2
ONEbox quick guide
Key operation
Front panel key operation when ONEbox is in standby mode :
Hold right key can change input connection, press again will switch to next input. Press left key to confirm and
make connection. If your speakers are turned on, you will hear voice guidance.
Hold left key can activate add speaker, you will hear voice guidance if your have front speaker connected.
Long hold middle (both left and right key), your ONEbox will put to power off mode and your speakers will be
turned off accordingly.
Front panel key operation when ONEbox is in play mode :
Press left key to decrease [-] volume, press right key to increase [+] volume
Press middle (both left and right key) to mute audio (blue LED blinking), press any key again to unmute
Long hold middle (both left and right), ONEbox will go back to standby mode
When ONEbox is power off :
Press any key will wake up the ONEbox, WiFi connection will be resumed in ~60s (red LED blinking)
Rear panel (from left to right) :
LFE analogue output on RCA jack, connect to your active subwoofer
Tips : local LFE output default setting is off, remember to enable local LFE output in speaker setup page
Micro USB port for standard USB audio and 5V power supply to your ONEbox
Tips : use high current 2A USB cable to get stable operation
Optical input for DTS/Dolby/LPCM digital audio input, connect to Blu-Ray player or TV digital audio output
USB A-female for USB host port, plug-in a (4~32GB) USB RAM with song files as a local music server, or you can
plug in a Bluetooth USB dongle to extend BT connection in your ONEbox
Tips for ONEbox placement to get better wireless connectivity :
-WiFi antenna is on the left, try to put near your WiFi router
-DECT antenna is on the right, that is wireless channel connected to speakers
-Don’t put ONEbox on metal surface, metal surface will absorb radiation and get poor in wireless
-Use high current micro USB cable for ONEbox powering, sometime WiFi will be lost due to poor power quality
