Omegalink OL-AL(RS)-CH5-EN User manual

NOTICE: The manufacturer will accept no responsibility for any electrical damage resulting from
improper installation of this product, be that either damage to the vehicle itself or to the installed
device. This device must be installed by a certified technician. This guide has been written for
properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please
reviewtheInstallation Guide carefullybefore beginning any work.
!
PLEASE VISIT www.CARALARM.COM FOR COMPLETE PRODUCT DETAILS
Omega R&D Inc.
INSTALL GUIDE
OL-AL(RS)-CH5-EN
AvAiLAbLE fOR: OL-MDb-ALL
CH5
The brand names and logos found in this guide are property of their respective owners. Omega R&D Inc. © 2013
Rev. Date: February 13, 2013
Doc. No.: ##10844##
20130212

MAKE MODEL YEAR INSTALL TYPE
FEATURES
DATA IMMOBILIZER BYPASS DOWNLOADABLE SOFTWARE RS232 COMMUNICATION 2-WAY COMPATIBILITY PRIORITY UNLOCK DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM TRUNK/HATCH RELEASE DATA/MUX STARTER CTRL RAP SHUTDOWN CTRL
CHRYSLER
200 11-13 3 or 4 • • • • • • • • • • • •
300 / 300C 05-07 1 • • • • • • • • • • • •
Aspen 07-10 3 or 4 • • • • • • • • • • • •
PT Cruiser 06-10 1 • • • • • • • • • • • •
Sebring 07-10 3 or 4 • • • • • • • • • • • •
DODGE
Avenger 08-13 3 or 4 • • • • • • • • • • • •
Caliber (with start wire) 07 1 • • • • • • • • • • • •
Caliber 07-12 3 or 4 • • • • • • • • • • • •
Charger 06-07 1 • • • • • • • • • • • •
Durango 07-10 3 or 4 • • • • • • • • • • • •
Magnum 05-07 1 • • • • • • • • • • • •
Nitro 07-11 3 or 4 • • • • • • • • • • •
Ram 1500 07-08 3 or 4 • • • • • • • • • • •
Ram 2500 07-09 3 or 4 • • • • • • • • • • •
Ram 3500 07-09 3 or 4 • • • • • • • • • • •
Ram 3500 chassis cab 07-09 3 or 4 • • • • • • • • • • •
Ram 4500 chassis cab 08-10 3 or 4 • • • • • • • • • • •
Ram 5500 chassis cab 08-10 3 or 4 • • • • • • • • • • •
JEEP
Commander 06-07 1 • • • • • • • • • • • •
Compas 07-13 3 or 4 • • • • • • • • • • • •
Grand Cherokee 05-07 1 • • • • • • • • • • • •
Liberty 08-12 3 or 4 • • • • • • • • • • •
Patriot 07-13 3 or 4 • • • • • • • • • • • •
Wrangler 07-13 3 or 4 • • • • • • • • • • •
RAM
4500 chassis cab 10 3 or 4 • • • • • • • • • • •
5500 chassis cab 10 3 or 4 • • • • • • • • • • •
INSTALL TYPE SELECTION
NOTE
I All install types require a T-Harness (sold separately),
except install type 3, to complete the installation.
Page 2 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

Page 3 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
1Complete the installation as
shown in the wiring diagram. 1Complete the installation as shown in the wiring diagram.
2Make the following connections
to control the positive parking
light (+).
3Follow the module programming
procedure.
2Make the following connections
to control the negative parking
light (-).
3Follow the module programming
procedure.
PARKING LIGHT NOTE
PARKING LIGHT (-) OUTPUT
RED
DOORLOCK INVERTER
DLPP3
DOORLOCK INVERTER
DLPP3
BLUE
(NC) GREEN
GREEN (NC)
BLUE
12V (+)
PARKING LIGHT (+)
86
30
87
87A
85
D/U +
D/L +
10 AMPS
PARKING LIGHT (-) OUTPUT
RED
BLUE
(NC) GREEN
GREEN (NC)
BLUE
12V (+)
PARKING LIGHT (-)
86
30
87
87A
85
D/U +
D/L +
WARNING
MAX 25mA
WARNING
MAX 25mA
5 AMPS
PARKING LIGHT (-) OUTPUT
RED
DOORLOCK INVERTER
DLPP3
DOORLOCK INVERTER
DLPP3
BLUE
(NC) GREEN
GREEN (NC)
BLUE
12V (+)
PARKING LIGHT (+)
86
30
87
87A
85
D/U +
D/L +
10 AMPS
PARKING LIGHT (-) OUTPUT
RED
BLUE
(NC) GREEN
GREEN (NC)
BLUE
12V (+)
PARKING LIGHT (-)
86
30
87
87A
85
D/U +
D/L +
WARNING
MAX 25mA
WARNING
MAX 25mA
5 AMPS
POSITIVE PARKING LIGHT (+) NEGATIVE PARKING LIGHT (-)
Doc. No.: ##10844##

TYPE 1 - WIRE CROSS REFERENCE CHART
MAKE MODEL YEAR WIRE DESCRIPTION
CONNECTOR
POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR NAME COLOR TYPE
CHRYSLER
300 05-07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/DkGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
PT Cruiser 06-10
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/LtBlue (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
DODGE
Caliber with
start wire 07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/DkGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Charger 06-07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/DkGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Magnum 05-07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/DkGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
JEEP
Commander 06-07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/Orange (+) Ignition switch ~
Parking Light ~ ~ ~ 85 ~ (-) Parking light relay, engine compartment. ~
Grand
Cherokee 05-07
Control C1 Black 5 pin 2 Violet/Brown (MUX) Ignition switch ~
Starter C1 Black 5 pin 4 Pink/Orange (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Page 4 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

TYPE 1 - WIRING DIAGRAM
Page 5 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
12345 24
DA
B
C
H
J
!
G
A
B
C
F
D
E
G
JH
E
OL-HRN CH5
BLUE/RED (NC)BLUE/RED (NC)
BLUE/YELLOW (NC)
BLUE/YELLOW (NC)
GREEN/RED (NC)
GREEN/RED (NC)
GREEN/YELLOW (NC)
GREEN/YELLOW (NC)
GRAY/RED (NC)
GRAY/RED (NC)
GRAY/YELLOW (NC)
GRAY/YELLOW (NC)
GREEN/REDGREEN/RED
PURPLE
PURPLE
CONTROL
START
REFER TO
ASSEMBLY FOR PROPER
CONNECTIONS AND MATCH
EACH LETTER ACCORDINGLY
ASSEMBLY
SOLD SEPARATELY
VEHICLE HARNESS
CUT AND INSULATE
THE PURPLE WIRE
(NEXT TO WHITE WIRE)
RF KIT SOLD SEPARATELY
SEE DISTRIBUTOR FOR
AVAILABLE MODELS
HOOD SWITCH (-) INPUT - GREEN/BLACK
(NC) RED/WHITE
(NC) BROWN
(NC) BROWN
(NC) PURPLE/YELLOW
(NC) PURPLE/YELLOW
(NC) PURPLE/BLACK
(NC) PURPLE/BLACK
(NC) WHITE
(NC) WHITE
(NC) BLACK/WHITE
(NC) PURPLE/WHITE
HOOD SWITCH
GREEN
READ:
PARKING LIGHT
NOTE
(NC) BLUE/BLACK
Doc. No.: ##10844##

TYPE 3 - WIRE CROSS REFERENCE CHART - 1 OF 2
MAKE MODEL YEAR WIRE DESCRIPTION
CONNECTOR
POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR NAME COLOR TYPE
CHRYSLER
200 11-13
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Aspen 07-10
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/Gray (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ Pink/Red (MUX) Switch ~
Sebring 07-10
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
DODGE
Avenger 08-13
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Caliber 07-12
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/Pink (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red/LtBlue (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Durango 07-10
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/LtBlue (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/Gray (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ Pink/Red (MUX) Switch ~
Nitro 07-11
CanH ~ ~ 8 pin 6 White/LtGreen (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple + White/Green (+) Driver kick panel ~
Page 6 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

TYPE 3 - WIRE CROSS REFERENCE CHART - 2 OF 2
MAKE MODEL YEAR WIRE DESCRIPTION
CONNECTOR
POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR NAME COLOR TYPE
DODGE
Ram Pickup 07-10
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Gray/Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Green (MUX) Switch ~
JEEP
Compass 07-13
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/Pink (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red/LtGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Liberty 08-12
CanH ~ ~ 8 pin 6 White/Black (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/Blue (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Patriot 07-13
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/Pink (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red/LtGreen (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple (+) Driver kick panel ~
Wrangler 07-13
CanH ~ ~ 8 pin 6 White/Black (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White/LtBlue (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Purple + White/Orange (+) Passenger kick pad ~
RAM
Pickup 10
CanH ~ ~ 8 pin 6 White/Orange (DATA) Ignition switch ~
CanL ~ ~ 8 pin 7 White (DATA) Ignition switch ~
Control ~ ~ 8 pin 1 Purple/Brown (MUX) Ignition switch ~
Ignition ~ ~ 8 pin 3 Pink/White (+) Ignition switch ~
12V ~ ~ 8 pin 5 Gray/Red (+) Ignition switch ~
Parking Light ~ ~ ~ ~ White/Green (MUX) Switch ~
Page 7 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

TYPE 3 - WIRING DIAGRAM
Page 8 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
12345678 5
6
73 1
7.5 AMPS
(NC)YELLOW/BLACK (NC)
BROWN/RED - CANH
BROWN/RED - CANH
BLUE/RED (NC)
BLUE/RED (NC)
(NC)
YELLOW/RED (NC)
YELLOW - CONTROL
YELLOW - CONTROL
BROWN/YELLOW - CANL
BROWN/YELLOW - CANL
ORANGE/BLACK (NC)
ORANGE/BLACK (NC)
ORANGE/WHITE (NC)
ORANGE/WHITE (NC)
(NC)
ORANGE (NC)
PINK/BLACK (NC)
PINK/BLACK (NC)
PINK - IGNITION (+) INPUT
PINK - IGNITION (+) INPUT
BLUE/YELLOW (NC)
BLUE/YELLOW (NC)
GREEN/RED (NC)
GREEN/RED (NC)
GREEN/YELLOW (NC)
GREEN/YELLOW (NC)
GRAY/RED (NC)
GRAY/RED (NC)
GRAY/YELLOW (NC)
GRAY/YELLOW (NC)
IGNITION SWITCH
WHITE/BLACK - IGNITION (+) OUTPUT
WHITE/BLACK - IGNITION (+) OUTPUT
WHITE/RED (NC)
WHITE - 12V (+)
WHITE - 12V (+)
HOOD SWITCH (-) INPUT - GREEN/BLACK
HOOD SWITCH (-)
RF KIT SOLD SEPARATELY
SEE DISTRIBUTOR FOR
AVAILABLE MODELS
12V (+) INPUT - RED
12V (+) INPUT - RED
GROUND (-) INPUT - BLACK
GROUND (-) INPUT - BLACK
12V (+)
CANL CANH
IGNITION (+)
CONTROLCONTROL
(NC) RED/WHITE
(NC) BROWN
(NC) BROWN
(NC) PURPLE/YELLOW
(NC) PURPLE/YELLOW
(NC) PURPLE/BLACK
(NC) PURPLE/BLACK
(NC) WHITE
(NC) WHITE
(NC) BLACK/WHITE
(NC) PURPLE/WHITE
GREEN
READ:
PARKING LIGHT
NOTE
(NC) BLUE/BLACK
Doc. No.: ##10844##

TYPE 4 - WIRING DIAGRAM
Page 9 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
DA
B
C
G
A
B
C
F
D
E
G
JH
!
E
OL-HRN CH5
BLUE/RED (NC)BLUE/RED (NC)
BLUE/YELLOW (NC)
BLUE/YELLOW (NC)
GREEN/RED (NC)
GREEN/RED (NC)
GREEN/YELLOW (NC)
GREEN/YELLOW (NC)
GRAY/RED (NC)
GRAY/RED (NC)
GRAY/YELLOW (NC)
GRAY/YELLOW (NC)
ASSEMBLY
REQUIRED - SOLD SEPARATELY
VEHICLE HARNESS
REFER TO
ASSEMBLY FOR PROPER
CONNECTIONS AND MATCH
EACH LETTER ACCORDINGLY
RF KIT SOLD SEPARATELY
SEE DISTRIBUTOR FOR
AVAILABLE MODELS
HOOD SWITCH (-) INPUT - GREEN/BLACK
(NC) RED/WHITE
(NC) BROWN
(NC) BROWN
(NC) PURPLE/YELLOW
(NC) PURPLE/YELLOW
(NC) PURPLE/BLACK
(NC) PURPLE/BLACK
(NC) WHITE
(NC) WHITE
(NC) BLACK/WHITE
GREEN
(NC) PURPLE/WHITE
HOOD SWITCH
READ:
PARKING LIGHT
NOTE
(NC) BLUE/BLACK
Doc. No.: ##10844##

XX-XX PAGE X-XADS-AL(DL)-CH4 1-2 PAGE X-X
ADS-AL(DL)-CH4 90
INSTALLATION MODE SELECTION
1Press and release
programming button
to select installation mode.
2Press and hold
programming button
until LED turns solid GREEN
to register selection.
!After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULE PROGRAMMING PROCEDURE
1Close driver door.
Re-open driver door to wake up
data bus.
6Turn key to OFF position.
OFF
2Insert key into ignition.
3Turn key to ON position.
ON
5Within 5 seconds, LED will fl ash
GREEN rapidly.
4LED will turn solid RED.
10 Module Programming
Procedure completed.
8Press UNLOCK on the OEM
remote.
If vehicle is not equipped with
OEM remote, press module
programming button.
UNLOCK
9Wait, LED will turn solid GREEN
for 2 seconds.
7Remove key.
Page 10 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

VALET MODE PROGRAMMING PROCEDURE
NOTE
I In Valet Mode, the Remote starter is not functional. Keyless
entry, Lock and Unlock will remain functional.
II See RF kit user manual for alternate valet mode
programming.
1Insert key into ignition.
2TIME RESTRICTI
 N
Complete this step
within 7 SECONDS.
Turn key to OFF position then
to ON position fi ve times [5x]
rapidly.
ON
OFF
x5
TIME RESTRICTI
 N COMING UP !
3Wait, LED will turn solid RED for
2 seconds.
6Valet Mode Programming
Procedure completed.
!To exit valet mode: repeat steps 1 to 6.
5Remove key.
4Turn key to OFF position.
OFF
Page 11 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

AFTERMARKET REMOTE PROGRAMMING
NOTE
I All aftermarket remotes must be programmed to the RF-Kit.
Refer to the RF-Kit user guide for aftermarket remote
features and programming procedures.
Page 12 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

ADS-AL(RS)-CH4 PAGE X-X
MODULE NAVIGATION PROCEDURE
NOTE
I It is mandatory to exit the Module Navigation at the end of this
procedure. Failure to exit the Module Navigation will drain
vehicle battery.
II Use the Module Navigation Chart on the next page.
III Module must be programmed to the vehicle.
IV Set ignition to OFF position.
1To access the MENUS:
Press and hold programming
button until LED turns solid
GREEN.
Release programming button.
!To exit the Module Navigation at any time:
Follow step 8.
5To access the SETTINGS:
Press and hold programming
button until LED turns solid
GREEN.
Release programming button.
LED will fl ash GREEN as many
times as the current (or default)
setting number, continuously.
9Module navigation completed.
!To return to the MENUS: exit the Module Navigation and
redo the Module Navigation Procedure.
!Failure to exit the Module Navigation will drain vehicle
battery.
2In the MENUS:
Press the programming button
as many times as the menu
number indicates.
LED will fl ash GREEN an equal
amount of times continuously.
4In the OPTIONS:
Press the programming button
as many times as the option
number indicates.
LED will fl ash RED an equal
amount of times continuously.
3To access the OPTIONS:
Press and hold programming
button until LED turns solid
RED.
Release programming button.
6In the SETTINGS:
Press the programming button
as many times as neccesary to
access your setting.
LED will fl ash GREEN an equal
amount of times continuously.
8MANDATORY:
EXIT MODULE NAVIGATION
Press and hold programming
button for 7 seconds.
LED will fl ash RED rapidly.
Release programming button.
LED will turn OFF.
7To save and return to the
OPTIONS:
Press and hold programming
button until LED turns solid
RED.
Release programming button.
LED will fl ash RED as many
times as the current option
number continuously.
Confi gure every other setting
and proceed to step 8.
Page 13 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

XX-XX PAGE X-X
MODULE NAVIGATION CHART
ADS-AL(RS)-CH4 PAGE X-X
MENUS OPTIONS SETTINGS
1
CONFIGURATION
1DISARM/UNLOCK BEFORE
START
1OFF
2ON
2RELOCK AFTER START
1OFF
2ON
3RELOCK AFTER SHUTDOWN
1OFF
2ON
4FORCE UNLOCK ALL ON FIRST
PRESS
1OFF
2ON
5TAKEOVER
1ENABLE
2DISABLE*
6SECURE TAKEOVER DELAY
145 SEC
290 SEC
303 MIN
404 MIN
7FACTORY KEYLESS
RS SEQUENCE
1DISABLE
2N/A
3LOCK + UNLOCK + LOCK
4LOCK + LOCK + LOCK
8MODULE RUN TIME
103 MIN
205 MIN
310 MIN
415 MIN
525 MIN
630 MIN
735 MIN
815 MIN
9WAIT TO START DELAY
102 SEC
205 SEC
308 SEC
410 SEC
515 SEC
620 SEC
725 SEC
830 SEC
10 N/A 1N/A
11 N/A 1N/A
12 N/A 1N/A
2N/A
3N/A
4Technical Support Only
5Technical Support Only
6Technical Support Only
7Technical Support Only
NOTE
I Default settings are listed in bold.
II Make sure the option is covered on the vehicle before
attempting to change the setting.
*Vehicle will shudown when a door is opened.
Page 14 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

REMOTE STARTER ERROR CODES
NOTE
I WARNING: The following applies only when the parking lights
are connected and supported by the system.
II After a remote starter failure, the parking lights will fl ash [X]
number times to indicate an error code. See table.
[X] NUMBER OF
PARKING LIGHT
FLASHES
REMOTE STARTER ERROR CODES
3 Foot brake is ON.
4 Hood is open.
5 Engine tach signal is lost.
6 System is in Valet Mode.
7 Vehicle is moving (VSS).
8 Glow plug timeout error.
Page 15 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

XX-XX PAGE X-XCLASSIC PAGE 1-1
LED STATUS
DIAGNOSTICS
DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF
Flashing RED Missing/wrong information from
fi rmware or vehicle Incorrectly programmed Incorrectly programmed or connected
Solid RED Waiting for more vehicle information Incorrectly programmed Not programmed waiting for more
vehicle information
Flashing GREEN Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid GREEN then OFF Correctly programmed Reset in progress Reset in progress
OFF No activity or already programmed Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
MODULE DIAGNOSTICS
FACTORY RESET PROCEDURE
7Repeat programming procedure.
!Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
1DISCONNECT all connectors
from module EXCEPT the black
4-PIN standard or optional data
connector.





6RECONNECT all connectors.


 
2DISCONNECT black 4-PIN
standard or optional data
connector.

4When LED fl ashes red,
RELEASE programming button.
5LED will turn solid red for 2
seconds.
RESET COMPLETED.
3PRESS AND HOLD programming
button while connecting either
4-PIN standard or optional data
connector.
IDENTIFY VEHICLE YEAR
1Locate the Vehicle Identifi cation
Number (VIN) and identify the
10th character.
2Match the VIN’s 10th character
to its corresponding year.
L > 1990 S > 1995 Y > 2000 5 > 2005 A > 2010
M > 1991 T > 1996 1 > 2001 6 > 2006 B > 2011
N > 1992 V > 1997 2 > 2002 7 > 2007 C > 2012
P > 1993 W > 1998 3 > 2003 8 > 2008 D > 2013
R > 1994 X > 1999 4 > 2004 9 > 2009 E > 2014
4 Y 1 N53 A 5 T A L 8 D 5 R 0 X

Page 16 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##

TAKE OVER PROCEDURE - TO THE VEHICLE OWNER
2Insert key into ignition.
3Turn key to ON position.
Wait 2 seconds for key
validation.
ON
5Take over procedure completed.
4Press and release BRAKE pedal.
!Failure to follow procedure will result in vehicle engine
shutdown.
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
1Press UNLOCK on after-market
remote.
TAKE OVER PROCEDURE - PUSH TO START - TO THE VEHICLE OWNER
4Take over procedure completed.
3Press and release BRAKE pedal.
!Failure to follow procedure will result in vehicle engine
shutdown.
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
1Press UNLOCK on after-market
remote.
2DO NOT PRESS BRAKE PEDAL
Push start button twice [2x] to
ON position.
Wait 2 seconds for key
validation.
x2

ADS-AL(RF)-CH4 PAGE X-X
Page 17 of 17 OL-AL(RS)-CH5-EN 20130212
INSTALL GUIDE
WWW.CARALARM.COM Omega Research & Development Inc. © 2013
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##10844##