1 2
6HFXULQJ
%UDFNHWV
6WUXW
6KHOI
0DNHXS
6FUHZV
:LULQJ&OLS
Parts Name
Installation
Information on Graphic Symbols
This Instruction Manual and indications on the products use various types of symbols to help you safely
and correctly use the products, preventing you, people nearby, and properties from being damaged.
The symbols mean as shown below. Make sure to understand the meaning of the symbols well before
reading the instructions.
CAUTION
CAUTION
ٴ
:KHQSODFLQJWKLQJVRQ WRS
SOHDVHSODFHWKHPJHQWO\
ٴ
'RQRWOHDQDJDLQVWWKHSURGXFW
RUVXSSRUW\RXUVHOIZLWK\RXU
KDQGVRQLWDVLWPD\GDPDJHLW
RUFDXVHLWWRIDOORYHU
ٴ
' R QRW SO DFH DQ\ WKLQ J ZLW K
GLPHQVLRQVWKDWSURWUXGHIURP
WKHEDVH
ٴ
,IWKHSURGXFWUDWWOHVGXHWRORRVH
VFUHZVSOHDVHWLJKWHQWKHP
DJDLQ
ٴ
'RQRWXVHWKHSURGXFWZKHQWKH
VFUHZVDUHORRVH
0D[LPXPORDGLQJFDSDFLW\؟
NJ
8QLIRUPO\GLVWULEXWHGZHLJKW
&$87,21
6KHOI6WUXWV
¼ڭ
0DNHXS6FUHZV
ق0¼/ك¼
:LULQJ&OLS¼
6HFXULQJ%UDFNHWV
¼ڭ
Do not handle roughly, or use improperly.
Failure to follow the safety precautions
cause injury or damage to the product.
● Do not use this product as a step stool or as
a transportation equipment.
● Do not lean against the camera stand or
monitor stand.
Be careful of the following items since it
may cause injury or damage the product.
● If the product starts to creak due to loose
bolts or screws, please be sure to tighten
them again. Loosening may cause problems.
● Do not use the product if any parts have
come off. It may cause damage or lead to
accidents, such as tipping over.
Do not disassemble or repair the product.
●
Do not attempt to disassemble or repair the product
yourself. Please contact our ocial dealers when needed.
●
Do not use the product with loose bolts or
screws. Failure may cause the main unit to be
broken and cause injury.
Do not put your hands or ngers in
the gaps or movable portions. Careless
handling may cause injury.
Never remodel the product. Failure
may cause a malfunction or accident.
● Remodeling by the customer may cause a
malfunction. In that case, Okamura will not
take any responsibility or liability for any
phenomena caused.
● If you need to remodel the product, contact
our Customer Service.
Do not load anything more than the maximum
loading capacity of the product. It may cause
you to fall or damage to the product.
●Maximum loading capacity:3kg（Uniformly
distributed weight）
＊ What is “Uniformly distributed weight”・・・
It means to load on a work surface, etc. evenly. Uneven loading on
the product may cause balance loss and thus drop or fall.
Appropriate Ventilation Measures
● Many chemical substances will be released by the product when it is rst purchased. Suciently
ventilate or expose the product to moving air for some time after purchasing it.
● Do not completely close windows when using the product in rooms with conspicuously high
temperatures/ humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F)
and relative humidity in excess of 50%).
3. Assembly Guide
Explanation Regarding Alert Labels
This product comes with an alert label intended
to prevent harm or damage to the user's life,
body or property. Please follow the precautions
when using the product. Do not intentionally
tear, stain, scratch or peel o the label.
Components
Make sure that you have all of the necessary parts before
Be sure to use the product indoors.
●
Do not use the product outdoors or in places exposed to
water. Failure may cause damage such as warping and mold.
Avoid places with high temperature, high
humidity, and extreme dryness. Failure may
cause deformation, discoloration, and mold.
Avoid places directly exposed to heat or
wind from stoves or air conditioners. Failure
may cause deformation or discoloration.
Avoid places exposed to direct sunlight.
Failure may cause deformation
or discoloration.
●
When installing the product near windows, constantly
block direct sunlight with curtains, blinds, etc.
Install the product so that it will be horizontal.
● When using the product, please keep the main
structure horizontal. Installing it where it cannot
be kept horizontal may distort the structure.
This indicates that improper handling may cause injury or property damage.
Caution
● Secure enough workspace before assembly. Failure to do so may cause unexpected injury.
● Assembly must be conducted by two or more people. Conducting by one person may cause injury.
●
Use specified tools for assembly. Improper assembly, such as not completely tightening screws, may cause damage to the
product or cause the product to overturn resulting in injury.
● Take gloves off when using power tools. Gloves may get caught in tools causing injury.
●
Be careful when handling the ends and backs of parts, and with the gaps between parts. Careless handling may cause injury.
Assembly Preparations
● Ensure that you have all the parts required.
● Prepare tools for assembly.
Safety Instructions (Make sure to follow these instructions)
The symbols are there to call your attention to the parts indicated.
1.
Safety Instructions (Make sure to follow these instructions)
This indicates that improper handling may cause injury or property
damage.
CAUTION
Please follow the instructions below. Failure may cause damage to the product. In that case,
Okamura will not take any responsibility or liability for any phenomena caused.
2. Operating Precautions
● For screws, lightly tighten and then completely tighten them.
● Handle the product with care.
