Olympus C-3000 - 3.2MP Digital Camera User manual

151
MOVIE PICTURE DISPLAY MENU
*Press the Menu button to set the following items when the Mode dial is
set to and a movie picture is displayed on the LCD monitor. (p. 44)
Monitor Display Use
Displaying movie pictures as a movie. (p. 152)
Displaying information about the image (date and
time, file name, etc.). (p. 154)
Creating a movie index (p. 156) and editing
movies. (p. 158)
Performing All-Frame erase (p. 160) or Card format.
(p. 162)
Making adjustments. [All reset (p. 194), Beep sound
(p. 204), Index-Display adjustment (p. 218),
Brightness (p. 215), Date/time set (p. 34)]
MODE
SETUP
CARD
SETUP
FUNCTION
INFO
MOVIE
PLAY
➠
➠
➠➠➠

152
You can play movies you have recorded. will appear on the LCD
monitor for movies.
Set the Mode dial to .
• The LCD monitor turns on
automatically.
Display a picture with on
the LCD monitor using the
Jog dial.
• Picture information is displayed
for 5 seconds. Press the Erase
or Menu button to display the
picture information again.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select
MOVIE PLAY.
• To cancel, press the Menu
button.
Press the right arrow on the
Jog dial to select START.
Press the OK button to start
the movie.
• The card access lamp blinks
for a moment, then the movie
starts.
6
5
4
3
2
1
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
PLAYING MOVIES
MOVIE
PLAY
CARD
SETUP
START
[1/1]24
MODE
SETUP
FUNCTION
INFO
3
542 1
6

153
Press the OK button during
the movie to pause it. Press it
again to restart.
• The following operations can
be performed during pause.
Press the top arrow on the Jog
dial to pause at the beginning
of the movie. Press the bottom
arrow to pause at the ending of
the movie.
Press the right arrow on the
Jog dial to start the movie.
Press the left arrow to play it
backwards.
Press the Menu button when
movie playback is finished.
The Menu reappears. Press it
again to exit the Menu.
8
7
12.23.’00 21:56 24
HQ
Note:
•Sound cannot be played back by this camera. Connect it to a TV or
personal computer for sound playback.(p. 124)
8
7

154
PICTURE INFORMATION
You can display picture information (settings, date/time, file number, etc.)
on the LCD monitor.
Set the Mode dial to .
Press the Menu button to
display the Menu.
Press the top/bottom arrows
to select INFO.
•To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
ON.
Press the left arrow on the
Jog dial to confirm the setting.
Press the OK button to save
the setting and cancel the
Menu.
6
5
4
3
2
1
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
[1/1]24
MOVIE
PLAY
CARD
SETUP
MODE
SETUP
FUNCTION
INFO
OFF
ON
2
543 1
6

155
HQ
SIZE: 320 240
0" / 100"
12.23.,00 21:56
Sound record
Protect
Movie picture
Battery check
Recording mode
Image size
White balance
Date/Time
Seconds
During movie recording
FILE: 123-3456
Movie picture
Battery check
File name
When a movie picture is selected
Note:
•When picture information is displayed, the frame number will not be
displayed.
•Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off. (p. 194)
• The information is displayed for a period of 5 seconds.

156
FUNCTIONS
These functions enable you to create an index of recorded images and to
edit images.
CREATING AN INDEX
Recorded movies can be displayed as an index. After an index is
created, it can be saved on the card as a still picture image.
Set the Mode dial to .
Using the Jog dial, display an
image with the mark on
the LCD monitor.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select
FUNCTION.
After pressing the right arrow
on the Jog dial, press the
top/bottom arrows to select
MOVIE INDEX, then press the
OK button.
Press the right/left arrows on
the Jog dial to select the first
frame for the index display,
then press the OK button.
•If the top arrow on the Jog dial
is pressed, the first frame is
displayed, and if the bottom
arrow is pressed, the last
frame is displayed. When the
first frame is selected, the
displayed images other than
the last frame will change
accordingly.
6
5
4
3
2
1
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
[1/1]24
MOVIE
PLAY
CARD
SETUP
MODE
SETUP
FUNCTION
INFO
MOVIE
INDEX
MOVIE
EDIT
3
765
42
1
8

157
•The total movie time and time
of the current frame will
appear in the left corner on the
LCD monitor.
•To go to the next frame, press
the right arrow on the jog dial
and to go the previous frame,
press the left arrow.
Press the right/left arrows on
the Jog dial to select the last
frame for the index display.
•Just as when the first frame is
selected, the image can be
selected by using the Jog dial.
When the last frame is
selected, the displayed images
other than the top frame will
change accordingly.
•Press the Menu button to go to
back to first frame selection.
Press the OK button to record
the index image in the card
and cancel the Menu.
•The index image will be
recorded in the corresponding
mode listed below.
HQ [SQ2 (1024 x 768/HIGH)
SQ [SQ2 (640 x 480/HIGH)
8
7
CANCEL
OK
0" / 88"
0" / 88"
CANCEL
OK
Note:
• The index can be displayed in 9 frames only.

158
FUNCTIONS (Cont.)
EDITING A MOVIE
This function is used to delete unnecessary portions of recorded movies
or to split one movie into two.
Set the Mode dial to .
Using the Jog dial, display an
image with the mark on
the LCD monitor.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select
FUNCTION.
After pressing the right arrow
on the Jog dial, press the
top/bottom arrows to select
MOVIE EDIT, then press the
OK button.
5
4
3
2
1
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
[1/1]24
MOVIE
PLAY
CARD
SETUP
MODE
SETUP
FUNCTION
INFO
MOVIE
INDEX
MOVIE
EDIT
3
876
542
1
9

159
Press the right/left arrows on
the Jog dial to select the first
frame, then press the OK
button.
•If the top arrow on the Jog dial
is pressed, the first frame of
the movie is displayed, and if
the bottom arrow is pressed,
the last frame is displayed.
Press the right/left arrows on
the Jog dial to select the last
frame, then press the OK
button.
•Just as when selecting the top
frame, the top/bottom arrows
on the Jog dial can be used to
select the frame.
Press the right/left arrows on
the Jog dial to select NEW or
ERASE.
•If NEW is selected, the edited
movie is saved as a new
movie with a different name.
•If ERASE is selected, the
edited movie is saved under
the original name. The original
movie is discarded.
Press the OK button to record
the movie and cancel the
Menu.
9
8
7
6
0" / 88"
CANCEL
OK
0" / 88"
CANCEL
OK
NEW ERASE

160
CARD SETUP
ALL-FRAME ERASE
Set the Mode dial to .
Display a picture with on
the LCD monitor using the
Jog dial.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select CARD
SETUP.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
.
Press the OK button to display
.
YES NO
6
5
4
3
2
1
1
76
542
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
3
[1/1]24
MOVIE
PLAY
CARD
SETUP
MODE
SETUP
FUNCTION
INFO
YES NO

Press the OK button with YES
selected to erase all the
pictures in the card.
•To cancel, select NO using the
right arrow on the jog dial.
When complete, NO PICTURE
appears on the LCD monitor.
• Protected frames will remain in
the card, and the last frame will
be displayed. (p. 112)
8
7
161
Caution:
•
Be careful not to erase important picture data by mistake as it cannot
be retrieved.
• Never open the card cover, eject the card, remove the batteries, or pull
the plug while erasing pictures. It may destroy the data in the card.
• When a write-protect adhesive seal is placed on the card, the camera
does not enter the Erase mode.

CARD FORMAT
You can format the card.
Set the Mode dial to .
Display a picture with on
the LCD monitor using the
Jog dial.
.Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select CARD
SETUP.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
.
Press the OK button to
display .
Press the OK button again
with YES selected to format
the card.
• To cancel, select NO using the
right arrow on the Jog dial and
press the OK button.
When complete, NO PICTURE
appears on the LCD monitor.
8
7
YES NO
6
5
4
3
2
1
162
CARD SETUP (Cont.)
1
76
542
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
[1/1]24
MOVIE
PLAY
CARD
SETUP
MODE
SETUP
FUNCTION
INFO
3
YES NO

163
Note:
•Formatting the card erases the existing data, including pictures which
have been write-protected from the camera. Be careful not to erase
important data when formatting a recorded card.
•Formatting will not be engaged when a write-protect adhesive seal is
placed on the card.
•Non-Olympus brand cards or cards formatted from or used in a computer
must be formatted by the camera. These cards may take longer to record
than recommended Olympus brand cards.
• It is highly recommended that you confirm the contents before formatting.

164

OLYMPUS DIGITAL CAMERA
4
STORING DATA FOR
PRINTING PICTURES
●Recorded images can be printed out with a printer.
●Selected images can be reserved in a SmartMedia
card for printing on a printer or at a photo lab that
supports the DPOF (Digital Print Order Format)
system.

166
ABOUT PRINT SETTINGS
You can make prints of images stored in a SmartMedia, using one of the
following methods:
1. Images in the SmartMedia can be selected for printing, as well as the
number of copies for each and whether or not to print the date and
time with them. This information is saved in the card (Print-reserve)
for later printing from a printer or at a photo lab that supports DPOF.
2. If a SmartMedia with Print-reserve data recorded in it is inserted into
an Olympus CAMEDIA P-330N/P-300 printer, printing can be
performed at the touch of a button. For more information, consult
your printer’s user manual.
3. Images can be transferred directly to a personal computer via USB or
a PC connection kit, or by using an optional FlashPath, PC Card
Adapter or USB SmartMedia Reader/Writer. Images can then be
printed on a printer connected to the personal computer using a
softtware application. For more information, consult the software’s
user manual.
About DPOF
DPOF (Digital Print Order Format) is a system that allows you to
select images in a SmartMedia card to be printed as well as the
number of copies to make of each. This information is stored in the
card for use by printers or photo labs that support this system to
make prints automatically.

167
Note:
•Images taken with this camera can also be printed using a printer or at a
photo lab that supports the Design rule for Camera File system/DCF.
•DPOF reservations set by another device cannot be changed by this
camera. Make changes using the original device.
•If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations.
•Even if an image appears with the message "PICTURE ERROR", print
reserve may be performed on it. In such a case, the print reserve icon
() does not appear on the screen where an image is displayed for full
view. Since appears on the screen where multiple images are
displayed (index-display mode), it is possible to confirm the print reserve
status.
•This camera cannot be directly connected to printers such as the
Olympus P-300 digital printer.
• Not all functions may be available on all printers or at all photo labs.

You can store data for making prints with a printer or at a lab that
supports this system.
ALL-FRAME PRINT RESERVE
You can store data for printing all the pictures in the card as well as
choose the number of prints to make.
Set the Mode dial to .
Press the Print button to
display the Print reserve
setting screen.
•If Print-reserve data is already
stored in the card, a screen
will appear giving you the
choice of resetting the data or
keeping it. (p. 177)
Select using the Jog dial,
then press the OK button.
•The print number and date
setting screen is displayed.
Press the top/bottom arrows
on the Jog dial to select .
4
3
2
1
168
PRINT-RESERVE
1
2
8
76
543
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
CANCEL
PRINT ORDER
SET
OK

Press the left/right arrows on
the Jog dial to enter the
number.
•Press the left arrow to decrease
the number, and the right arrow
to increase it.
•The number of prints can be
set from 0 to 10.
Press the top/bottom arrows
on the Jog dial to select .
Press the left/right arrows on
the Jog dial to select DATE,
TIME or NO.
Press the OK button.
•The Menu screen disappears
and the print reserve indicator
and the number of prints are
displayed on the screen.
8
7
6
5
169
Note:
• The setting will remain until it is readjusted.
•If you are printing using the P-330N or P-330, only the first 255 images
can be printed.
• Print reserve may take considerable time in some cases.
: 1
:
DATE TIME NO
CANCEL SET
OK

SINGLE-FRAME PRINT RESERVE
You can store data for making prints with a printer or at a lab that
supports this system.
Set the Mode dial to and
display a still picture.
Press the Print button to
display the Print reserve
setting screen.
•If Print-reserve data is already
stored in the card, a screen
will appear giving you the
choice of resetting the data or
keeping it. (p. 177)
Press the top/bottom arrows
on the Jog dial to select ,
then press the OK button.
•The Print reserve setting
screen is displayed. If the
zoom lever is pressed toward
T, printing with trimming is
available. (p. 174)
3
2
1
170
PRINT-RESERVE (Cont.)
1
6
CANCEL
PRINT ORDER
SET
OK
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
6543
2