OPERATING INSTRUCIONS
-4-
lid IS and
spin
OPERATING INSTRUCTIONS
Spin Shower Rinse/Water saver rinse
1. This is recommended for less soiled clothes / for water saving.
2. This is to be performed after spin
drying process 1 & 2.
3. Set the water selector to spin side.
4. Open the water tap and allow the
water to flow to spin tub. Please
ensure that the spin tub is not
rotating and water tap is opened
partially.
5. After about 2 min close the tap.
6. Set the spin timer for 2 min.
Note : Do not leave the water tap open while the spin tub is rotating.
This only can waste the water.
Connect the inlet hose to the water selector and set to wash side. Turn the tap valve
and adjust the water level according to the requirement.
Set the wash-drain switch to wash and select wash program soft or normal or strong
according to the type and weight of the clothes.
2.
3.
4.
