One Forall URC-7530 User manual

Retain For Future Reference
USER GUIDE & CODE BOOK
Universal Remote
URC-7530

QUICK SET-UP 2
QUICK SEARCH 3
INSTALLING THE BATTERIES 4
THE KEYPAD 5
INSTALLATION
Direct Set-Up 7
The Search Method 8
SET-UP CODES
Quick Code Reference 10
Televisions 11
Video Recorders 16
ADVANCED FEATURES
Controlling Colour and Brightness 19
Punch-Through 19
Teletext and Fastext 20
Sleeptimer 21
Scan 23
The AUX Key 24
Changing the Device Keys 25
TROUBLE-SHOOTING
Helpful Hints 26
Consumer Help-Line 27
Table of Contents
About Your ONE FOR ALL 3
Your ONE FOR ALL 3 Package contains:
Your ONE FOR ALL 3 Remote
Your ONE FOR ALL 3 Manual
Your manual is divided into two parts: set-up instructions and
device codes. You may need this guide again in the
future, so please be sure to keep it.
Your ONE FOR ALL 3 needs 2 new “AA/LR6” batteries.
Your ONE FOR ALL 3 can operate three devices: a Television,
a Video Recorder and a second Television or Video.

1
Device
Keys
Volume-
Rewind/
Text on
TV/VCR/Red Record/Yellow
Stop/Green
Pause/Hold
Fast Forward/
Expand
Programme-
Programme+
Power
LED
Number
Keys
Teletext Keys
Slow/Blue
Play/Text off
Volume+
Mute/Scan
Magic

Quick Set-Up
The instructions below and on the next page
can be used to quickly install your new ONE
FOR ALL.
You can use the Quick Set-Up below with the
codes listed on pages 11-18. If this doesn’t
work, try the Quick Search on the next page.
The Quick Search can also be used even if
your brand is not listed at all.
Press device key:
Press and hold
until the red light blinks
twice. Then release.
Enter
(4-digit code). See pages
11-18. The red light will
blink twice.
Aim remote at your
device and press
(or PLAY).
1.
2.
4.
3.
NOTES:
- Make sure your device is switched on.
- The instructions above are a “Quick”
set-up guide. For further explanation,
please refer to the pages within.
- Make sure you write your Set-Up codes
in the boxes provided inside the
battery compartment for easy future
reference.
or or
____
2

Quick Search
Aim your ONE FOR ALL at
your device and press
device key:
Press and hold
until the red light blinks
twice.
Press
Alternate between the
device key ( )
and until your
device turns off.
When device turns off,
press . The red
light will blink twice.
Your device is Set Up.
1.
2.
4.
5.
3.
NOTES:
- Make sure your device is switched on.
- Make sure you aim your ONE FOR ALL
at your device during “Quick Search”.
- During step 4, you may have to press
these keys many times, so please be
patient.
- If your Video’s original remote control
does not have a power key, press PLAY
instead of POWER during step 4.
ie:
or or
3

Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.
Remove the battery cover from the
back of your ONE FOR ALL 3 by
pressing down on the tab.
Match the batteries to the + and -
marks inside the battery case, then
insert the batteries.
Press the battery cover back into
place.
4
Installing the Batteries
Important notes:
- In order to avoid having to reprogram your ONE FOR ALL 3
after you remove the batteries, you will need to insert new
batteries within 5 minutes. Also it is best that you do not use
rechargeable batteries.
- On the inside of the battery compartment door you will find a
label on which to write your Set-Up codes after your ONE FOR
ALL 3 is set up for your device. Please write down your codes
for easy, future reference.
1
2
3

5
Key Function
LED LED
The LED (Light Emitting Diode) flashs red to
show the remote is working.
MAGIC Key
The MAGIC key is used to set up your ONE
FOR ALL 3 and to access special functions.
Power
The Power key controls the same function as
it did on your original remote.
Device Keys
The TV, VCR and AUX keys select the home
entertainment device to be controlled. For
example pressing the TV key allows the
remote to control the functions of your
Television, after pressing VCR you can
operate your Video Cassette Recorder and
the AUX key operates a second television or
video recorder.
Volume, Programme
The Volume and Programme keys control
the two most frequently used functions of
your Television. They operate just as those on
your original remote.
Mute
The Mute key operates the same function it
did on your orginal remote control. It is also
used to activate the Scan feature (see page
23).
The Keypad

Key Function
Number Keys
The Number keys (0-9, 10, 20) provide
functions just like your original remote, such
as direct access programme selection. If your
original remote uses one/two digit input
switching (-/-- symbol), this function can be
obtained by pressing the -/-- key, which is the
same as the 10 key. If your original remote
has an AV, key this function can also be
found under the 20 key.
Video Recorder Keys
After pressing the VCR key, the Video
Recorder keys operate the functions of your
Video Recorder. To prevent accidental
recording, the Record key must be pressed
twice to start recording.
Teletext Keys
After pressing the TV key, the top row of
the VCR keys are used to operate the main
teletext functions. The symbols below the
keys are for teletext. The text keys are used
to access the teletext functions of your
Television. Of course, your Television must be
teletext capable. For an explanation of the
teletext symbols, please refer to page 20 of this
manual. For a detailed explanation on how
teletext works, please refer to the manual
of your Television set.
After pressing the TV key, the bottom row
of the Video Recorder keys marked red,
green, yellow and blue, allow you to access
the fastext functions of your television.
Again, your television must be fastext
capable to operate these functions. For a
more detailed explanation of teletext and
fastext, please refer to the manual of your
television set.
6
The Keypad
(red)
(on)
(off)
(expand)
(hold)
(blue)
(yellow)
(green)
_
-/--

Direct Set-Up
Setting Up Your Devices
To set up the ONE FOR ALL 3 for your TV or Video Recorder,
follow the instructions below.
To set up your TV:
Find your Television code in the
Set-Up Code section (starting on page
11). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on.
Press and release your ONE FOR ALL 3’s
TV key, then press and hold down the
MAGIC key until the red light blinks
twice (the light will blink once then
twice).
Enter your four-digit TV code using the
number keys. The red light will blink
twice.
Now, aim the ONE FOR ALL 3 at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL 3 should be ready to run your
Television.
Turn your device back on and try all the
remote’s functions to ensure they are
working properly. If the functions do not
work properly, repeat steps 1-5 using
another code listed under your brand.
Write your code in the four boxes provided in the battery
compartment and on page 10 for easy future reference.
7
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0009
0087, 0093, 0363, 041
0217, 0216
0264
0516
0087
0216, 0009, 0037, 0
0037, 0274
0361, 0208, 0371,
1
2
4
5
3
Installation
Important notes:
- To set up your Video Recorder, follow the same instructions
above, only press the VCR key during step 2.
- Some codes are quite similar. If your device does not respond or
is not functioning properly with one of the codes, try another
code listed under your brand.
- If your Television or Video does not respond, follow steps 1
through 5 with each code listed for your brand. If none of the
codes listed for your brand operate your device, try the search
method described on page 8, even if your brand is not listed at
all.
- If you change programmes on your Television through your
Video Recorder, press VCR and not TV, before you use the
programme keys.
- Remember, to control your device after the ONE FOR ALL is set
up, you must press the device key first (TV, VCR, AUX).
- Write the codes for your devices in the boxes provided on page
10 and in the battery compartment for easy future reference.
____

The Search Method
If your Television or Video Recorder, does not respond to the
ONE FOR ALL 3 after you have tried all the codes listed for
your brand, try searching for your code. The Search Method
may also work if your brand is not listed at all.
Let's say you cannot get your ONE FOR ALL 3 to control your
Television.
To search for your TV code:
Switch your Television on.
Press the TV key on your ONE FOR ALL 3.
Aim the ONE FOR ALL 3 at your
Television. Press and hold down
MAGIC until the ONE FOR ALL 3’s red
light blinks twice. Then, press 9 9 1.
The red light will blink twice.
Now, alternate between TV and POWER,
over and over, until your Television turns
off. You may have to press these keys
many times, so please be patient.
Remember to keep pointing the ONE
FOR ALL 3 at your Television when you
press the POWER and TV keys.
When your Television turns off, press
MAGIC. Don't forget, press MAGIC as
soon as your Television turns off.
The ONE FOR ALL remote should now be
ready to operate your device. Turn your
device back on and try all the remote’s
functions to ensure they are working
properly. If some of the ONE FOR ALL’s
commands are not operating correctly,
try the search method again. You may be
using the wrong code.
8
Installation
Important notes:
- To search for the code for your Video follow the instructions
above only press VCR during steps 2 and 4.
- If your Video's original remote control does not have a power
key, press PLAY instead of POWER when searching for your code.
- During step 4, you may have to press these keys many times (up
to 150!) so be patient. Remember you must aim the ONE FOR
ALL at your device the entire time you are searching for your
code.
1
2
3
5
6
4