OnLyee CR1018i User manual

1. Press button once, display starts
flashing.
2. Press button to set the hour.
press button to set the minute.
3. Press button or button to save time or
wait for another 10 seconds to confirm automatically.
To change 12H/24H time format
Hold press button to change 12H/24H time format.
- 02 -- 01 -
Chapter 1 LOCATION OF CONTROLS Chapter 2 POWER RESOURCES
1. Pull out of the insulator at battery compartment to activate
CR2032 coin cell backup battery.
NOTE: Backup battery(included) doesn't support time display but can back up time &
alarm setting.
2. Connect the adapter line to DC jack , then plug into a 100~240V
AC wall power outlet.
Chapter 3 TIME SETTING
TIME SNOOZE
TIME
HOUR
MIN
TIME
DIMMER HOUR
MINUTE
SNOOZE ALARM 1 ALARM 2 ALARM
OFF
VOLUME
DST
TIM E
12H/24H
12345678910
AM
PM
DST
11
12
13
14
17
18
19
20
21
1. Dimmer Button
4. Time Button
7. Alarm 2 Button
10. Red Indicator Light
13. DST Indicator
16. Alarm 1 Indicator
19. DC Input Port
22. BUZZ/VIB Switch
2. Hour Button
5. Snooze Button
8. Volume Button
11. AM Indicator
14. Ring Indicator
17. Alarm 2 Indicator
20. USB Output Port
23. Vibrator Jack
3. Minute Button
6. Alarm 1 Button
9. Alarm OFF Button
12. PM Indicator
15. Vibrator Indicator
18. Speaker
21. Back Up Battery
15
16
23
BUZZ
BUZZ/VIB
VIB
22
Version 2.0
CR1018i Alarm Clock with USB Charger
CREATE YOUR PERFECT SLEEP ENVIRONMENT
Contact our experts
[email protected]
Mad e in Chi na
Http://www.onlyee.com

1. Press button, the alarm indicator will light up,
the display starts flickering.
2. Press button to set the hour,
press button to set the minute.
3. Press button or button to save alarm
time or just wait for another 10 seconds to confirm automatically.
Setting ALARM 2 is the same as ALARM 1.
Set Alarm Ring Volume
Repeat button to adjust the alarm ring volume for your
preference.
There is 7 levels, The sequence is as follows:
03-04-05-06-07-06-05-04-03-02-01-02........
Turn off Alarm
When alarm goes off:
1. Press button to temporarily turn off alarm for 9
minutes. Alarm will ring every next 9 minutes.
2. Press button to turn off alarm for 24 hours.
The alarm indicator or is still on, which means
alarm is still activated and will ring after 24 hours.
- 05 - - 06 -
- 04 -- 03 -
Chapter 4 ALARM SETTING
1
1
2
Chapter 6 USB CHARGING
Plug charging cable into device such as phone or tablet.
Device can charge both your phone or tablet at the same time.
The maximum charge current is 1 Ampere.
Chapter 7 DIMMER
Hold press button to switch DST function.
DST indicator will turn on.
Hold press button again to turn off DST function.
DST indicator will turn off.
Chapter 5 DST
ALARM 1
HOUR
MIN
ALARM 1 SNOOZE
VOLUME
SNOOZE
ALARM OFF
VOLUME
VOLUME
Chapter 9 Vibrator
DIMMER HOUR
MINUTE
SNOOZE ALARM 1 ALARM 2 ALARM
OFF
VOLUME
DST
TIME
12H/24H
DIMMER
Repeat button to adjust the brightness of display for
your preference.
There is 8 levels, The sequence is as follows:
04(default)-05-06-07-06-05-04-03-02-01-OFF-01-02........
When the OFF level is selected, the display will be completely turned
off and the Red Indicator light will turn on. Then if any button is
pressed again, the display screen will be restored to 04 default level
instead of complete off state, and the Red indicator light will also be
turned off.
NOTE: Hold press the DIMMER button, the display will be completely
turned off directly.
DIMMER
hold press or repeat
DIMMER HOUR
MINUTE
SNOOZE ALARM 1 ALARM 2 ALARM
OFF
VOLUME
DST
TIME
12H/24H
Chapter8REDINDICATORLIGHT
1.Whenthealarmgoesoff，theRed Indicator Lightwillflash
2.WhenthebrightnessofdispalyissettoOFF,theRed Indicator
Lightwillstayon
1
Cancel Alarm
1. Hold press button to turn off alarm1 and alarm 2
permanently. And corresponding indicator and will
turn off.
2. Hold press button, just turn off
alarm 1 permanently. indicator will turn off.
3. Hold press button, just turn off
alarm 2 permanently. indicator will turn off.
4. If alarm 1 goes off, then hold press or ,
just turn off alarm1 permanently. indicator will turn off .
5. If alarm 2 goes off, then hold press or ,
just turn off alarm 2 permanently. indicator will turn off.
2
1 2
ALARM OFF
ALARM OFF
ALARM OFF
ALARM 1
1
ALARM 2
2
ALARM 1
ALARM 2
Red Indicator Light
Insert the vibrator plug into the vibrator jack of the machine.
If you do not insert the vibrator plug into the vibrator jack of the
machine, no matter you slide the switch button to VIB or BUZZ/VIB, the
clock will have the buzz sound when alarm goes off.
A. Wake up only by bed shaker
set alarm on — toggle switch to VIB — indicator will light up.
B. Wake up only by buzzer sound
Set alarm on — toggle switch to BUZZ — indicator will light
up
C. Wake up by both Vibrator and Buzzer sound
set alarm on — toggle switch to BUZZ/VIB — and
indicator will light up.
BUZZ
BUZZ/VIB
VIB
BUZZ: Speaker will ring
BUZZ/VIB: Speaker will ring
Vibrator will vibrate
VIB: Vibrator will vibrate