Omcan RS-CN-0200 User manual

Revised - 12/31/2018
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Refrigerated Showcase
Model RS-CN-0200
Item 31809
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 5
--------------------------------------------------------------------------------------- 6 - 7
----------------------------------------------------------------------------------------- 7 - 8
----------------------------------------------------------------------------------------- 8
------------------------------------------------------------------------------------- 9
---------------------------------------------------------------------------- 10 - 12
---------------------------------------------------------------------------- 13
------------------------------------------------------------------------------------------------ 14
---------------------------------------------------------------------------- 15
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model RS-CN-0200

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.

5
Technical Specications
Model RS-CN-0200
Coolant R404a
General Rated Input Power 1280W
Power Running of Electrical Heating
Element 450W
Max. Ambient Temp. / RH <27ºC / 70%
Refrigeration Temperature 2 - 10ºC / 35.6 - 50ºF
Rated Voltage 110V
Rated Frequency 60Hz
Rated Current 11.7 A
Type of Climate 6
Foaming Agent XPS
Net Weight 253.5 lbs. / 115 kgs.
Lamp Power 2.8*3W (LED)
Total Effective Volume 200 L / 7.1 cu. ft.
Overall Dimensions (L x W x H) 40” x 25” x 50” / 1000 x 635 x 1250mm
Item Number 31809
Safety and Warranty
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6
Installation
HANDLE AND ASSEMBLING
Handle with care
Unplug wall socket before moving. Never tilt the refrigerator over 45 degrees during handling.
Storage
Always store refrigerator in a dry place.
Sufcient space
To allow for proper air circulation and increased refrigeration capabilities, the refrigerator must have
at least 3 inches of space between wall and unit.
Proper ventilation
Always place the refrigerator in an area with good ventilation. For rst time use, wait at least 2
hours before plugging into wall socket.
Away from heat source
Never place the refrigerator near any type of heat source or in direct sunlight, as it reduces
refrigeration capabilities.
No heavy load
Never put heavy items on top of the refrigerator.
No alterations/tampering
Never tamper with, or make changes to the refrigerator. Changes and add-ons should not be
installed to the inside or outside of the refrigerator.
Stable location
Unpack and place the refrigerator on at, solid ground.
PREPARATION AND POWER SUPPLY
Exclusive power socket
Power supply should be 110V, single phase AC with exclusive single
phase three pin outlet and fuse (8A). The power outlet must be in
close proximity to the ground.
Power receptacle
Earth bar
Ground

7
Installation
No shared power outlets
Refrigerator cable should never share the power outlet with any other appliance, as cable
will overheat and may result in a re.
Protect cables
Extra caution should be used when handling cables, as broken or damaged cables can
cause sparking and may result in a re.
No water ushing
Never ush the refrigerator surface. This can cause leakage, which may result in electrical
damage or re.
Never store ammables and explosives
No explosives or ammables should be stored in, or in proximity to, the refrigerator, such
as gasoline, alcohol, and adhesives.
No spray
Never spray ammables such as paint or coating near the refrigerator. This may cause re
or malfunction.
After power outage
After a power outage or the unplugging of the refrigerator, wait at least 5 minutes before
plugging it back in.
No medicine
Medicine should not be stored inside of the refrigerator.
Operation
USE AND CAUTION
Before use:
• Plug refrigerator into the 110V exclusive socket.
• After the refrigerator is running, conrm that air suction/ltration is in order and that it is sufciently cold.
After checking to make sure the refrigerator is working properly, it may be used.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

8
Operation
Maintenance
1. Cabinet Cleaning: The product should be cleaned once a week with power supply disconnected. In
cleaning, please use mild-rinsing water or non-corrosive products. Do not wash directly with water faucet.
2. De-Dusting for Condenser: The condenser should be cleaned every three months with power supply
disconnected. To clean condenser, remove rear metal cover and get rid of any dust found on the cooling n
of the condenser using a wire brush or high-pressure air gun.
3. Leak Check: Observe all connectors and welding joints for oil stain, which indicates a need for patching
work, which can be done by professionals.
4. Frequently observe the operation of the product. In case of any abnormal noise or smell, cut off the power
supply immediately and call professionals. Do not restart the product before source of trouble is found.
5. We will not be responsible for any accidents acquired through failure to follow previous notices.
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The operation manual is not suitable for the persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge.
DIGITAL TEMPERATURE CONTROLLER
Features Of Function
Small, integrated digital controller, which is applicable to the compressor of 1 HP.
Main functions are: Temperature Display/Temperature Control/Manual-Automatic Defrost bt burning off/Lighting
Control/Value Storing/Self-Testing/Parameter Locking.
Front Panel Operation
1. Set temperature: Press “SET” button; set temperature will be displayed. Press or button to modify
and store the displayed value. Press “SET” button to exit the adjustment and display the cold-room
temperature.
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Lighting: Press button to activate light in refrigerator; press again to turn off.
4. Manual start/stop defrost: Press button and hold for 6 seconds to either defrost or to stop defrost.
5. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is off. During delay start, the LED ashes.
6. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of
defrost, the LED ashes.

9
Troubleshooting
Troubles Causes Solutions
Unusual noise under the bottom
shelf.
Fan blade broken. Power off and x the blade.
Non-refrigerating in spite of normal
operation.
Unit off. Power on.
Melting process. Stop melting.
Refrigerant leaking. Patch the leak and rell refrigerant.
Unit failure. Call for professionals.
Weak air from air curtain, and
higher cabinet temperature.
Evaporator blocked by frost. Increase melting frequency.
Inside fan damaged. Replace the fan.
Too low set point of temperature
controller.
Adjust the set point.
Vent blocked by storage. Remove the storage.
Normal air curtain, but higher
cabinet temperature.
Insufcient refrigerant. Rell the refrigerant.
Too high set point of temperature
controllers.
Adjust the set point for the
temperature controller.
The wind curtain disturbed by
strong air ow.
Removing the disturbing factors.
Ambient temperature or humidity
beyond standards.
Improve the conditions.
Melting water overown. Heating pipe for melting water
damaged.
Replace the heating pipe.
Water-level controller failure. Replace the water-level controller.
Ambient temperature or humidity
beyond standards.
Improve the conditions.
Normal air curtain, but periodical
uctuation of cabinet temperature.
Condenser contaminated. Clean the condenser.
Poor venting of the unit. Improve the venting conditions.
Heat protection of compressor
failure.
Replace the heat protection.
Capillary is blocked by ice. Replace the drying lter.
Temperature controller failure. Replace the temperature controller.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
31809 RS-CN-0200 Refrigerated Showcase 200 L / 7.1 cu ft
110V/60/1 CE cQPSus RTS-200L

10
Parts Breakdown
Model RS-CN-0200 31809

11
Parts Breakdown
Model RS-CN-0200 31809

12
Parts Breakdown
Model RS-CN-0200 31809
Item No. Description Position Item No. Description Position Item No. Description Position
68535 Power Cord for RTS-200L 1 68557 Bottom Shelf for RTS-200L 32 68585 Wind Deector for RTS-200L 63
66309 Dry Filter for RTS-200L 2 79322 Left Shelf Bracket for RTS-200L 33 68586 Left Board of Motor Bracket for RTS-
200L 64
68536 Accumulator for RTS-200L 3 68558 Top Shelf for RTS-200L 34 70662 Cabinet Frame for RTS-200L 65
60143 Filling Pipe for RTS-200L 4 68559 Left Glass for RTS-200L 35 68587 Waterproof Plug for RTS-200L 66
68537 Base Board for RTS-200L 5 68560 Left Rear Pillar for RTS-200L 36 68588 Waterproof Plug for RTS-200L 66
68538 Left Bottom Base Panel for RTS-200L 6 68561 Pole for Shelf for RTS-200L 37 68589 LED Socket Bracket for RTS-200L 67
68539 Components of the Water Box for
RTS-200L 7 68562 Reinforcement for Top Left Pillar for RTS-200L 38 68590 Fan Blade of Evaporator for RTS-200L 68
66294 Compressor for RTS-200L 8 68563 Rear Body Board Foam for RTS-200L 39 71565 Fan Blade for RTS-200L 69
68540 Rear Cover of Base for RTS-200L 9 68564 Rear Body Board for RTS-200L 40 60682 Evaporator Fan Motor for RTS-200L 70
68541 Beam of Base for RTS-200L 10 68565 Top Left Pillar for RTS-200L 41 71564 Fan Guard for RTS-200L 71
68542 Connecting Pipe 1 for RTS-200L 11 68566 Left Bracket of Front Board for RTS-200L 42 68591 LED Lamp for RTS-200L 72
68452 Connection Pipe for RTS-200L 12 68567 Inside Top Board for RTS-200L 43 68592 Handle for RTS-200L 73
68543 Shelf of Base for RTS-200L 13 68568 Top Cover Foam for RTS-200L 44 68593 Evaporator Front Foam for RTS-200L 74
68544 Wire Ring for RTS-200L 14 68569 Perforated Plate for RTS-200L 45 68594 Handle Stiffener for RTS-200L 75
68545 Water Chute of Left Glass for RTS-200L 15 68570 Top Cover for RTS-200L 46 68595 Front Top Base Panel for RTS-200L 76
68546 Water Chute of Right Glass for RTS-200L 16 68571 Front Board of Top Cover for RTS-200L 47 68596 Condenser for RTS-200L 77
68547 Side Front Foam of the Evaporator for
RTS-200L 17 68572 Curtain for RTS-200L 48 79365 Fan Guard for RTS-200L 78
68548 Side Rear Foam of the Evaporator for
RTS-200L 18 68573 Insulating Foam for RTS-200L 49 70111 Evaporator Motor for RTS-200L 79
68549 Insulating Foam for RTS-200L 19 68574 Front Board of Curtain for RTS-200L 50 79366 Fan Blade for RTS-200L 80
68550 Plastic Base of Evaporator for RTS-200L 20 68575 Top Right Pillar for RTS-200L 51 68597 Right Bottom Base Panel for RTS-200L 81
63459 Hose Fitting for RTS-200L 21 68576 Left Bracket of Front Board for RTS-200L 52 68598 Front Bottom Base Panel for RTS-200L 82
68551 Circlip for RTS-200L 22 68577 Right Glass for RTS-200L 53 68599 Bottom Cover of Set-Up Box for
Mainboard for RTS-200L 83
68552 Bush for RTS-200L 23 68578 Reinforcement for Top Right Pillar for
RTS-200L 54 68600 Mainboard for RTS-200L 84
68553 Plastic Base for Evaporator for RTS-200L 24 79336 Right Shelf Bracket for RTS-200L 55 68601 Top Cover of Set-Up Box for Mainboard
for RTS-200L 85
68554 Evaporator for RTS-200L 25 68579 Right Rear Pillar for RTS-200L 56 68602 Control Box Bracket for RTS-200L 86
68555 Decorative Cover of Screw Nut for
RTS-200L 26 68580 Ventilated Board for RTS-200L 57 68603 Power Clip for RTS-200L 87
79312 Nut Decoration for RTS-200L 27 71655 Right Shelf Bracket for RTS-200L 58 68604 Switch of LED Lamp for RTS-200L 88
79313 Nut Gasket for RTS-200L 28 68581 Label Board for RTS-200L 59 60116 Cover of Cable Clip for RTS-200L 89
79314 Decoration Nut Gasket for RTS-200L 29 68582 Top Cover of Base for RTS-200L 60 60117 Base of Cable Clip for RTS-200L 90
68556 Left Top Base Panel for RTS-200L 30 68583 Evaporator Bracket for RTS-200L 61 60562 Front Wheels for RTS-200L 91
71654 Left Shelf Bracket for RTS-200L 31 68584 Right Top Base Panel for RTS-200L 62 60561 Rear Wheels for RTS-200L 92

13
Electrical Schematics
Model RS-CN-0200 31809

14
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

15
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.