality for
higher bitrate settings, but it needs more bandwidth
【LAN】Default:
【WAN】Default:
Note：
This options is for professional user to set
【Enable Mask】Mask area set can be set all image or part image, the maximum 4 areas can be set.
【Snap picture parameter settings】set the picture format and resolution.
【All】mask the whole image.
【Clr】clear the mask
【Audio】Set audio ON/OFF（Default: OFF）,there are two models: Microphone and Line input. If
users don’t need audio status; please close audio input to save the DSP resource and network
resource.
【Power Frequency】Environment power frequency of the device, if it is not correct, the
image will flicker.

17/ 36
【Video Mirror】Image enantiomorphism switch
【Video Flip】Image reversal switch
After setting, click the 【save】button.
4.5 Motion alarm
Motion alarm set：

18/ 36
Motion alarm set: included schedule time, switch of the alarm, sensitivity, alarm output, alarm
record or alarm snap sending by FTP.And snap sending by email. (Default storage SD card without
selecting email or FTP)
【Schedule Set】set the two schedule times for motion alarm detection.
【Alarm output】alarm signal output.
【Alarm output duration】set the time from 0~86400 seconds.
【Email】send alarm message by email.
【Snap】set alarm snapped picture sending by email or FTP. If there are continuous alarms, the
interval time of capturing is the duration time.1 snapped picture per 1 second.
【Record】set alarm record sending by FTP
【Area set】Press the left button of mouse and drag to the detected area. Four areas can be set.
【All】Set whole area as detected area
【Clr】Clear all detected area.
After setting, click the 【save】button.
4.6 Sensor alarm
Sensor alarm set：
Sensors alarm set: included schedule time, switch of the alarm, sensitivity, alarm output, alarm
record or alarm snap sending by FTP.And snap sending by email. (Default storage SD card without
selecting email or FTP)
【Schedule Set】set the two schedule times for motion alarm detection.
【Alarm output】alarm signal output
【Alarm output duration】set the time from 0~86400 seconds.
【Email】send alarm message by email.

19/ 36
【Snap】set alarm snapped picture sending by email or FTP. If there are continuous alarms, the
interval time of capturing is the duration time.1 snapped picture per 1 second.
【Record】set alarm record sending by FTP.
After setting, click the 【save】button.
4.7 Network fault alarm
Network fault alarm：
Network fault alarm set: included schedule detecting time, switch of the alarm, sensitivity, alarm
output duration, alarm record or alarm snap sending by FTP.And snap sending by email. (Default
storage SD card without selecting email or FTP)
【Enable detect】detect network fault.
【Alarm output】alarm signal output
【Alarm output duration】set the time from 0~86400 seconds.
【Email】send alarm message by email.
【Snap】set alarm snapped picture sending by email or FTP. If there are continuous alarms, the
interval time of snapping is the duration time.1 snapped picture per 1 second.
【Record】recording 1 minute.
Note: Email and FTP can’t work when network fault happens. When the network works, the
snapped picture or recorded file will be sent by email and FTP again.
After setting, click the 【save】button.