One Forall URC-1666 User manual

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 1
URC-1666
Instruction manual

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 2
Introduction
Congratulations on the purchase of the URC-1660. The URC-1660 is a
replacement remote control that can be set up to control 2 devices.
- sat - Satellite Receiver, Digital Box or Cable Box
- tv - Television, Plasma- or LCD TV
The URC-1660 is preprogrammed to control your SKY+ Box (no set
up required). Simply press the “sat” device key and your will
obtain SKY+ Box functionality.
Table of Contents
THE KEYPAD 3
CODE BLINK OUT
(To find out which code is currently programmed) 7
QUICK CODE REFERENCE 7
EXTRA FEATURE
• Volume Punch-Through 8
TROUBLE-SHOOTING 9
CUSTOMER SERVICE 9
Installing the Batteries
Y ou r U RC - 1660 n ee d s 2 n e w “ AA / L R6”a l k a li n e b a tt er i e s .
1Remove the battery cover from the back of your URC-1660.
2Match the batteries to the + and - marks inside the battery case,
then insert the batteries.
3Press the battery cover back into place.
2 WWW.ONEFORALL.COM
: Television LCD Plasma Projector Rear Projector .......... 10
r
K....................
: Cable Converter Set-Top-Box DVB-C........................... 22
: Video Accessory like Media Centres AV Accessories

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 3
The Keypad
1 Power
The POWER key operates the same function it did on
the original remote control.
3 sat (LED) - device key for:
Satellite Receiver, Cable Converter, DSS / Video
Accessory (e.g.Media Centres) Personal Video
Recorder or Hard Disc Recorder.
The redLED (Light Emitting Diode) underneath the
sat key willlight up every time a key is pressed in sat
mode.
As default: when in “sat” mode your URC-1660
will be set to control your SKY+ Box.
2 tv (LED) - device key for:
Television, LCD, Plasma, Projector orRear Projector.
The red LED (Light Emitting Diode) underneath the
tv key will light up every time a key is pressed in tv
mode.
4
tv guide
This key gives you the possibility to preview the
complete tv listings.
5 box office
This key allows you to access the Box Office programs.
6 services
This key provides a range of features such as e.g.
parental controls, subtitles and favourites. For your
particular device this key may provide menu control.
7 interactive
This key provides a selection of interactive services.
8volume +/- Keys
These keys operate in the same way as the keys on
your original remote. In “tv” mode you may obtain
Colour + / - when you press and release the magic
key and then press Volume + / - .
9channel +/- Keys
These keys operate in the same way as the keys on
your original remote. In “tv” mode you may obtain
Brightness + / - when you press and release the magic
key and then press Channel + / -.
10 Directional Keys
If available on your original remote, these keys will
allow you to navigate through the menu mode of
your device.
11 select
The select key will confirm your choice in the corre-
sponding menu.
12 Mute Key
The Mute key operates the same function it did on
your original remote control.
WWW.ONEFORALL.COM 3

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 4
13 i (info) Key
This key provides information about the pro
gram you’re watching.
14 back up Key
This key allows you to go back to the previous page.
15 text
Puts the television in the Teletext mode.
16 text off
Switches the television back to regular viewing mode. On
some televisions, this may be done by pressing the text
key several times.
17 16:9
This key provides you the (16:9) wide screen
view function, if available on your original remote).
18
help
This key provides help in Sky Guide and is also
used for subtitles or audio description.
19 Transport Keys
If available these keys operate the transport functions
(PLAY,FF, REW etc.) of your SKY+ Box / Satellite
Receiver / Set Top Box / Cable Box. To prevent
accidental recording, the RECORD key mustbe pressed
twice to start recording.
19 red, green, yellow, blue
After pressing the tv key and accessing the text mode,
the keys marked red, green, yellow and blue, allow
you to access the Fastext functions of your
television. If on your original remote control these
keys are used for Menu navigation, the ONE FOR ALL
Fastext keys may operate in the same way.
20 Number Keys
The Number keys (0-9, / -/--) provide functions just like
your original remote. If your original remote has an
20 key, this function can be found under the AV key.
21 magic Key
The magic key is used to set up your URC-1660.
22 tv/sat Key
In tv mode you will obtain the AV / Input function. In
s a t m od e y ou w ill ob t a i n t h e “ T V / S A T ” o r “ T V / D T V ”
function, if available on your original remote.
Please note that the key pad description is mainly based on SKY+
Box functionality. This may differ from your particular device.
4 WWW.ONEFORALL.COM

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 5
_ _ _ _
Setting up the URC-1660
Before you start, please read these instructions carefully
Direct code set up
Example: To set up the URC-1660 for your television:
1Find the code for your device in the Code list (page 10 - 23).
Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your
device is switched on (not on standby).
2Press the tv key on the URC-1660 for the device you wish
to Set-Up.
3Press and hold down the magic key
until the red LED underneath the tv key
blinks twice (the red LED will blink once
then twice). x2
4Enter your (four-digit device code) using the number
keys. The red LED will blink twice.
5Now, aim the URC-1660 at your device and
press POWER If your device switches off, the URC-
1660 is ready to operate your device.
6Turn your device back on and try all the remote’s functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.
7 If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
WWW.ONEFORALL.COM 5
Important notes:
- If your Set Top Box is not a standard BSkyB Sky+ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2.
- Most Televisions do not switch on pressing the POWER key. Please try press-
ing a “number” key or the “TV-text off” key to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not func-
tioning properly with one of the codes, try another code listed under your
brand.
- CBL and VAC codes can be set up in “sat” mode.
- Remember to press the correct device key before operating your device.

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 6
The Search Method
If your device does not respond to the URC-1660 after you have tried all
the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the URC-1660. The Search Method
may also work if your brand is not listed at all.
Example: To search for your TV code:
1Switch your television on (not on standby) and aim your ONE FOR ALL
at your TV.
2Press the tv key on your URC-1660.
3 Press and hold down the magic key
until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice). x2
4 Press 9 9 1. The red LED will blink twice.
5Next, press POWER.
6Aim the URC-1660 at your Television. Now press CH+ over
and over, until your Television turns off (everytime you
press the CH+ key the URC-1660 will send out a POWER
signal from the next code contained in the
memory). You may have to press this key many times (up
to 150 times) so please be patient. If you skip past a code,
you can go to the previous code(s) by pressing the CH -
key. Remember to keep pointing the URC-1660 at your
Television while pressing this key.
7As soon as your television turns off, press the MAGIC key
to store the code.
6 WWW.ONEFORALL.COM
Important notes:
- If your Set Top Box is not a standard BSkyB Sky+ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2.
- Most Televisions do not switch on pressing the POWER key. Please try press-
ing a “number” key or the “TV-text off” key to switch your TV back on.
- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during step 2.

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 7
Once you have Set-Up your URC-1660, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1Press tv once.
2 Press and hold down the magic key
until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice). x2
3 Press 9 9 0. The red LED underneath the POWER key will
blink twice.
4 For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is
" 0 " .
5 For the second digit, press 2 and count all the red blinks.
I f t h ere are no b li nk s , t h e d i g it is " 0 " .
6 For the third digit, press 3 and count all the red blinks.
I f t h ere are no b li nk s , t h e d i g it is " 0 " .
7 For the fourth digit, press 4 and count all the red blinks.
I f t h ere are no b li nk s , t h e d i g it is " 0 " . Now y o u ha v e
your four-digit code.
Quick Code Reference
Device Code
sat_________________________
tv_________________________
WWW.ONEFORALL.COM 7
Code Blink out
(To find out which code is currently programmed)
Important notes:
- If your Set Top Box is not a standard BSkyB Sky+ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2 to
blink out the code programmed in “sat” mode.

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 8
Volume Punch Through
When controlling your Set-Top-Box (e.g. Sky+ Box) you normally need to
press the “tv” button first if you wish to control the volume for your
Television. The URC-1660 gives you the possibility to punch though
TV-VOLUME without pressing the tv mode key. This is only possible if you
have programmed the URC-1660 to also control your Television.
To punch through to TV volume while in “sat” mode:
1. Press and hold down the magic key until the
red LED underneath the POWER key blinks twice
(the red LED will blink once then twice).
2. Press 9 9 3.
3. Then press the tv key and the red light will
blink twice.
To cancel the „Volume Punch Through“:
1 Press and hold down the magic key until the
red LED underneath the POWER key blinks twice
(the red LED will blink once then twice).
2. Press 9 9 3.
3. Press the Volume (+) key and the red light will
blink four times.
8 WWW.ONEFORALL.COM

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 9
Problem & Solution
Problem: Solution:
Your brand is not listed in
the code section?
Try the search method on page 6.
The ONE FOR ALL does
not operate your
device(s)?
A) Try all the codes listed for
your brand. B) Try the search
method on page 6.
The ONE FOR ALL is not
performing commands
properly?
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code listed
under your brand or start the
search method over again to
locate the proper code.
Problems changing
channels?
Enter the programme number
exactly as you would on your
original remote.
The ONE FOR ALL does
not respond after
pressing a key?
Make sure you are using new
batteries and are aiming the one
for all at your device.
The red LED does not
blink when you press
a key?
Replace batteries with 2 fresh,
new “AA” alkaline batteries.
Customer Service
In the UK
E-mail : [email protected] (*)
Fax : [phone]
Tel. : [phone] (£ 0,50 per minute)
In Ireland
E-mail : [email protected] (*)
Fax : [phone]
Tel. : [phone]
(*) Just send a blank message, you’ll get auto-reply.
WWW.ONEFORALL.COM 9

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 10
T
V
T
V
TV
A.R.Systems 0037 0373 0556
Accent
0037 0556
Accusound
0860
Acer
1339
Acoustic Solutions 1667 1727 1545 1523
1865 1037
Adcom 0625
Admiral 0093 0264
Advent 1613
AEA 0037 0556
AEG 0606 1556 1037 1324
1667 1163 2239 2197
Aftron 0891
Agashi 0264
Aiko 0037 0556 0371 0035
1681 0880 0361 0191
0264
Aim 0037 0556 0753 0208
0706 0698 0634 0606
0499
Airis 1833
Aiwa 0701 1916 1505
Akai 0361 1326 0208 0371
0037 0191 0035 0753
0806 0714 0706 0698
0715 0556 0480 0264
0178 0606 1037 0473
0812 1248 1727 1308
1865
Akashi 0860
Akiba 0037 0556
Akira 2241 0753 0037
Akito 0037 0556
Akura 0037 1687 0556 0668
1667 1645 1770 1585
0264 0714 1982 1983
1363 2239 2059
Alba 0037 1037 0556 0714
0371 0668 0487 0443
1997 1865
Alkos 0035
Allstar 0037 0556
All-Tel 0865
Amitech 1849
Amstrad 0264 0371 0037 0556
1037 1324 1982
Anam 0037 0556 0650
Anam National 0037 0650 0556
Andersson 1163 1667 1585
Anglo 0264
Anitech 0264 0037 0556
Ansonic 0037 0556 0668 0292
AOC 0625 1588 2111 2214
Apollo 0473
AquaVision 1606
Arc en Ciel 0109
Arçelik 0714
Ardem 0714 0486 0633 0037
0556
Arena 0037
Aristona 0556 0037
Art Mito 1585
Asberg 0037 0556
Astra 0037 0556
Asuka 0264
ATD 0698
Atec 1606
Atlantic 0037 0556
Audiosonic 0037 0820 0556 1308
1681 0109 0714 0715
0264 0486 1983
Audioton 0486 0264
Audioworld 0698
AWA 0037 0556 0606 0108
0264 0178 0698 1681
2241
Axxon 0714
Azuki 2239
Baier 1324 2239
Baird 0109 0343 0208 0606
Bang & Olufsen 0565 0620
Base 0780
Basic Line 1667 0037 0668 0556
1037
Bauer 0698 0706 0264
Baur 0535 0195 0512 0037
0556 0191 0361 1505
BBK 1523 1645
Beaumark 0178
Beko 0714 0486 0035 0715
0037 0556 2125 0606
1308 0808 1652
Belson 2241 2032
Bennett 0556 0037
BenQ 1562
Bensten 1326 1413
Beon 0037 0556
Berthen 0668 0556
Bestar 0037 0556
Bestwell 1326
Black Diamond 0820 1037 0556 1163
0753 0587
Black Strip 0035
Blaupunkt 0195 0191 0535 0170
Blue Media 1606
Blue Sky 0037 1324 1037 0714
1709 1667 0487 0668
0715 0625 1652 0624
0556 0808 1363 1916
Boman 1324
Bork 1363
BPL 0037 0556 0373
Brandt 0625 0109 0287 0335
0343 0560
Brandt
Electronique 0287 0335
Brimax 1709
Brinkmann 0037 0556 0668 0486
Brionvega 0037 0556
Brother 0264
Bruns 0486
BSR 0361
10 WWW.ONEFORALL.COM