Olympus D-360 R User manual

Olympus
D - 360 R
Digital Camera
basics for getting started...
Batteries
Use 4 AA Alkaline or 4 NiMh (rechargeable) batteries
NOTE: Check what kind of batteries are in the camera when replacing
batteries. Do not accidentally dispose of rechargeable batteries and DO NOT
accidentally put AA Alkaline batteries in the recharger (They will explode).
Smart Media Card
Use a 32 MB Smart Media Card or less.
When Inserting a card into the camera
Do not touch the gold metallic part of the card.
Make sure the camera is turned off.
Open the Card compartment cover.
Insert the Card correctly. (The clipped corner should match the
illustration on the cameras.
Close the cover tightly.
Turn On/Off
Turn camera on by opening the sliding lens cover.
Turn camera off by closing the sliding lens cover.
K Martell Page 1 June 2004

To turn the camera on in the display mode. Press the LCD monitor
ON/OFF button with the lens cover closed.
To turn the camera off in the display
mode, press the LCD monitor
ON/OFF button.
Taking Pictures
1. Open the sliding lens cover.
2. To Focus: Aim the camera at the subject, and lightly press and hold the
shutter button halfway down to lock and focus the picture.
3. To Shoot: When the green light stops blinking, the camera is ready to take
the next picture. The picture will display in the LCD panel.
Capacity (How many photos left?)
1. Open sliding lens cover. Number displayed in Control Panel is the number
of additional photos that may be taken.
2. This number will change with adjustments to the resolutions/compression.
Photo Quality
SQ - Lower Quality, if you’re printing photos, you may be disappointed.
HQ - High Quality, good compromise between quality and storage space.
SHQ - Highest Quality, best pictures but takes the most space.
Reviewing the Images
1. Press the LCD monitor ON/OFF button with the lens cover closed to set the
camera to Display Mode.
2. The last photo taken will appear.
3. Press the + button to move through the pictures on the camera.
K Martell Page 2 June 2004

4. Erasing Photos
Photos should be erased from the smart card using the camera, not the
computer. Deleting photos from the smart card folder in the computer
confuses the camera and creates formatting problems. There are two ways
to erase photos: one frame at a time or all frames at once.
One Frame Erase - With the lens cover closed,
1. Press the green on/off monitor button. Use the +/- to display the
desired photo.
2. Press the Erase Button. Use the +/- buttons to select “Yes”.
3. Press the OK button.
All Frame Erase - With the lens cover closed,
1. Press the green on/off monitor button.
2. Press the Menu Button several times to display the trash can mode
in the LCD monitor. (4 clicks).
3. Click OK button.
4. Using the +/- buttons select “YES” in the LCD monitor.
5. Press the OK button again. All photos will be erased.
K Martell Page 3 June 2004
OK Button
(shutter button)
Menu Button
Erase Button
ON/OFF Button
+/ - Buttons

Parts of the Camera
Front
Back
Smile! Got ya.
K Martell Page 4 June 2004