One Forall KAMELEON 6 User manual

ONE FOR ALL
®
6
USER GUIDE & CODE BOOK
URC-4300
Retain For Future Reference
Universal Remote

Table of Contents
About Your ONE FOR ALL 6 ........................................ 2
Features and Functions.................................................... 4
Installing the Batteries .................................................... 6
Setting Up Your Television............................................. 7
Setting Up Your Video Recorder .................................... 8
Setting Up Your Other Devices ...................................... 9
The Search Method ........................................................ 11
Getting Codes from the ONE FOR ALL 6..................... 12
Changing the Device Keys.............................................. 13
Punch-Through (Control Across Device Types)............ 15
Scan................................................................................. 16
Colour & Brightness ....................................................... 18
More on Teletext and Fastext ......................................... 19
Key Sequence .................................................................. 20
Key Magic
®
..................................................................... 22
Preventing Accidental Code Changes............................ 23
Trouble-Shooting ............................................................ 24
Consumer Help-Line....................................................... 25
Telephone Upgradable Technology ................................ 26
Set-Up Codes .................................................................. 27
Set-Up Codes for Televisions........................................ 28
Set-Up Codes for Video Recorders ............................... 30
Set-Up Codes for Satellite Receivers............................ 32
Set-Up Codes for Cable Converters ............................. 34
Set-Up Codes for CD Players and Mini Disk Players... 34
Set-Up Codes for Audio Amplifiers ............................. 35
Set-Up Codes for Audio Amplifier/Tuners................... 35
Set-Up Codes for Record Players.................................. 35
Set-Up Codes for Miscellaneous Audio........................ 36
Set-Up Codes for Audio Cassette Players..................... 36
Set-Up Codes for DAT and DCC................................. 36
Set-Up Codes for Laser Disc Players............................. 36
Set-Up Home Automation ........................................... 36
■■■■
1
■ ■ ■ ■
Note: If you’re having problems operating all the functions of
your device, don’t worry, your ONE FOR ALL may just need
customising for your model type. Just call our consumer help-
line and we’ll get you on the right track.

About Your ONE FOR ALL 6
Your ONE FOR ALL 6 Package contains:
Your ONE FOR ALL 6 Universal Remote Control
Your ONE FOR ALL 6 User Guide & Code Book
Your User Guide & Code Book is divided into two parts:
set-up instructions and device codes. You will need this
guide to set up your new ONE FOR ALL 6 so please be
sure to keep it.
Your ONE FOR ALL 6 needs four new AAA/LR03
alkaline batteries.
Your ONE FOR ALL 6 is designed to let you use one
remote to operate your Video and Audio Equipment; any
device designed to be operated by an infrared signal. You
can choose any combination of 6 devices you would like to
operate with your ONE FOR ALL 6. For example, 2-TVs,
1-VCR, 1-Satellite Receiver, 1-CD Player and 1-Amplifier;
the choice is yours.
■ ■ ■ ■
■ ■ ■ ■
2

■■■■
■■■■
3
Device Keys
Teletext Keys
Rewind
Play
Stop
Number Keys
-/-- Key
LED
Normalize
Mute
Pause
Fast Forward
Record
Fastext keys
Programme +/-
Key
Scan Key
Volume +/- Key
Power
MAGIC Key

Features and Functions
Key Function
LED LED
The LED (Light Emitting Diode) flashes
red to show the remote is working.
Power
The Power key controls the same
function as your original remote.
MAGIC Key
The MAGIC key is used to set up your
ONE FOR ALL 6 and to access special
functions.
Device Keys
The TV, VCR, SAT, CD, AUX1 and
AUX2 keys select the home
entertainment device to be controlled.
For example pressing the TV key allows
the remote to control the functions of
your Television, after pressing VCR you
can operate your Video Cassette
Recorder, etc. For more detailed
information, please see page 9.
Normalize Key
The Normalize key returns all settings of
your television to their standard levels.
Mute
The Mute key operates the same
functions it did on your original remote.
Number Keys
The Number keys (0-9, 10, 20) provide
functions just like your original remote,
such as direct access programme
selection. If your original remote uses
one/two digit input switching (-/--
symbol), this function can be obtained by
pressing the -/-- key, which is the same as
the 10 key.
■■■■
■■■■
4
VCR
TV
SAT CD
AUX1 AUX2

Volume, Programme
The Volume and Programme keys control
the two most frequently used functions of
your audio and video devices. They
operate just as those on your original
remote.
Scan
The Scan key allows you to easily browse
through the programmes on your
Television, Video Recorder, Satellite
Receiver and Cable Converter. See page
16 for more information.
Video Recorder Keys
After pressing the VCR key, the Video
Recorder keys operate the functions of
your Video Recorder. To prevent
accidental recordings, the Record key
must be pressed twice to start recording.
Teletext/Fastext Keys
After pressing the TV key, the top row of
the Video Recorder keys are used to
operate the main teletext functions. The
symbols above the keys are for teletext.
The Text keys are used to access the
teletext functions of your Television. Of
course, your Television must be teletext
capable. For an explanation of the
teletext symbols, please refer to page 19
of this manual.
After pressing the TV key, the bottom
row of the Video Recorder keys marked
red, green, yellow and blue allow you to
access the fastext functions of your
television. Again, your television must be
fastext capable to operate these functions.
For a more detailed explanation on how
teletext and fastext work, please refer to
the manual of your Television set.
■■■■
■■■■
5
SCAN
VOL CH
C/P

Installing the Batteries
Your ONE FOR ALL 6 needs four new AAA/LR03
alkaline batteries.
Remove the battery cover
from the back of your ONE
FOR ALL 6.
Match the batteries to the
+ and -marks inside the
battery case, then insert the
batteries.
Press the battery cover back
into place.
■■■■
■■■■
6
1
2
3
Note: In order to avoid having to reprogramme your ONE
FOR ALL 6 after you remove the batteries, you will need to
insert new batteries within 3 minutes. Also it is best that
you do not use rechargeable batteries.

Setting Up Your Television
To set up the ONE FOR ALL 6 for your Television:
Find your Television code in
the Set-Up Code section
(starting on page 28). Codes
are listed by brand name.
The most popular code is
listed first. Make sure your
Television is switched on;
any programme is fine.
Press and release the ONE
FOR ALL 6’s TV key, then
press and hold down the
MAGIC key until the red
light blinks twice. (The light
will blink once and then
twice.)
Enter your three-digit TV
code using the number keys.
The red light will blink
twice.
Now, aim the ONE FOR
ALL 6 at your Television and
press POWER. If your
Television switches off, your
ONE FOR ALL 6 is ready to
run your Television.
Write your code in the three boxes on page 27, for easy
future reference.
To control your Television, press TV first.
If your Television does not respond, follow steps 1 through
4 with each code listed for your brand. If none of the codes
listed for your brand operate your Television, then try the
search method described on page 11, even if your brand is
not listed at all.
■■■■
■■■■
7
1
2
3
4
TV
ONE FOR ALL
Fernseher
Admiral 087 093 264
163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037

Setting Up Your Video Recorder
To set up the ONE FOR ALL 6 for your Video Recorder:
Find your Video Recorder
code in the Set-Up Code
section (starting on page 28).
Codes are listed by brand
name. The most popular
code is listed first. Switch on
your Video Recorder and
insert a blank tape.
Press and release the ONE
FOR ALL 6’s VCR key, then
press and hold down the
MAGIC key until the ONE
FOR ALL 6’s red light blinks
twice. (The light will blink
once and then twice.)
Enter your three-digit VCR
code using the number keys.
The red light will blink
twice.
Now, aim the ONE FOR
ALL 6 at your Video
Recorder and then press
PLAY. If your Video starts
playing the tape, your ONE
FOR ALL 6 is ready to run
your Video Recorder.
Write your code in the three boxes on page 27, for easy
future reference.
To control your Video Recorder, press the VCR key first.
If your Video Recorder does not respond, follow steps 1
through 4 with each code listed for your brand. If none of
the codes listed for your brand operate your Video
Recorder, then try the search method described on page
11, even if your brand isn’t listed at all. If you change
programmes on your Television through your Video
Recorder, press VCR and not TV, before you use the
programme keys.
■■■■
■■■■
8
1
2
3
4
VCR
PLAY
ONE FOR ALL
Fernseher
Admiral 087 093 264
163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037

Setting Up Your Other Devices
To set up the ONE FOR ALL 6 for your other devices:
Find the code for your de-
vice in the Set-Up Code
section (starting on page
28). Codes are listed by de-
vice type and brand name.
The most popular code is
listed first. Make sure your
device is turned on.
Press the device key on the ONE FOR ALL 6 for
the device you wish to control. Devices can be
found under the following key:
Device Device Key
Television
Video Recorder
Satellite Receiver
Cable Converter
CD Player
Mini Disk Player
Audio Amplifier
Audio Amplifier/Tuner
Record Player
Miscellaneous Audio
Home Automation
Audio Cassette Player
Digital Audio Tape
Laser Disc Player
Press and hold down the
MAGIC key until the red
light blinks twice. (The
light will blink once and
then twice.)
Enter your three-digit
device code using the num-
ber keys. The red light will
blink twice.
■■■■
■■■■
9
1
2
SAT
CD
ONE FOR ALL
Fernseher
Admiral 087 093 264
163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037
TV
AUX1
TV
AUX2
TV
VCR
3
4
}
}
}
}

Now, aim the ONE FOR
ALL 6 at your device and
press POWER. If your
device switches off, the
ONE FOR ALL 6 is ready
to operate your device.
Write the code for your device(s) in the boxes on page
27, for easy future reference.
Remember to press the correct device key before oper-
ating your device. Only one device (CD, amplifier, cas-
sette, etc.) can be assigned to a device key. If your
original remote operates more than one device (for
example, a receiver, CD player and cassette player in
one remote), you need to set up each device separately.
If your device does not respond, follow steps 1 through 5
with each code listed for your brand. If none of the
codes listed for your brand operate your device, then try
the search method described on page 11, even if your
brand is not listed at all.
■■■■
■■■■
10
5
Note: If your device’s original remote control does
not have a power key, press PLAY instead of
POWER when setting up your device.

The Search Method
If your device does not respond to the ONE FOR ALL 6
after you have tried all the codes listed for your brand, try
the Search Method. The Search Method may also work if
your brand is not listed at all.
Let’s say you cannot get your ONE FOR ALL 6 to control
your Television:
Switch your Television on; any
programme is fine.
Press the TV key on your ONE
FOR ALL 6.
Aim the ONE FOR ALL 6 at
your Television. Press and hold
down MAGIC until the ONE
FOR ALL 6’s red light blinks
twice. Then, press 9 9 1. The
red light will blink twice.
Now, alternate between TV and
POWER, over and over, until
your Television turns off.
You may have to press these keys
many times, so please be patient.
It could take up to 5 minutes.
Remember to keep pointing the
ONE FOR ALL 6 at your
Television when you press the
POWER and TV keys.
When your Television turns off,
press and release MAGIC.
Don’t forget, press MAGIC as
soon as your Television turns off.
Now your ONE FOR ALL 6 is
ready to run your Television.
To search for the code for your other devices, follow steps 1
through 5, only substitute the appropriate device key
during steps 2 and 4. For example, to search for the code
for your Video, press the VCR key; for your Satellite or
Cable Converter, press the SAT key; for your Amplifier,
press the AUX1 key, etc. Use the chart on page 9 for a
guide.
■■■■
■■■■
11
1
3
4
5
TV
TV
2
Note: If your device’s original remote control does not
have a power key, press PLAY instead of POWER
when searching for your code.

Getting Codes from the
ONE FOR ALL 6
Even if you have used the Search Method, it is handy to
know the code for your device for future reference. It’s easy
to get your code after you have set up your device.
To get your Television code:
Press TV.
Press and hold down MAGIC
until the ONE FOR ALL 6’s red
light blinks twice. Press 9 9 0.
The red light will blink twice.
For the first digit of your three-
digit code, press 1and count the
red blinks. If there are no blinks,
the digit is “0”.
For the second digit, press 2and
count the red blinks.
For the third digit, press 3and
count the red blinks. Now you
have your three-digit code.
Make sure you write your Television code in the three
boxes on page 27.
To get the code for your other devices follow steps 1
through 5, only substitute the appropriate device key
(VCR, SAT, CD, AUX1 or AUX2) during step 1. Write
the code for your device(s) in the three boxes on page 27,
for easy future reference.
■■■■
■■■■
12
1
2
3
4
5
TV
11
11
22
22
33
33

AUX
Changing the Device Keys
If you want, you can change any of the device keys (TV,
VCR, SAT, CD, AUX1 or AUX2) to operate another type
of device. The chart below lists how to change the keys
and to set up that device:
To Change: Press:
MAGIC* 9 9 2 VCR TV,
then TV MAGIC* Code
MAGIC* 9 9 2 SAT TV,
then TV MAGIC* Code
MAGIC* 9 9 2 CD TV,
then TV MAGIC* Code
MAGIC* 9 9 2 AUX1 TV,
then TV MAGIC* Code
MAGIC* 9 9 2 AUX2 TV,
then TV MAGIC* Code
MAGIC* 9 9 2 TV VCR,
then VCR MAGIC* Code
MAGIC* 9 9 2 SAT VCR,
then VCR MAGIC* Code
MAGIC* 9 9 2 CD VCR,
then VCR MAGIC* Code
MAGIC* 9 9 2 AUX1 VCR,
then VCR MAGIC* Code
MAGIC* 9 9 2 AUX2 VCR,
then VCR MAGIC* Code
MAGIC* 9 9 2 TV SAT,
then SAT MAGIC* Code
MAGIC* 9 9 2 VCR SAT,
then SAT MAGIC* Code
MAGIC* 9 9 2 CD SAT,
then SAT MAGIC* Code
MAGIC* 9 9 2 AUX1 SAT,
then SAT MAGIC* Code
MAGIC* 9 9 2 AUX2 SAT,
then SAT MAGIC* Code
■■■■
■■■■
13
TV
AUX1
TV
AUX1
TV
VCR
to
TV
to
SAT
SAT
SAT
SAT
SAT
SAT
SAT
TV
TV
TV
TV
TV
to
to
to
to
to
to
to
to
VCR
VCR
to
to
to
VCR
VCR
VCR
VCR
to
CD
CD
CD
TV
AUX2
to
TV
AUX1
TV
AUX2
TV
AUX2
* Hold down the MAGIC key until the red light blinks
twice. (The light will blink once and then twice.)
(continued)

To Change: Press:
MAGIC* 9 9 2 TV CD,
then CD MAGIC* Code
MAGIC* 9 9 2 VCR CD,
then CD MAGIC* Code
MAGIC* 9 9 2 SAT CD,
then CD MAGIC* Code
MAGIC* 9 9 2 AUX1 CD,
then CD MAGIC* Code
MAGIC* 9 9 2 AUX2 CD,
then CD MAGIC* Code
MAGIC* 9 9 2 TV AUX1,
then AUX1 MAGIC* Code
MAGIC* 9 9 2 VCR AUX1,
then AUX1 MAGIC* Code
MAGIC* 9 9 2 SAT AUX1,
then AUX1 MAGIC* Code
MAGIC* 9 9 2 CD AUX1,
then AUX1 MAGIC* Code
MAGIC* 9 9 2 AUX2 AUX1,
then AUX1 MAGIC* Code
MAGIC* 9 9 2 TV AUX2,
then AUX2 MAGIC* Code
MAGIC* 9 9 2 VCR AUX2,
then AUX2 MAGIC* Code
MAGIC* 9 9 2 SAT AUX2,
then AUX2 MAGIC* Code
MAGIC* 9 9 2 CD AUX2,
then AUX2 MAGIC* Code
MAGIC* 9 9 2 AUX1 AUX2,
then AUX2 MAGIC* Code
* Hold down the MAGIC key until the red light blinks
twice. (The light will blink once and then twice.)
■■■■
■■■■
14
TV
AUX1
TV
AUX1
TV
AUX1
TV
AUX1
TV
AUX1
TV
AUX1
TV
AUX2
TV
AUX2
TV
AUX2
TV
AUX2
TV
AUX2
TV
AUX2
CD
CD
TV
TV
SAT
SAT
VCR
VCR
to
to
to
to
to
to
to
to
to
to
SAT
TV
AUX1
TV
to
to
to
to
VCR
CD
CD
CD
CD
TV
AUX2
CD
to

To reset a device key to its original function, press:
TV key * 992
VCR key * 992
SAT key * 992
CD key * 992
AUX1 key * 992
AUX2 key * 992
* Hold down the MAGIC key until the red light blinks
twice. (The light will blink once and then twice.)
Punch-Through
(Control Across Device Types)
You may be able to use some features of your Television,
Video Recorder, Satellite Receiver and Cable Converter at
the same time. If you’re watching a programme on your
Video, you can adjust the volume (a TV function) without
first pressing the TV key. The chart below lists some of the
possibilities:
Last Key Pressed: You Can Control:
TV volume up and down, mute
TV volume up and down, mute
■■■■
■■■■
15
TV
AUX1
TV
AUX1
TV
TV
VCR
VCR
CD
CD
SAT
SAT
TV
AUX2
TV
AUX2
VCR
SAT

Scan
Auto Scan
Your ONE FOR ALL 6 comes with a special Scan key
which lets you go through every programme available on
your Television, Video Recorder, Satellite Receiver or
Cable Converter.
For example, to scan through the programmes on your
Television:
Aim the ONE FOR ALL 6 at
your Television and press TV,
then Scan. You will
automatically move through all
the programmes available on your
Television stopping at each
programme for about three
seconds. Remember, the ONE
FOR ALL 6 must remain aimed
at your Television the entire time
you are using Scan.
When you find a programme that you would like to
watch, simply press the Scan key again to stop the
Scan feature.
To use Scan with your Video Recorder, Satellite Receiver
or Cable Converter, simply press the appropriate device
key (VCR, SAT, AUX1 or AUX2) then Scan.
Favorite Programme Scan
Instead of Auto Scan, you can set your ONE FOR ALL 6
to scan through up to 10 of your favorite programmes. To
set up your favorite programmes for your TV:
Press and release the ONE FOR
ALL 6’s TV key, then hold down
the MAGIC key until the red light
blinks twice.
Press 9 9 6.
(continued)
■■■■
■■■■
16
1
1
2
2
TV
TV
SCAN

Enter the number for the first
programme you wish to be
included as a “favorite
programme”. Then press and
release MAGIC. (You must
enter the programme number exactly as you would
on your original remote. Example: If to get
programme 5 you had to press 05 or if you used the
10, 20 or -/-- keys, you will need to do the same on
the ONE FOR ALL 6.)
Enter the next programme
number you wish to be included
as a “favorite programme”. Then
press and release MAGIC.
Continue entering each
programme you wish to be
included as your “favorite
programmes”. After you have
entered the last programme number, press and
hold down MAGIC until the red light blinks
twice. Remember, the ONE FOR ALL 6 can hold
a maximum of 10 of your favorite programmes.
When you want to scan through
your “favorite programmes”, aim
the ONE FOR ALL 6 at your TV
and press TV then Scan and you
will automatically move through
your favorite programmes,
stopping at each for about three
seconds. Remember the ONE FOR ALL 6 must be
aimed at your TV the entire time you are using
Scan.
When you find a programme you would like to
watch, simply press the Scan key to stop the scan
feature. To continue the favorite programme scan,
press the Scan key again. The ONE FOR ALL 6
will stop automatically at the last favorite
programme.
To set up your “favorite programmes” for your Video,
Satellite or Cable Converter, follow steps 1 through 7, only
substitute the appropriate device key (VCR, SAT AUX1 or
AUX2) during steps 1 and 6.
■■■■
■■■■
17
3
4
5
6
7
SCAN
TV

To clear the favorite programmes you have set up:
Press the device key (TV, VCR,
SAT, AUX1 or AUX2). Then
hold MAGIC until the red light
blinks twice.
Press 9 9 6. Then press the
MAGIC key twice holding it
down the second time until the
red light blinks twice. The ONE
FOR ALL 6 will now perform
the Auto Scan function
whenever the Scan key is
pressed.
Notes: Favorite Programme Scan can only be set up for one
device at a time. Once you have set up your “favorite
programmes” for one device, you will not be able to use Scan
with any other device. Auto Scan may not function with devices
that did not have a programme +/- key on the original remote.
Colour & Brightness
Depending on the functions of your original remote
control, the ONE FOR ALL 6 can operate the colour and
brightness settings of your Television.
To adjust the colour:
Press MAGIC followed by Volume+
(for colour up) or Volume-(for colour
down).
To adjust the brightness:
Press MAGIC followed by
Programme+ (for brightness up) or
Programme -(for brightness down).
■■■■
■■■■
18
VOL
CH
2
1
TV
C/P

More on Teletext and Fastext
The ONE FOR ALL 6 is designed to operate the basic
functions of teletext (text on, text off, mix and hold/stop).
Symbol Title Description
TEXT Puts the Television in
the teletext mode.
TV Switches the Television
back to regular viewing
mode. On some
Televisions,this may
be done by pressing the
TEXT key several times.
MIX Shows both teletext and
regular Television
simultaneously. Also
used for subtitling. On
some Televisions this
function is accessed by
pressing the TEXT key
twice.
HOLD/ Stops changing pages.
STOP
The keys marked red, green, yellow and blue are used to
access the fastext functions of your television
■■■■
■■■■
19
Note: For a more detailed explanation of teletext and
fastext, please refer to the manual of your Television.
Remember, different Televisions control teletext and
fastext features in different ways. Not all of the teletext
functions may be available for your particular model.