OK Design ON A STRING Administrator Guide

www.okdesign.dk/ [e-mail] / [phone]
ON A STRING
How to aessmble
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
How to assemble
15 min
In approxmately A blanket or another soft materialA screwdriver
2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
Mount the legs by using the screws and the
How to assemble
15 min
In approxmately A blanket or another soft materialA screwdriver
2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
Mount the legs by using the screws and the
20 min
Mount the legs by using the screws and the Allen key
You need
You’ve got
2 x Legs
2 x Strings 2 x String Adjuster
2 x Cleat
8 x Allen Screw
4 x Screw
1 x Allen Key
1 x Table Top
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
Screw in the two cleats.
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
Screw in the two cleats.
Mount the legs by using the screws and the
Allen key.
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
Screw in the two cleats.
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
How to assemble
A blanket or another soft materialA screwdriver
2 x Legs
2 x String
1 x Allen Key
8 x Allen Screw 4 x Screw
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
How to assemble
15 min
You need
2 x Human beings In approxmately A blanket or another soft materialA screwdriver
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
Screw in the two cleats.
Mount the legs by using the screws and the
Allen key.
15 min
1 x Table Top 2 x Legs 2 x String
2 x String Adjuster 2 x Cleat 1 x Allen Key 8 x Allen Screw 4 x Screw
You’ve got
How to assemble
Start by placing the table upside down on a soft
material so you dont scratch the surface of the
table.
Screw in the two cleats.
Mount the legs by using the screws and the
Allen key.
Screw in the two cleats in.
How to assemble

www.okdesign.dk/ inf[email protected] / [phone]
The knot
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
You’ve got
A B
C D
EF
You’ve got
You’ve got
You’ve got
1
Tie the table
The knot.
Guide the string around the rst leg.
Apply the string adjuster to the string before looping
it around the second leg. When leading the string back,
pull it though the string adjuster again.
Now you can take it back over the rst leg again.
Maneuver the string around the leg mount.
Tighten the string and then fasten it on the cleat.
Repeat the steps for the 2nd string on the opposite side.
1
2
3
4
5
6
To minimize movement in the table addional ghtening
of the string can be required. You can easily ghten the
strings while the table is in the upright posion.
If the two strings are not ghtened equally, the table
might not be level.
For a clean ght look place the string adjusters as close
to the legs as possible.
On our website you will furthermore nd an instrucon-
al video of how to assemble the On a String table and
also a maintenance guide.
Voilà; your table is ready!
Using as a starng point. Make the knot as illus-
trated below.
1

www.okdesign.dk/ [e-mail] / [phone]
• Linoleum is a 100 % natural product made from plants and trees.
• It is environmentally friendly
• It is sound reducing
• And Easy to clean
General maintenance:
-
ral soap is recommended) or with a cleaning agent especially made for cleaning linoleum.
Wipe the surface dry immediately using a clean dry cloth. Stains can usually be removed by
Thorough cleaning:
If a linoleum surface is very dirty, clean it with linoleum cleaner and linoleum maintenance
treated correctly, restore its surface. Therefore most stains and small damages will disap-
How to prevent damages and remove stains:
-
tain the appearance and performance of linoleum, never apply oil or lacquer.
• Remove stains and spills immediately.
should never be used.
• Do not place hot items directly on to the surface (max 80 degrees Celsius).
• To preserve the colors of the materials they should as far as possible be protected from
direct sunlight. It is recommended that surfaces should not be partly covered, for example
by tablecloths etc.
General maintenance:
Wipe with a cloth wrung out in hot water with washing-up liquid.
Thorough cleaning:
Laminated surfaces can be cleaned with a cloth moistened with methylated spirits.
• Do not place hot items directly on to the surface (max 80 degrees Celsius).
NOTE: once assembled, the strings can be re-ghtened to keep the table top straight.
Maintenance of linoleum surfaces Maintenance of laminated surfaces

www.okdesign.dk/ [e-mail] / [phone]
• Det er naturligt og miljøvenligt.
• Det er støjdæmpende.
• Rengøringsvenligt
Almindelig rengøring:
Grundig rengøring:
-
-
-
fer. Skal man have glæde af linoleums udseende og andre gode egenskaber, bør det ikke
påføres olie eller lak.
• Skrappe rengøringsmidler så som grundrens, brun sæbe og opvaskemiddel må aldrig an-
vendes da det udtørrer linoleumen.
• For at bevare materialernes farve bør direkte sollys så vidt muligt undgås. Det anbefales,
Almindelig rengøring:
-
middel.
Grundig rengøring:
Vedligeholdelse af Linoleum Vedligeholdelse af Laminat
Bemærk: Snoretrækket kan strammes yderligere med den således at bordet forbliver
stramt og lige.