Olympus CAMEDIA C-2020 Zoom Configuration guide

OLYMPUS DIGITAL CAMERA
4
PRINTING
PICTURES

140
PRINTING PICTURES
There are two types of printing available with this camera.
One is Card-Print, which stores data conforming to the “Design rule for
Camera File system/DCF” standard in the card for making prints using a
printer or lab that supports this system. (p. 141 ~ 145)
The other is Direct-Print, which is for use with the Olympus P-330N, P-
330 or P-300 printer.
●When using the P-330N/P-330 printer, simply insert a card that
contains images into the printer and direct-print them. No cables are
necessary.
(The procedure for making prints must be performed on the printer.
See the printer instructions for details.)
●When using the P-300 printer, connect the camera to the printer to
make prints. (p. 146 ~ 156)

141
CARD-PRINT
PRINT-RESERVE (CARD)
You can store data for making prints with a printer or at a lab that
supports this system. (p. 140)
Set the Mode dial to .
Display the picture you want
to print, then press the
Shutter release button.
•appears on
the LCD monitor.
• To cancel, press the Shutter
release button again.
Press the right/left arrows on
the Jog dial to select the
number of pictures to be
printed.
Press the OK button.
•appears on the LCD
monitor.
Repeat until all the selections
are made.
5
4
3
2
1
Note:
•With the P-330N/P-330 printer, the number of pictures to be printed must
be set on the printer. Pictures with a frame number greater than 256
cannot be printed.
• The data will remain in the card until the setting is changed.
•To cancel all of the selections, select in the Print-All (card) mode.
(p. 143)
• Functions may not work fully depending on the printer or the lab used.
• It may take a while to store data in the card.
1
2
4
53
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
’99.12.23 21:56 32
0123456
SQ
x

142
Monitor display Use
For storing data for Print-All (card). (p. 143)
For storing data for Date-Print (card). (p. 144)
For storing data for Index-Print (card). (p. 145)
CARD
INDEX
➠
➠
➠
* When the Mode dial is set to and a still picture is displayed on the
LCD monitor. (Page 2/2 of the Menu.) (p. 39)
STILL PICTURE DISPLAY MENU
(CARD-PRINT)

143
PRINT-ALL (CARD)
You can store data for printing all the pictures in the card. (p. 140)
Set the Mode dial to , and
display a still picture.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select .
•To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
ON.
Press the left arrow on the
Jog dial to confirm the setting.
Press the OK button to save
the setting and cancel the
Menu.
• Make sure to press the OK
button while is displayed
on the LCD monitor.
6
5
4
3
2
1
Note:
•The last number set for the number of pictures to be printed in Print-
Reserve (p. 141) will be used for printing all the pictures.
• Pictures taken after this function is selected will not be printed.
• cancels all the settings made for Card-Print. (p. 141 ~ 145)
• The data will remain in the card until the setting is changed.
•With the P-330N/P-330 printer, pictures with a frame number greater
than 256 cannot be printed.
• It may take a while to store data in the card.
1
6
543
2
SHQ
32
[2/2]
OFF
ON
CARD
INDEX
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

144
DATE-PRINT (CARD)
You can store data for printing the date with pictures. (p. 140)
Set the Mode dial to , and
display a still picture.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select .
• To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
TIME or DATE.
Press the left arrow on the
Jog dial to confirm the setting.
Press the OK button to save
the setting and cancel the
Menu.
• Make sure to press the OK
button while is displayed
on the LCD monitor.
6
5
4
3
2
1
Note:
• Set the date beforehand.
• Pictures taken after this function is selected will not be printed.
•Unless OFF is selected in All Reset, the setting will be canceled when
the power is turned off. (p. 172)
•When using the P-330N/P-330 printer, Date-Print must be set on the
printer.
•It may take a while to store data in the card.
1
6
543
2
SHQ
32
[2/2]
CARD
INDEX
OFF
TIME
DATE
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

145
INDEX-PRINT (CARD)
You can store data for making index prints. (p. 140)
Set the Mode dial to , and
display a still picture.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select CARD
INDEX.
• To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
ON.
Press the left arrow on the
Jog dial to confirm the setting.
Press the OK button to save
the setting and cancel the
Menu.
• Make sure to press the OK
button while CARD INDEX is
displayed on the LCD monitor.
6
5
4
3
2
1
Note:
• The print format varies depending on the printer or lab used.
• Pictures taken after this function is selected will not be printed.
•Unless OFF is selected in All Reset, the setting will be canceled when
the power is turned off. (p. 172)
•When using the P-330N/P-330 printer, Index-Print must be set on the
printer.
•It may take a while to store data in the card.
1
6
543
2
SHQ
32
[2/2]
CARD
INDEX
OFF
ON
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

146
DIRECT-PRINT
PRINTING WITH THE P-300
By connecting the camera to the P-300 printer with the direct connect
cable, pictures can be printed directly from the camera.
Make sure that the power of the printer and the camera are off before
connecting.
Remove the lens cap.
Connect the computer connector of the camera to the serial
port of the printer with the provided RS-232C cable and
conversion connector for Mac. Turn on the printer.
2
1
Serial port
Computer connector
P-300

147
Set the Mode dial to to
turn on the LCD monitor.
Select the picture you want to
print using the Jog dial.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button on the printer to start
printing.
5
4
3
Note:
•The power of the printer and the camera must be OFF in order to be
connected.
•If the printer does not start printing when the DIRECT PRINT button is
pressed, turn off the printer, connect the cables correctly, turn on the
printer and press the DIRECT PRINT button again.
•The LCD monitor display goes off during printing, and other operations
are disabled.
• The date can be printed as well. (p. 156)
• The use of the optional AC adapter is recommended.
• Images taken in TIFF (non-compression) cannot be printed.
3
4
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

148
INDEX PRINT (P-300)
Index prints can be made.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Select the Index-Display
mode. (p. 95)
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
• After printing, the display
advances to the next group of
index pictures.
• The date will be always printed
in Index Print. Set the date
beforehand.
3
2
1
1
49 50 51
52 53 54
55 56 57
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

149
CLOSE-UP PRINT (P-300)
You can print enlarged images.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Select the Close-Up display
mode. (p. 96)
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
3
2
1
Note:
•Use of HQ/SHQ recording modes is recommended for high image
quality.
1
SQ
2.5x
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

150
RANDOM PRINT (P-300)
You can select a series of pictures to be direct-printed to the P-300
printer.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Display the picture you want
to print, then press the
Shutter release button.
•appears on the LCD
monitor.
•To cancel, press the Shutter
release button again.
Repeat until all the selections
are made.
With each press of the right
arrow on the Jog dial, you can
view the succeeding picture.
With each press of the left
arrow, you can view the
preceding picture.
[10-frame jump using the Jog dial]
•With each press of the bottom
arrow, you can view the picture 10
frames ahead.
•With each press of the top arrow,
you can view the picture 10 frames
behind.
3
2
1
1
3
2
’99.12.23 21:56 32
HQ
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

151
Note:
•This mode is available only when the camera is connected to the P-300
printer.
•The selection data will remain even after printing, but will be erased
when the Mode dial is switched.
• To cancel all the selections, select in All print. (p. 153)
•Selections can also be made from the Index-Display screen, but you
must return to the regular 1-frame display to make prints.
• The use of the optional AC adapter is recommended.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
4

152
Monitor display Use
For printing all the pictures in the card. (p. 153)
For making 4-cut prints. (p. 154)
For making 16-cut prints. (p. 154)
For making mirror-image prints. (p. 155)
For printing the date with pictures. (p. 156)
➠
➠
➠ ➠ ➠
DIRECT PRINT MENU
* When the Mode dial is set to and the camera is connected to a P-
300 printer. (p. 39)

153
ALL PRINT (P-300)
You can print all the pictures in the card using the P-300 printer.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select .
•To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
ON.
•If the OK button is pressed
here, the setting will be saved
and the Menu will be canceled.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
5
4
3
2
1
Note:
• Select to cancel All print as well as the selections made in Random
print. (p. 150)
• The use of the optional AC adapter is recommended.
1
43
2
SHQ
32
ON
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

154
CUT PRINT (P-300)
You can make 4/16-cut prints using the P-300 printer.
• In order to make sticker prints, the specialty paper must be set in the P-
300 printer’s paper feeder.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Display the picture you want
to print.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select or
.
•To cancel, press the Menu
button.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
5
4
3
2
1
Note:
• The adjustment will be canceled when the Menu mode is canceled.
• Date print is not available in the 4/16-cut print modes.
•Since the file size is reduced to make cut prints, the image quality may
be affected.
1
4
3
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L
SHQ
32
OFF

155
MIRROR PRINT (P-300)
You can make mirror-image prints using the P-300 printer.
This mode is especially useful for making T-shirt prints.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Display the picture you want
to print.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select .
•To cancel, press the Menu
button.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
5
4
3
2
1
1
4
3
SHQ
32
OFF
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

156
DATE PRINT (P-300)
You can print the date with pictures using the P-300 printer.
Connect the camera to the
printer, then set the Mode dial
to .
• See page 146 for connection to
the printer.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select .
•To cancel, press the Menu
button.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
ON.
•If the OK button is pressed
here, the setting will be saved
and the Menu will be canceled.
Enter the number of copies to
be printed on the printer, then
press the DIRECT PRINT
button to start printing.
5
4
3
2
1
Note:
• Set the date beforehand. (p. 30)
• Date print is not available in the 4/16-cut print modes.
1
43
2
SHQ
32
OFF
ON
P
A/S/M
OFF
P
O
W
E
R
/
M
O
D
E
D
I
A
L

5
USING A
PERSONAL
COMPUTER
OLYMPUS DIGITAL CAMERA

158
COMPUTER SYSTEM REQUIREMENTS
When using the provided utility software:
Personal computers used with this camera must conform to the following
minimum standards.
●IBM PC/AT compatible
Windows 98/95/NT4.0 : Pentium or later
CD-ROM drive
16MB RAM
45MB available HD space
Standard RS-232C interface
D-SUB 9-pin connector
Monitor with 256 colors
640 x 480 screen resolution
●Apple Macintosh
PowerPC 601 or later
Mac OS 7.6.1 ~ 8.6
CD-ROM drive
24MB RAM
45MB available HD space
Mac standard serial port
Monitor with 256 colors
640 x 480 screen resolution
* The iMac cannot be used.