ONLYWELL WT1207 User manual

wifi-controller
WT1207/WT1208SMART WIFI CLOCK
USER MANUALONLYWELL TECHNOLOGY LIMITED

WT1207product pictureC/F KeyFixed PinholeWIFI KeyReset KeyBack button Description1

WT1208product pictureBack button Description定位孔WIFI键Reset键2NNote: The operation methods of the 1208 and 1207 models are the same, and the 1208 models do not have the LCD screen display function.

LED Display description1.Date display2.Date format: MD /DM switch display3.Temperature: °C/°F switch display4.WIFI signal indicator icon5.DST icon6.Low battery icon7.Week: 7 language switching display72456133D

4Quick setup guideStep 1 ：Insert the battery or press the "WIFI" button to turn on the WIFI powerThe LED light starts to flash.Step 3: Find the network of "WIFIClock_xxxx", press the "Connect" buttonStep 5: Press “Network” to enter the network menu.Wait for the device to scan for connectable router signals.Step 7: Enter the password for this route and press the "Connect" buttonStep 2: Open the WLAN settings menu of your phone or computeStep 4: open the browser, enter in the address bar: "192.168.4.1". Example: Chrome, FirefoxStep 6:Pull down the "Route" list and look for the route name to be connected.If not found, you can click the "Refresh" button or manually enter it in "AddRoute"Step 8: Wait for the "Network Connection Succeeded" promptStep 9: Press and enter the "Time" settings menuStep 10: Pull down to select the time zone and press the “Settingtime” button to complete the setting.Alkaline battery，AA*3This may take 10 seconds or more

Insert the battery or press the "WIFI" button to open the WIFI power supply and WEB service.The WIFI icon starts to flash, indicating that the network is being connected.When the WIFI icon is displayed long, it indicates that it is connected to the network.WIFI is not connected to the network, the WIFI icon will disappear.When the WIFI power is turned on, press the “WIFI button to turn off the WIFI power and WEB service.Press the “WIFI” “Reset” button or press the “WIFI” button to install the battery and restore the factory settings.Press "C/F" to convert the temperature unit °C/°F1、2、3、4、Note:Insert the battery and turn on the WIFI power for 10 minutes.Press the “WIFI” button to turn on the WIFI power for 5 minutes.Basic operationLED flashing: WEB service is already open, WIFI is connecting route,LED is on: WEB service is already on, WIFI is connected to routeLED off: Turn off WIFI power and WEB service.LED flashes quickly: Restore factory settings.The LED flashes once every 10 seconds: The battery is low.LED status1、2、3、4、5、5

Automatic timing: It is randomly open every hour between 19:00 and 22:00 every day. After the calibration is successful, it will not be calibrated again until after 19:00 on the second day.Automatic stop seconds mute: The default is 22:00-6:00, the default setting can be changed through WEBTemperature range： -9.9℃~50.0℃Other1、2、3、6This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi
fications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
FCC Statement

WEB Service Manual：1、open your phone WLAN pagePress and hold the WIFI button on the device for 2 seconds to turn on the WLAN function of the device.Open the "WLAN" interface and find the WLAN of"WIFIClock_xxxx"7

SystemTime
Main
NetworkRouter: AddRouter： PassWord：RefreshConnection2、Main MenuLog in to the background homepage automati-cally, or open the browser manuallyThe battery level of this clockUpdate on : Last time to calibrate the clock (Greenwich Mean Time)The setting of the "Time" menu is displayed here.3、Network MenuRouter: Pull down to view all the routes that can be connected.Password：Enter the login password for the route.Refresh: If there is no required route name in the "Router", Press the button to search for the router signal again.AddRouter: If there is no required route name in the "Router", you can manually enter the name of the route here, which will take precedence over the "Router" selection.Connection: After selecting the route and entering the correct login password, press the button to connect.Note: After pressing this button for a while, there will be a message that the connection is successful or failed, please pay attention.8

In order to avoid affecting users,the second hand will stop running during the set time period.default time： 22:00 ~ 6:00Use the NTP service provided by the customer, if not input, use the default NTP Service“Setting Time” button : Press the button to save the setting result to the clock4 、Time MenuTime Zone: Drop down to select 170 cities and regional time zonesDST: Default selection “Auto”If DST is cancelled, please select “OFF”If DST regulations change, select the Custom mode.Custom-1: Starts and ends by week. Example: DST starts at 2:00 on the last Sunday in March. DST Stop at 3:00 on the First Sunday in November. then : DST Start : March Last Sunday 2:00 DST Stop : November 1st Sunday 3:00 Custom-2: Starts and ends by date. Example: DST starts at 2:00,25-March , and DST stop at 3:00,31-October then;DST Start : March 25 2 :00 DST Stop : October 31 3:00 This product does not have this featureTime Format : This product does not have this featureDate Format : Switch MM/DD or DD/MM display .9

Please enter the old password and the new password, and press the "Setting" button to change the login password.New password requires a minimum of 8 charactersPressing the "Reset" button will erase all the records and return to the default settings.Please be cautious!5 、System Menu10

CORPORATE NAME：ADD:Tel : [phone]Web：http://onlywell.com.cnShenzhen Henghuida Electronics Co., Ltd.VIDEO TUTORIALFloor 3, Building A, Yongchuang Science and Technology Park, Fenghuang Road, Dalang Street, Longhua New District, Shenzhenhttps://youtu.be/_TF7K2v5zJcVideo tutorial