Onebee SS3204H User manual

ONEBEE TECHNOLOGY PRIVATE LIMITED 1
ONEBEE SMART SERVER Installation Guide v.1
1. Getting Started
Before you start installing make sure all accessories are packed well. In ONEBEE Smart server
comes two different packages .There are ONEBEE Smart Home pack and ONEBEE Commercial pack. Each
Pack has different kind of package lists.
Please verify the check list which is tagged in respective package kit.
In Smart Home Pack
Model No: SS3204H
S.No
Product Name
No of Quantity
1
Smart Server (4CH)
1 No
2
Door Sensor
2 No’s
3
Window Sensor(Vibrate)
1 No
4
Smart Switch
1 No
5
Siren
1 No
6
Remote Controller
1 No
7
Mouse
1 No
8
AHD Bullet Camera
2 No’s
9
Power Supply 12v 3A (For Camera)
1 No
10
Power Supply 12v 1A (For Siren)
1 No’s
11
Battery 12v 7Ah(For Server)
1 No
12
Accessories
1
BNC
2 No’s
2
RCA
2 No’s
3
DC (Male |Female)
2 Sets
4
1+3 Cable(10Mtr with one side bnc and dc)
1 Set
5
1+3 Cable(20Mtr with one side bnc and dc)
1 Set
6
Server Wall Mount Screws
2 Set
7
HDD Screws
1 Set
8
Sensors Batteries
1 Kit
Note: The materials in the above check list may differ according to the rules by authorized dealer without any
information.

ONEBEE TECHNOLOGY PRIVATE LIMITED 2
In Commercial Pack
Model No: SS3204C
S.No
Product Name
No of Quantity
1
Smart Server (4CH)
1 No
2
Door Sensor
1 No
3
Window Sensor(Vibrate)
1 No
4
Smart Switch
1 No
5
PIR Motion Sensor
1 No
6
Siren
1 No
7
Remote Controller
1 No
8
Mouse
1 No
9
AHD Bullet Camera
2 No’s
10
Power Supply 12v 3A (For Camera)
1 No
11
Power Supply 12v 1A (For Siren)
2 No’s
12
Battery 12v 7Ah(For Server)
1 No
Accessories
1
BNC
2 No’s
2
RCA
2 No’s
3
DC (Male | Female)
2 Sets
4
1+3 Cable(10Mtr with one side bnc and dc)
1 Set
5
1+3 Cable(20Mtr with one side bnc and dc)
1 Set
6
Server Wall Mount Screws
2 Set
7
HDD Screws
1 Set
8
Sensors Batteries
1 Kit
Note: The materials in the above check list may differ according to the rules by authorized dealer without any
information.

ONEBEE TECHNOLOGY PRIVATE LIMITED 3
Model No: SS3204CS
S.No
Product Name
No of Quantity
1
Smart Server (4CH)
1 No
2
Door Sensor
1 No
3
Window Sensor(Vibrate)
1 No
4
Smart Switch
1 No
5
Shutter Sensor
1 No
6
Siren
1 No
7
Remote Controller
1 No
8
Mouse
1 No
9
AHD Bullet Camera
2 No’s
10
Power Supply 12v 3A (For Camera)
1 No
11
Power Supply 12v 1A (For Siren)
2 No’s
12
Battery 12v 7Ah(For Server)
1 No
Accessories
1
BNC
2 No’s
2
RCA
2 No’s
3
DC (Male | Female)
2 Sets
4
1+3 Cable(10Mtr with one side bnc and dc)
1 Set
5
1+3 Cable(20Mtr with one side bnc and dc)
1 Set
6
Server Wall Mount Screws
2 Set
7
HDD Screws
1 Set
8
Sensors Batteries
1 Kit
Note: The materials in the above check list may differ according to the rules by authorized dealer without any
information.

ONEBEE TECHNOLOGY PRIVATE LIMITED 4
2. Un-Packing the smart server:
Picture 1 refers server hardware’s and its purpose
1. Server Front Cover(Door) with locking system, 2. Power Socket, 3. HDD Cables, 4. Remote Controller and Locker
Key, 5. Ground Earth, 6. HDD Screws, 7. Inverter, 8. Battery Probe
3. Connecting point view
Picture-2 shows the server ports and connecting the resources
1
2
3
4
5
6
7
8
Picture-1
1
2
3
4
5
6
7
8
9
10
Video Input
Audio Output
VGA
OUT
Video Input
HDMI OUT
RJ45 Ethernet
Audio Input block
USB Port(Mouse/Pen drive/Wi-Fi Dongle)
Antenna Port(Sensor)
GSM Antenna
SIM Tray
Picture-2
ON
EBE
E
TEC
HN
OL
OG
Y
11
MIC

ONEBEE TECHNOLOGY PRIVATE LIMITED 5
4. Fixing the panel (Wall Mount)
5. Connecting the Accessories
Before you connecting the server accessories we’re highly recommended PLEASE PULL OUT POWER
SOCKET FROM POWER SOURCE and DISCONNECT the BATTERY PROBE if it connects.
Please refer PICTURE -2 for respective connecting accessories.
ONEBEE TECHNOLOGY
Top of Panel
Bottom of Panel
Wall Mount Screws
Note: The Given Screws are
threatening type, Use proper
spanner for fixing. DO NOT
HAMMER.

ONEBEE TECHNOLOGY PRIVATE LIMITED 6
5.1 Connection for Video Input
Recently ONEBEE SMART SERVER panel supports RCA for video input, In this case we have used RCA
with female dc pin for power over video cable(1+3).
5.2 Connection for Camera
Picture-3
ONEBEE TECHNOLOGY
Camera Side BNC
Server Side RCA

ONEBEE TECHNOLOGY PRIVATE LIMITED 7
After Crimping RCA and Female DC
5.3 Connection for Transceiver Antenna (for Sensor)
In this step the wireless transceiver pin should be placed well in panel. And transceiver should be placed
in an open air and respective height. Or it may causes coverage issues between the sensors
Picture-4
Camera Side BNC
Server Side RCA
Sensor Antenna Port
Picture-5
ONEBEE TECHNOLOGY
ONEBEE TECHNOLOGY

ONEBEE TECHNOLOGY PRIVATE LIMITED 8
5.4 Connection for SIM and GSM Antenna
In this picture, it shows the placement and position for SIM. And near GSM antenna is placed. Make sure
about the network coverage that is available in your surroundings. Carefully insert the SIM.
5.5 Connection for Hard Disk
Picture-7 shows fixing the hard disk in top of the board.
SIM and GSM
Antenna
Picture-6
ONEBEE TECHNOLOGY
Picture-7

ONEBEE TECHNOLOGY PRIVATE LIMITED 9
5.6. Connection for Battery
This picture shows how to connect battery inside the panel. In this picture the Inverter (refer Picture-1)
has two connection probes. Black refers the Negative of battery and Red refers the Positive of Battery.
5.7. Final Connection diagram

ONEBEE TECHNOLOGY PRIVATE LIMITED 10