Onn AAABLK1000009771 User manual

CD/Bluetooth Boombox
We’d love to hear from you. Scan with you Walmart
app and let us know what you think.
PRODUCT GUIDE
Model: AAABLK100009771
May 5, 2020_V2

May 5, 2020_V2
Need help?
We’re here for you every day
from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat Source such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC Warnings
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should
remain readily operable during intended use. In
order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected
form the mains socket outlet completely.
• Caution marking is located at the rear or bottom of the
apparatus.
• WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain, moisture,
dripping, or splashing.
• CAUTION: Use of controls or adjustments or
performance of procedures other than those specified
may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
• WARNING: Do not place this unit directly onto furniture
surfaces with any type of soft, porous, or sensitive
finish. As with any rubber compound made with oils,
the feet could cause marks or staining where the feet
reside. We recommend using a protective barrier such
as a cloth or a piece of glass between the unit and the
surface to reduce the risk of damage and/or staining.
• CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
• WARNING: Shock hazard - Do Not Open.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Keep new and used batteries away from children. If the
battery compartment does not close securely, stop
using the product and keep it away from children.
• WARNING: DO NOT INGEST BATTERY, CHEMICAL
BURN HAZARD. If you think batteries might have been
swallowed or placed inside any part of the body, seek
immediate medical attention.
• If the coin/button cell battery supplied with this
product is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
• Completely replace all old batteries with new ones.
• Batteries should be recycled or disposed
of as per state and local guidelines.
NOTE : Exposure to certain lasers can cause
eye damage.
Information and Safety Instructions

May 5, 2020_V2
Overview
Repeat
Press to repeat the
current track. Press twice
to repeat the entire
album.
Features
• Bluetooth Wireless
• Wireless range: 60 ft.
• CD player: CD, CD-R/RW
• Programmable tracks
• FM radio (DLL)
• Top-load disc player
• Analog volume control
• Built-in stereo speakers
• Negative LCD display with
white backlight
• 3.5mm audio input
• AC power: built-in AC power
cable
• DC battery power: requires 6 C
batteries (not included)
Source Switch
Switch between CD/Line In, OFF, FM
radio and Bluetooth.
Tuning
In radio mode, turn
to adjust the AM or
FM radio station.
Volume
Turn to adjust
the volume.
3.5mm Audio Line
Input
Skip/Search
Press to skip between
tracks on a loaded CD.
Press and hold to
search through the
current track.
Pair/Play/Pause
Press & Hold to
begin pairing a
Bluetooth device.
Press to play or
pause the current
track.
CD Door (top)
LCD Display
Stop
Press to stop a
CD during
play.
Program
Press to program the loaded CD to
play tracks in a specified order.
Requires 6 C batteries (not included).Plug the AC power cord into a standard power
outlet.
Power and Batteries

May 5, 2020_V2
Bluetooth
Pairing a Bluetooth Device for the
First Time
1. Slide the Source Switch to Bluetooth Mode.
The letters “bt”will flash on the display.
2. If the unit does not automatically begin to
pair, press and hold the Pair button.
3. Using the native controls on your Bluetooth
device, select the onn. CD Boombox in your
Bluetooth settings to pair.
4. When pairing, remain within 3 feet of the
unit if your device requests a password,
enter the default password 0 0 0 0. Refer to
the user’s manual for your specific device
for instructions on pairing and connecting
Bluetooth devices. When successfully
paired, the display will stop flashing.
5. After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
6. If your device should become unpaired,
follow the above steps again.
7. If any pairing issues should occur, unpair
the unit on your Bluetooth device and
follow the above steps again.
CD
Radio
Playing the Radio
1. Slide the Source Switch to FM radio mode.
2. Adjust the Tuning dial to tune the radio.
An FM wire antenna is built into the radio. To
improve radio reception, adjust the FM wire
antenna on the boombox.
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the CD door and place a CD in the
boombox, label side facing up.
2. Close the CD door.
3. Slide the Source Switch to CD mode.
4. Press the Play/Pause button to begin
playing the loaded disc.
Programming a CD
1. Press the Stop button to stop a loaded CD.
2. Press the Program button.
“01” will blink on the display.
3. Press the Skip/Search buttons to select a
track.
4. Press the Program button to add the
selected track to the program.
5. Repeat steps 4 and 5 to program up to 20
tracks to play in a specified order.
6. Press the Stop button to cancel a program.
Using the Line In
3.5 mm audio input cable (not included).
1. Plug one end of a 3.5mm audio input cable
into the Line In input on the side of the unit,
and plug the other end of the cable into
the audio output/headphone jack on an
MP3 Player or other audio Source.
2. Turn ON the speaker using the Power
button.
3. Turn ON the connected audio device using
it’s Power button.
4. Slide the Source Switch to Line In.
5. Select and begin playing audio on the
connected audio device. Audio played
through the connected device should now
be heard through the speakers.
Playing Audio Wirelessly
1. To select, play, pause or skip a track, use
the native controls on the connected
Bluetooth Device, or press the Pair/Play/
Pause or Tun/Skip/Search buttons.
2. Audio played through the connected
Bluetooth device will now be heard through
the speakers.
3.5mm Audio Input
Note: This unit has a Bluetooth receiver. You can
connect your Bluetooth audio device such as
smartphones, mp3 players, tablets, computers,
etc. to this unit via Bluetooth and stream music.
This unit does not have a Bluetooth transmitter.
Therefore headphones or earbuds cannot be
connected to this unit via Bluetooth.
This unit has an audio input. You can connect
your audio source device such as smartphones,
mp3 players, tablets, computers, etc. to this
unit via line-in and stream music. This unit does
not have an aux output, it only has aux input.
Therefore headphones or earbuds cannot be
connected to this unit via Line in (aux input).