Onaroo OTW091-US User manual

Instructions
For Use
Model No. OTW091-US
Alarm Clock & Night-Light
Batteries Not Included
Requires four (4) 1.5V AA (LR6) batteries. Phillips head screwdriver (not included) required for
battery replacement. Adult supervision recommended.
Page 1
IMPORTANT SAFETY INSTRUCTIONS
For your protection, please read these safety instructions completely before operating this product. All
operating and use instructions should be followed. All warnings printed on the device and in the
operating instructions should be adhered to. Please keep this manual for future reference.
Batteries
Adult supervision is recommended when changing batteries. Non-rechargeable batteries are not to be
recharged. Rechargeable batteries are to be removed from the item before being charged.
Rechargeable batteries are only to be charged under adult supervision. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries. Do not mix old and new batteries. Only
batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted
with the correct polarity. Exhausted batteries are to be removed from the item. The supply terminals
are not be short-circuited. Dispose of batteries safely. Batteries may explode or leak if disposed of in a
fire.
Moisture & Heat
Do not use this device near water. For example, do not use this device near a bathtub, wash bowl,
kitchen sink or laundry tub. Do not place water-filled vessels on this device. Do not place this device
near any heat sources such as radiators, stoves, amplifiers or other devices that produce heat. Do not
place an open flame on or near this device.
Object & Liquid Entry
Never insert objects of any kind into this product, through ventilation openings, as these objects may
touch dangerous voltage points or create a short circuit that could result in a fire or electric shock.
Never spill liquid of any kind on or into the device.
Care & Maintenance
Use a soft, damp cloth to wipe down the unit. Do not use liquid, aerosol or abrasive cleaners. Product
may wear over time, with use. Parents should periodically examine this product for potential hazards.
Any potentially hazardous parts should be repaired or replaced. Keep packaging and manual for future
reference.
Damage Requiring Service
Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. All servicing should be referred to qualified personnel. This
product should be fixed by qualified service personnel under the following conditions:
1. If liquid has been spilled, or objects have fallen into the unit.
2. If the unit is exposed to rain or water.
3. If the product does not operate normally when following the operating instructions.
4. If the unit has been dropped or damaged in any way.
5. When the product exhibits a distinct change in performance.
Replacement Parts
In the event that replacement parts are required, ensure that the service technician uses parts specified
by the manufacturer or those deemed to be equivalent. Unauthorized substitutions may result in fire,
electric shock, or other hazards.

Page 2
SERVICE CONTACT INFORMATION
Please visit onaroo.com for the most up-to-date contact information and for details
regarding product servicing and/or warranty claims. You must receive a Return
Merchandise Authorization (RMA) number before shipping any item to Patch
Products. This product is distributed outside of the U.S., in select regions, by
authorized distribution partners. Patch Products does not handle foreign warranty
claims. For warranty service please contact your point of purchase for assistance.
Patch Products products purchased from U.S. retailers and shipped to international
locations are not covered under our domestic warranty policy.
We want your comments about our games, puzzles and toys. Contact us at:
Customer Service
1400 E. Inman Pkwy. Beloit, WI 53511
[email protected] 1-800-524-4263
For more fun, visit patchproducts.com.
Page 3
The OK to Wake!™ Alarm Clock & Night-Light is a fun clock for kids that actually
helps parents get more sleep!
The secret is the special night-light that can be set to turn green when it’s OK to get
out of bed to come see mom and dad.
You’ll be amazed at how quickly kids learn and how excited they are when the clock
glows green. Best of all, OK to Wake! does all the work while you catch up on your
sleep!
Left Toe
Button
Display
Control
Panel
Faceplates
Right Toe
Button
Fig. 1 OK to Wake!™
Introduction

Page 5
Setting the Time
When the batteries are first inserted, OK to Wake!
beeps and displays “12:00 p.m.” To set the correct
time, open the rear door to reveal the control
panel. See Fig. 3 below.
1) Hold down the SET button for two seconds.
“SET” flashes and “12 Hr” is displayed.
See Fig. 4.
2) Use the HOUR +/- buttons to toggle between
12- and 24-hour clock format. Tap SET to select
the format and continue.
3) The clock displays “SET 12:00 p.m.” (if in
12-hour format). See Fig. 5.
Use the HOUR +/- and MIN +/- buttons to
adjust the time (hold down these buttons to
scroll rapidly).
4) Press SET again when you are done to lock in
the new time. “SET” disappears from the
display.
[SET]
REVIEW
ON | OFF
WAKE
ALARM
HOUR MINAUTO-OFF NAP
Fig. 3 Control panel
SET
Fig. 4 Set clock format
SET
Fig. 5 Set time
Setup
Unpack OK to Wake! making sure to keep all packing materials away from children.
The product comes with two interchangeable faceplates. The pre-installed green bug
faceplate may be removed as follows:
1) If present, remove the adhesive tape at the bottom of the faceplate.
2) Slightly rotate the faceplate counter-clockwise and detach.
3) Remove the protective screen cover from the display.
4) Attach your favorite faceplate by aligning the tabs with the slots on the clock and
rotating clockwise to lock it in place.
Insert four AA (LR6) batteries into the battery compartment under the clock. You’ll
need a small Phillips head screwdriver. Place the batteries over the ribbon to make
removal easier next time. If the night light becomes dim or the clock doesn’t work
properly, it’s time to change the batteries. See Fig. 2.
Fig. 2 Battery compartment
Page 4
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Patch Products, LLC
1400 E. Inman Pkwy.
Beloit, WI 53511 USA
Power Source: DC 6V (4 x AA/LR6)
Model No. OTW091-US
U.S. Pat. D588,022.
Made in China.

Using the OK to Wake! Timer
The OK to Wake! night-light timer is an exciting
new sleep aid for parents! OK to Wake! glows
green in the morning at a time that you select.
Kids quickly learn to stay in bed until “Green
means GO!”
To set the OK to Wake! night-light timer:
1) Hold down the WAKE button for two seconds
until “SET OK TO WAKE!” flashes on the
display (OK to Wake! time is 6:00 a.m. by
default). See Fig. 6.
2) Use the HOUR +/- and MIN +/- buttons to set
the time you want the green light to turn on
(For example, 7:00 am).
3) Press WAKE again to lock in the new setting
and return to the time display. See Fig. 7.
Notice that “OK TO WAKE!” will remain on the
display as a reminder that the OK to Wake!
timer is active.
When the OK to Wake! time is reached, the clock
will glow green and the lit bulb icon will appear in
the display, letting your kids know that it is now OK
to get up. See Fig. 8.
Pressing the left toe button will toggle the green
light off and on. Pressing the right toe button will
stop the OK to Wake! timer and turn off the green
light.
Leave the OK to Wake! timer active if you want the
green light to turn on every day. Toggle this
function off and on by tapping the WAKE button.
Note: At the OK to Wake! time,
the clock glows green for 30
minutes (or the Auto-Off
duration - see page 12). During
this period, pressing the left toe
button toggles the green light.
After this period, the night-light
color returns to yellow (if lit) until
the OK to Wake! time on the
following day.
OK
TO WAKE!
Fig. 7 OK to Wake! active
OK
TO WAKE!
Fig. 8 OK to Wake! time
SET
ON OK
TO WAKE!
Fig. 6 Set OK to Wake!
Page 6 Page 7
Setting the Alarm
OK to Wake! can also be used as an alarm clock
with snooze function. Note that the alarm is set
and/or used completely independently from (or in
conjunction with) the green night-light timer. To set
the alarm:
1) Hold down the ALARM REVIEW button for two
seconds until “SET” and the bell icon flash in
the display. See Fig. 9.
2) Adjust the wake time (7:00 a.m. by default)
using the HOUR +/- and MIN +/- buttons (press
and hold these buttons to scroll rapidly).
3) Press ALARM REVIEW again to lock in your
setting. The current time is displayed and the
alarm is automatically activated (bell icon is
displayed). See Fig. 10.
The alarm will sound each day. Toggle the alarm
feature OFF at any time by tapping the ALARM
ON | OFF button. When the alarm is off, the bell
icon is not displayed. See Fig. 11.
Continued ...
Fig. 10 Current time
Fig. 11 Alarm off
SET
Fig. 9 Set alarm

Using the Nap Timer
OK to Wake! has a handy nap timer that makes it
easy to set an alarm and/or a green light alert for
naps during the day, without disrupting other
settings.
To start a nap, just tap the NAP button. The nap
timer will count down and chime after one hour.
After one minute the display looks like Fig. 16 (the
colon flashes).
The nap timer can be set to chime, turn on the
green light, or both. This setting may be toggled
by tapping the WAKE button during the nap or
when setting the nap duration (see below).
To customize the nap timer duration:
1) Hold down the NAP button for two seconds
until “SET NAP” flashes. See Fig. 17.
2) Adjust the nap duration (the length of the nap
in hours and minutes) using the HOUR +/- and
MIN +/- buttons.
3) Tap the WAKE button to select whether the
alarm chime, green light, or both should turn on
at the end of the nap.
4) Press NAP again when you are done. “SET”
disappears and the nap begins (the colon
flashes) automatically.
Toggle the nap function on or off at any time by
tapping NAP. OK to Wake! remembers the nap
duration that you last programmed.
NAP
Fig. 16 Nap timer running
NAP
SET
Fig. 17 Set nap timer
SNOOZE
Fig. 18 Nap ended,
snooze on
Note: At the end of the nap, the
alarm and/or green light will turn
on. Press the right toe button to
turn these off. Press the left toe
button to snooze the alarm
and/or light for 10 minutes
(SNOOZE will appear in the
display). You can press the right
toe button to cancel the snooze
at any time. Fig. 18.
Page 9Page 8
Setting the Alarm
(Continued)
Review the currently set alarm wake time by
tapping the ALARM REVIEW button. “REVIEW”
appears on the LCD with the alarm wake time or
“OFF”. See Figs. 12 & 13.
When Alarms are Sounding
When the alarm is sounding, press the right toe
button to turn it off.
Pressing the left toe button will snooze the alarm
for 10 minutes (”SNOOZE” will appear in the
display). Press the right toe button to cancel the
snooze at any time. See Fig. 14.
When the alarm is sounding, an animation will
make waking up more fun. See Fig. 15.
REVIEW
Fig. 13 Alarm disabled
SNOOZE
Fig. 14 Alarm snooze
Fig. 15 Fun animation
REVIEW
Fig. 12 Alarm set
for 7:00 am

Page 11
Other Onaroo Products from Patch Products
Please visit us on the web at onaroo.com
Night Owl Portable
Night-Light
OK to Wake!™ Owl
with Night-Light & Music
Teach Me Time!™ Talking
Alarm Clock & Night-Light
Danny the Penguin
Portable Night-Light
Page 10
Night-Light
The OK to Wake! clock also has a soft-glow, yellow
night light that can be toggled on and off at any
time by pressing the left toe button. The lit bulb
icon appears in the display when the night light is
on. See Fig. 19.
Note: If the OK to Wake! timer is on and the clock
is green, pressing the left toe button will toggle
the green light on and off, rather than the yellow
light. See note on page 8.
Auto-Off
To save energy, the yellow and green night-lights
will turn off automatically after a period of time (30
minutes by default).
This setting may be customized by tapping the
AUTO-OFF button (0:15, 0:30, 1:00, 1:30 or 2:00).
When the desired setting is displayed, stop
tapping the AUTO-OFF button. After a moment
the clock resumes ordinary time display, and the
new auto-off setting is locked in. See Fig. 20.
Brightness
When the clock is displaying the time, you can
adjust the display and night-light brightness by
pressing the MIN +/- buttons. There are three
distinct brightness settings. See Fig. 21.
Surprise
When the clock is displaying the time, press the
right toe button for a fun surprise! See Fig. 22.
AUTO-OFF
Fig. 20 Set auto-off time
Fig. 21 Adjust brightness
Fig. 22 Surprise!
Fig. 19 Night-light on

Note: Due to production changes and improvements, actual product may
vary slightly from images shown in manual and/or on packaging.
Manual v4.0 (US)
U.S. Patent No. D588,022.
© 2014 Patch Products, LLC. All Rights Reserved.
onaroo.com
Page 12
Coverage
In the United States, Patch Products, LLC warrants this product against defects in original material and
workmanship for a period of one year under normal use and conditions. Warranty coverage outside of
the United States may vary. Please see information regarding non-U.S. warranty claims, below.
Non-Coverage
This warranty does not cover customer instruction, installation, or set up problems. This warranty does
not cover cosmetic damage or damage resulting from acts of God, accident, misuse, abuse,
negligence, commercial application (or rental), or modification. This warranty does not cover damage
due to improper operation or maintenance, connection to an improper voltage supply, or attempted
repair by anyone other than Patch Products, LLC or Patch Products, LLC authorized service facilities.
This warranty does not cover products sold "as is" or "with all faults". This warranty is valid only in the
United States and is invalid if the product serial number has been altered or removed.
Making a Warranty Claim - United States
Please check onaroo.com for the latest information pertaining to warranty claims. At the company’s
discretion, Patch Products, LLC will repair or replace the defective unit. Proof of purchase in the form
of a bill of sale or receipted invoice which is evidence that the unit is within the warranty period must
be presented to obtain warranty service.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS
PROVIDED ABOVE, BEGINNING WITH THE ORIGINAL DATE OF PURCHASE. NO WARRANTIES,
WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THE PRODUCT THEREAFTER. WE MAKE NO
WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE PURCHASE
PRICE PAID BY THE PURCHASER. UNDER NO CIRCUMSTANCES WILL WE BE LIABLE FOR ANY
LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF
OR IN CONNECTION WITH THE USE OF THIS PRODUCT.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO
THESE RESTRICTIONS MAY NOT APPLY TO YOU.
Making a Warranty Claim - Outside of the United States
This product is distributed outside of the United States, in select regions, by authorized distribution
partners. Patch Products does not handle foreign warranty claims. For warranty service please contact
your point of purchase for assistance. Patch Products products purchased from U.S. retailers and
shipped to international locations are not covered under our domestic warranty policy.
LIMITED WARRANTY