One products OTB04 User manual

Warnings
- Do not use rough textured cleaning tools or highly corrosive
cleaners when cleaning your LED Lights. These tools and
chemicals will damage the product. ONLY use a soft damp
cloth and non corrosive cleaners.
- Do not scratch the LED strips or use sharp objects on them.
- Do not permanently bend, twist, or screw through the LED
strips as this will damage the LED’s internal components.
- Do Not pull or snap with excessive force, this will damage
the product.- If the product is damaged or wires are frayed
or damaged, do not use the product. If your product arrived
in this condition, contact us for a replacement.
- Recommended temperature is between 10°F to 120°F. Do
not use in extreme heat or cold.
- Once the product has come to the end of its life please
recycle the components. Ask your local retailer for proper
disposal methods.
Packaging Contains
- 1 Piece 70cm USB cable
- 1 Piece 24 key remote controller
- 3 Pieces 4-pin connection cables
- 6-pieces 4-pin connectors
- 4 piece 50 cm strip light, 30 LED per piece, 5v,
p65 waterproof 5050 RGB LED Strips
- 1 - - 2 - - 3 -
1. Clean the surface of residue and dust
3. Place the LED strips in the location you desire, pressing
rmly and sliding your nger along the strip to ensure a
secure attachment.
Installation Steps
2. Remove the protective lm covering the adhesive backing
on your LED Strips
*IF THE STRIPS ARE NOT CONNECTED PROPERLY
THEY WILL NOT WORK OR APPEAR DULL.
*IMPORTANT:
Before beginning, look at your strips orientation. For correct
connection make sure to line-up the “+” to “+” between
strips and “ ” to “+” when using the connection cables.
See below for example:
Installation and User Manual
[phone]
www.one-products.com
Promounts
20218 Hamilton Ave,
Torrance CA 90502
OTB04

4. Connect the USB plug to any USB port, such as the one
located on the back of your TV or outlet. If no USB power
port is available, a USB to outlet adapter can be used.
*USB to OUTLET Adapter Not Included
- 4 - - 5 - - 6 - - 7 -
5. Use the included IR Remote Control to choose your
favorite color and settings
6. Enjoy your new LEDs!
LED Strip Specification
- LED Type: SMD 5050
- PCB Color: Black
- LED Color: RGB
- LED Quantity: 30 LEDs per 50cm Strip
- Voltage: DC 5V
- Waterproof Class: IP65 Waterproof
- Self-adhesive Back with Double sided Adhesive Tape
- LED Strip: 2 Piece 50cm Length
Remote Breakdown
Function
Turns the LED Lights On or OFF
Increase or Decrease the Brightness of
the LEDs when on a static color
Increase or Decrease the changing
Speed of the LEDs when in a dynamic
theme mode
16 color keys each corresponding to a
single static color. Select a color by
pressing its colored button.
Dynamic Theme mode that jumps
between three colors: red, green, and
blue.
Dynamic Theme mode that creates a
strobe-light eect
Dynamic Theme mode that fades
between 7 colors
Dynamic Theme mode that ashes
between 7 colors
Key
ON/OFF
Speed/Brightness
Static Color Options
Flash
Strobe
Fade
Smooth
Controller Specifications
- Working Temperature: 10°F - 120°F
- Voltage Supply: DC5V-24V
- Output: 3 Circuits
- Connecting Mode: Common Anode
- External Dimension: L 45 mm x W 15mm x H 2.2mm
- Static Power Consumption: <1 W
- Output Current <2 A
- Output Power: 5 V <30W. 12<72W, 24<144W
- Connecting: 4 pieces 5V 5050 RGB LED Strips
- Cable Length:
- USB Cable Length: 70cm
- 3 pieces 30 cm 4-pin connection cable