Omega OF6061WZ User manual

OPERATING AND INSTALLATION
INSTRUCTIONS OF
omegaappliances.com.au .Always serves you well.
OF6061WZ

Dear Customer,
We take offering quality products more than your expectation as a
goal, offers you the products produced in modern facilities carefully
and particularly tested for quality.
This manual is prepared in order to help you to use your appliance
that is manufactured by the most recent technology, with
confidence and maximum efficiency.
Before using your appliance, carefully read this guide that includes
the basic information for right and safe installation,maintenance
and use and contact to the nearest Authorized Service for
mounting of your product.

CONTENTS :
1. PRESENTATION AND SIZES OF PRODUCT
2. WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
4. USE OF YOUR OVEN
5. CLEANING AND MAINTENANCE
6. SERVICE AND TRANSPORT

PART 1 : PRESENTATION AND SIZES OF PRODUCT
Part of List :
1- Cooktop Cover
2- Cooktop
3- Control Panel
4- Oven Door Handle
5- Drawer Cover
6- Supply Leg
7- Oven Door
8- Oven Tray
9- Wire Grid
10- Front Resistance
11- Fan Store
12- Oven Lamp
13- Hotplate
14- Highlite element
1011
12
13
14
3
5
8
9
:;
<
MODEL SIZE(cm)
YE/TE 66
YE/TE 56
60*60*85 60*60*90
50*60*85 50*60*90
YE/TE 5550*50*85 50*50*90

PART 2 : WARNINGS
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING
YOUR APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE
WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR
APPLIANCE MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN
THIS MANUAL. PAY ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES,
WHILE YOU ARE READING THE OPERATING MANUAL.
General Safety Warnings The appliance is not intended
for use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervised or instruction concerning use of
the appliance by a responsible person for their
safely.Young children should be supervised
to ensure that they do not play with the
appliance.
WARNING: The appliance and its accessible
parts become hot during use. Care should be
taken to avoid touching heating elements.

WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in
fire. NEVER try to extinguish a fire with water,
but switch off the appliance and then cover
flame e.g. with a lid or a fire blanket.
WARNING: Danger of fire: do not store items on
the cooking surfaces.
WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock.
The appliance is not intended to be operated by
means of an external timer or separate remote-
control system.

WARNING:In order to prevent tipping of the
appliance, the stabilizing brackets must be
installed. (For detail information please read the
anti-tilting kit set guide.)
During use, the appliance becomes hot. Care
should be taken to avoid touching heating
elements inside the oven.
Do not use steam cleaners for cleaning the
appliance.
WARNING: Ensure that the appliance is
switched off before replacing the lamp to avoid
the possibility of electric shock.

CAUTION: Accessible parts may be hot when
the cooking or grilling is in use. Young children
should be kept away.
Your appliance is produced in accordance with all applicable local and international
standards and regulations.
Maintenance and repair work must be made only by authorized service technicians.
Installation and repair work that is carried out by unauthorized technicians may endanger
you. It is dangerous to alter or modify the specifications of the appliance in any way.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure or electricity voltage and frequency) and the adjustments of the appliance are
compatible. The adjustment conditions for this appliance are stated on the label.
CAUTION: This appliance is designed only for cooking food and is intended for indoor
domestic household use only and should not be used for any other purpose or in any other
application, such as for non-domestic use or in a commercial environment or room heating.
All possible security measures have been taken to ensure your safety. Since the glass may
break, you should be careful while cleaning to avoid scratching. Avoid hitting or knocking on
the glass with accessories.
Ensure that the supply cord is not wedged during the installation. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to prevent a hazard.
While the oven door is open, do not let children climb on the door or sit on it.
Installation Warnings
Do not operate the appliance before it is fully installed.
The appliance must be installed by an authorized technician and put into use. The producer
is not responsible for any damage that might be caused by defective placement and
installation by unauthorized people.
When you unpack the appliance, make sure that it is not damaged during transportation. In
case of any defect; do not use the appliance and contact to the authorized maintenance
service immediately. As the materials used for packaging (nylon, staplers, styrofoam...etc)
may cause harmful effects to children, they should be collected and removed immediately.
Protect your appliance against atmospheric effects. Do not expose it to effects such as sun,
rain, snow etc.

The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.
During usage
When you first run your oven a certain smell will emanate from the insulation materials and
the heater elements. For this reason, before using your oven, run it empty at maximum
temperature for 45 minutes. At the same time you need to properly ventilate the environment
in which the product is installed.
During usage, the outer and inner surfaces of the oven get hot. While opening the oven
door, step back to avoid the hot steam coming out of the oven. There may be a risk of burns.
Do not put flammable or combustible materials, in or near the appliance when it is operating.
Always use oven gloves to remove and replace food in the oven.
Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on
condition of extreme heating. Never pour water on to flames that are caused by oil. Cover
the saucepan or frypan with its cover in order to choke the flame that has occured in this
case and turn the cooker off.
Always position pans over the centre of the cooking zone, and turn the handles to a safe
position so they cannot be knocked or grabbed.
If you will not use the appliance for a long time, plug it off. Keep the main control switch off.
Also when you do not use the appliance, keep the gas valve off.
Make sure the appliance control knobs are always in the "0" (stop) position when it is not
used.
The trays incline when pulled out. Be careful not to let hot liquid spill over.
When the door or drawer of the oven is open, do not leave anything on it. You may
unbalance your appliance or break the cover.
Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper,
cloth...etc) into the drawer. This includes cookware with plastic accessories (e.g. handles).
Do not hang towels, dishcloths or clothes from the appliance or its handles.
During cleaning and maintenance
Always turn the appliance off before operations such as cleaning or maintenance. You can
do it after plugging the appliance off or turning the main switches off.
Do not remove the control knobs to clean the control panel.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE
RECOMMEND YOU ALWAYS TO USE THE ORIGINAL SPARE PARTS AND TO CALL
ONLY OUR AUTHORIZED SERVICES IN CASE OF NEED.
Contact to Authorized Service for mounting of your oven.
3. 1 INSTALLATION OF OVEN
There are some factors that must be paid attention to while installing your oven.
Surely pay attention to our below suggestions in order to be able to prevent any
problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the oven
is set up, the furniture's height must not exceed the height of the cooker panel.
Pay attention not to place it near the refrigerator, there must be no flammable or
in flammable materials such as curtain, waterproof cloth etc. that will begin to burn
quickly, while selecting place for oven.
It is required there must be at least 2 cm blank space between the back cover of
oven and wall for air circulation.
The furniture close to oven must be manufactured resistant to heat more than
50 C° of the room temperature.
If the kitchen furniture are higher than the pan which the oven's cookers are on,
it must be at least 11 cm away from the oven's side.
The minimum heights from the oven's pan and wall cupboards and paddle boxes
with fan over the oven, are shown as below. Thus, the paddle box must be at
minimum 650 mm height from the cooker pan.
If there is no paddle box, this height must not be less than 700 mm.
This appliance must only be installed directly on the floor and not on a base.
If this appliances is installed on a base, measures must be taken to prevent the
appliance from slipping from the base

3.3 ELECTRIC CONNECTION AND SECURITY
During the electric connection, surely follow the instructions below.
The earthing cable must be connected to the terminal. You have to ensure the
cable with insulation to be connected to the power source during the connection of
cable. If there is not any appropriate earthed electric outlet in accordance with
regulations in the place where the appliance will be installed, immediately contact to
our authorized service.
The earthed electric outlet must be close to the appliance. Surely do not use the
extension cord.
The supply cable must not touch to the hot surface of the product.
In case the supply cable is damaged, surely contact to Qualified Service. The
cable must be changed by the authorized service.
The wrong electric connection may damage your appliance. Such damage is not
in guarantee extent.
The appliance is adjusted as appropriate for 220-240 Volts and 380-415V 3N Volts
of electricity. If the network electricity is different than this informed value, immediately
contact to our authorized service.
The electric cable must not touch to the hot parts of appliance. The electric cable
must not touch the back part of the appliance. Otherwise the electric cable of
appliance may be damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibility against any kind of damages
and losses that emanate from the following security norms.
Provide a means of disconnection from the supply having an air gap contact separation
of at least 3mm in all active (phase) conductors. Such means of disconnection shall be
incorporated in the fixed wiring according to the wiring rules.
The appliance is provided for fixed connection to the power supply. The connection
of the appliance to an electrical source must be done by authorized technician.
For fixed connection, use the H05VV, H05V2V2 or H05RR type supply cord.
For fixed connection, use 3x2,5mm2 or 3x4mm2 sized cable according to appliances
power and terminal box label.
Some appliances can be equipped with special plug (Perilex or Norplug). If it is
necessary, change it with the same specified spare part.
Use 16A/400V 5 pin for perilex plug and 25A/250V for Norplug.
These plugs can be used only in some countries.
If the electrical supply is restricted, means of all-pole disconnection must be accessible
and incorporated in the fixed wiring in accordance with the wiring rules.

Product Power
5000-10600W
5000-8600W
5000-9500W
>=8600W
>=9000W
>=9500W
5000-9000W
Voltage Supply Cable
380/400/415V
220V
220V
230V
230V
240V
240V
5X1,5 mm²
3X2,5 mm²
3X4 mm²
3X2,5 mm²
3X4 mm²
3X2,5 mm²
3X4 mm²

3. 4 GENERAL WARNINGS AND MEASURES
Your appliance is produced in accordance with the related security instructions
connected with electrical appliance. The maintenance and repair works must be
made just by the authorized service technician who is trained by the producer firm.
The installation and repair works whitout following rules may endanger you.
Its outside surfaces heat while your appliance operates. The interior surfaces of
oven, components that ensures the heat and steam that goes out are quite hot. Even
if the appliance is turned off, these parts hold its heat for a specific time. Do not touch
onto the hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming
up on condition of extreme heating. Never pour water to the flames occuring from oil.
Cover the saucepan or frypan with its cover in order to choke the flame that was
occured in this case and turn the cooker off.
The oven and heat adjustment switches must be adjusted and oven's clock must
be programmed for cooking in your oven. Otherwise the oven does not operate.
Do not leave anything on it when the door or drawer of oven is open. You may
unbalance your appliance or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper,
cloth etc.) into the lower drawer.
Plug it off when you do not use the appliance.
Protect your appliance against atmospheric effects. Do not leave it to effects
such as sun, rain, snow, powder etc.
* This appliance must be earthed.
* For this connection a power lead of wire type
H05VV -F should be used.
2
2
2
2
2
2

4.1 GENERAL APPEARENCE AND TECHNICAL FEATURES OF
LOWER HEATER
UPPER HEATER
YE 56
TURBO HEATER
GRILL
1000 WATT
1000 WATT
1600 WATT
2000 WATT
4.2 PRESENTATION AND FEATURES OF THE CONTROL P
YE 56/66
Left Back Heater Left Front Heater
Oven Function
Switch Oven
Thermostat
Switch
Mecanic Timer Right
Front Heater Right Back Heater
4.3 USE OF HOTPLATES
The electrical cooker is commanded by 7 graded switches. "0" of the grades is off
location. The use fields in response to other 6 grades are below.
Hotplates
1...... .....Keeping hot location
2-3.....Heating locations at low heat
4-5-6..Cooking - roasting and
boiling locations

The upper part of hotplates is covered by a protective material resistant to heat. Turn the
switch of the electrical cooker to "3" and then operate the cooker for 5 minutes in order to
burn and so to toughen the protective layer at first use.
During use of electrical cookers, it is required to pay attention to the used saucepans to have
smooth bases. If appropriate sized and smooth based saucepans are used, you can get the
most efficiency from your cooker. It is not suggested to use the little size saucepans on the
big size cooker, because this will cause heat loss and so energy will be wasted.
RIGHT WRONG
circular saucepan base WRONG
small saucepan diameter
WRONG
saucepan’s base had not settled
Surely control that your cooker is off, the control switch is at "0" location after cooking.
Also never touch it as the cooker will be hot for a speific time after it was turned off.
Do not let children to come close to it.
Clean the electrical cooker with a wet cloth after using the electrical cooker. If there is
excessively getting dirty situation, you can clean it with water with detergent rather well.
Heat for a few minutes for the upper part to dry after cleaning. If you will not use its
upper part for a while, ensure to occur a thin oil layer as oiling with machine oil.

4.4.2 Use of Mechanical Timer
When you set the timer
knob to "M" position as
seen in the illustration on
left side, the oven can be
operated continuously.
The oven can never be
operated, when the timer
knob is in "0" position.
Turn the timer knob in
clockwise direction in
order to set time
between 0-100 minutes
as seen in figure on
right side. When the
adjusted time ends,
oven is turned off and a
single warning sound is
heard.
Operation with time setManual Operation
30
40
10
20
50
70
80
90
60
100
M
30
40
10
20
30
40
50
70
80
90
60
100
M

Oven Lamp
Static Cooking Function
Only the oven light will be turned on and it remains on in all the cooking functions.
The oven lights will be turned on, the lower and upper heating
elements will start operating.
The static cooking function emits heat, ensuring even cooking of the lower and upper food. This is
ideal for making pastries, cakes, baked pasta, lasagne and pizza. Prehating the oven for 10 minutes
is recommended and it is best to cook on only one shelf at a time in this function.
's thermostat and warning
Defrost Function
The oven lights will be turned on, the fan starts operating.
To use the defrost function, take your frozen food and place it in the oven on a shelf placed in the
third slot from the bottom. It is recommended that you can place an oven tray under the
defrosting food, to catch the water accumulated due to melting ice. This function will not cook or
bake your food, it will only help to defrost it.
's warning
Grilling Function
Fan Function
The oven lights will be turned on, the grill heating element will start
operating.
The function is used for grilling and toasting foods, use the upper shelves of oven. Lightly brush
the wire grid with oil to stop foods sticking and place foods in the center of the grid. Always place
a tray beneath to catch any drips of oil or fat. It is recommended to pre-heat the oven about 10
minutes.
Warning: When grilling, the oven door must be closed and the oven temperature should be
0
adjusted to 190 C.
's thermostat and warning
The oven lights will be turned on, the upper and lower heating
elements and fan will start operating.
This function is very good for obtaining results in baking pastry. Cooking is carried out by the lower
and upper heating element within the oven and by the fan providing air circulation, which will
give a slight grill effect to the food. It is recommended to pre-heat the oven about 10 minutes.
's thermostat and warning
4. 4. 3 Use of Oven Function Switches
This switch allows you to select the oven functions. The functions and their grades
are shown at the following table. Also, the detailed instructions and their uses will
also be explained in details in the next pages.

Faster Grilling Function
The oven lights will be turned on, the grill and upper heating
elements will start operating.
The function is used for faster grilling and for covering a larger surface area, such as grilling meats,
use the upper shelves of oven. Lightly brush the wire grid with oil to stop foods sticking and place
foods in the center of the grid. Always place a tray beneath to catch any drips of oil or fat. It is
recommended to pre-heat the oven about 10 minutes.
Warning: When grilling, the oven door must be closed and the oven temperature should be
0
adjusted to 190 C.
's thermostat and warning
Lower Heating and Fan Function
The oven lights will be turned on, the lower heating element and fan
will start operating.
The lower heating and fan function is ideal for heating foods equally in a short time. It is
recommended to pre-heat the oven about 10 minutes.
's thermostat and warning
Double Grill - Fan and Roasting Chicken Function
The oven lights will be turned on, the grill and upper heating
elements, fan and turnspit will start operating.
The function is used for faster grilling of thicker foods, for covering a larger surface area and
roasting chicken with the roasting skewer. Both the upper heating elements and grill will be
energised along with the fan to ensure even cooking. For grilling; use the upper shelves of oven.
Lightly brush the wire grid with oil to stop foods sticking and place foods in the center of the grid.
Always place a tray beneath to catch any drips of oil or fat. For roasting chicken; please look at the
oven accessories part. It is recommended to pre-heat the oven about 10 minutes.
Warning: When grilling, the oven door must be closed and the oven temperature should be
0
adjusted to 190 C.
's thermostat and warning

Energy Saving
- During use of electrical cookers , it is required to use saucepans having flat bases.
- Choose a cookware of proper size .
- Using a lid will reduce cooking times.
- Minimise the amount of liquid or fat to reduce cooking times.
- When liquid starts boling ,reduce the temperature setting.
- Oven door should not be opened often during cooking period.
4. 4. 4 Accessories Used in Oven
You can use glass dishes, cake molds, special oven trays that are appropriate for use
in oven, that you are able to assure in market, apart from the oven trays and grill wire
chicken roasting skewer that are given together with your oven. Pay attention to the
information related to the subject that were given by the manufacturer firm.
In case small size dishes are used, place the dish onto the grill wire, as it will
completely be on the middle part of the wire. The following information must also be
followed for the enameled dishes.
If the food that will be cooked does not cover the oven tray completely, if the food is
taken from the deep freezer or the tray is being used for collection of food's juices
that
flow during grilling, the form changes can be observed in tray because of the high
heat that occur during cooking or roasting.
The tray will return to its old form only when the tray cooled after cooking. This is a
normal physical event that occurs during heat transfer.
Do not leave this tray or dish in cold environment right away after cooking in glass
tray
or dish. Do not put onto the cold and wet grounds. Place on a dry kitchen cloth or dish
cross, ensure it to cools slowly. Otherwise the glass tray or dish may be broken.
If you will grill in your oven; we recommend you to use the grill that was given in tray
together with product. ( If your product includes this material ) So, the oils that spatter
and flow, will not dirty the inside of oven. If you will use the big wire grill; put a tray
onto
one of the lower shelves for oils not to be collected. Also put some water into it for
cleaning easiness.
Use 4th and 5th shelves while grilling and oil the grill for the ingredients that you will
grill not to stick to the grill.

5. Rack
4. Rack
3. Rack
2. Rack
1. Rack
WARNING- Fit
the grid correctly
into any
correspondent
rack in the oven
cavity and push it
to the end.