Onnet technologies konnect plus User manual

www.onnettechnologies.com

2
is the registered trademark of Onnet Technologies (India) Pvt. Ltd All the
products and product names mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the whole product as integration,
including its accessories and software, belongs to Onnet Technologies (India) Pvt. Ltd
Without the express permission of Onnet Technologies (India) Pvt. Ltd, any individual
or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
All the photos and product specifications mentioned in this manual are for references only.
As the upgrade of software and hardware, there will be changes. And if there are changes,
Onnet Technologies is not responsible for informing in advance. If you want to know
mo r e ab o u t ou r pro d u ct i n for m a t ion , ple a s e vi s i t ou r we b s ite a t
www.onnettechnologies.com
Copyright Statement

3
1. The device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
2. This device may not cause harmful interference, and this device must accept any interference
received, including interference that may cause undesired operation.
3. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body.
4. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
5. Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
FCC Caution
This product has been tested in typical configuration by Ecom Sertech Corp and was found to
comply with the essential requirement of “Council Directive on the Approximation of the Laws of the
Member States relating to Electromagnetic Compatibility” (89/336/EEC; 92/31/EEC; 93/68/EEC)
CE Statement of Conformity

4
Dear Customer,
Thank you for buying another innovative product from Onnet Technologies. We assure you of an
unparalleled and exceptional experience with our Onnet product. This product offer the best of USB
/Print server applications.
It is yet another example of Onnet's commitment to get the latest and most innovative technologies to
you for your experience. All Onnet products come with an extensive service support and a 1 year
warranty. Each Onnet product is subjected to a stringent Quality Control program at our assembly plant.
However, in the rare event that your device does not behave as it is meant to, please ensure that you log
on to our website www.onnettechnologies.com and use the “Register” tab for the first time , choose
the Product Registration tab and simply follow the tab menu to register your product and user details
with us. You must enter the serial number of your device that is printed on the box for our support team to
get back to you immediately. You will receive a confirmation mail after you have registered your product
successfully.
Sincerely,
Onnet Technologies (India) Pvt. Ltd.
Chapter-1 Introduction

5
Welcome to the wonderful world of Onnet Technologies. “Anytime, Anywhere …”
You are now successfully registered with us and will now be able to access our online support center for
software upgrades, troubleshooting and receive regular updates on your email for product launches,
special offers and much more.
1.1 About Onnet
Onnet Technologies is a Green Initiative inspired company. Our core focus is to bring together
innovative energy efficient wireless network routers for the small office and home office users
as well as Energy Efficient power and switching equipments for the outdoor network in the ICT
industry .
Onnet also intends to offer Green Alternate Energy Technology for us in rural micro telecom
environments . Headquartered at Ahmedabad Gujarat, Onnet Technologies aims to make the
best of one of the most progressive business environments offered in the country.

6
WEE Directives & product disposal:
All the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or return to the supplier for disposal.
The state of the art assembly unit for integrating the latest technology is also located at Gandhinagar.
With one of the youngest pool of entrepreneurial skills available in the country, Onnet Technologies is
revolutionizing the knowledge and technology based growth engine. Onnet Technologies objective is
to contribute to the eventual energy security of the country.
Trademarks:
Microsoft, windows Xp, windows VISTA and windows 7 are register trademark of the Microsoft
Corporation. All other brand and product names mentioned herein may be registered trademarks
of their respective owners. Customers should ensure that their use of this product does not
infringe upon any patent rights. Trademarks mentioned in this public

7
Table of Content
Environment setup.....................................................................................................08
Introduction................................................................................................................09
Hardware installation .................................................................................................12
Installation Konnect+ networking USB server Utility..................................................13
Installation Konnect+ networking USB server featured functions..............................20
Connect automatically for printing .............................................................................20
Connect this device when application starts..............................................................21
Auto disconnect printer/MFP/storage device.............................................................22
Create a shortcut on your desktop ............................................................................24
Device properties.......................................................................................................25
Control menu .............................................................................................................26
Configuration with the utility.......................................................................................27
Configuration with web-based UI...............................................................................29
Removing Konnect+ networking USB server utility from your system.......................32
MFP-Printer/LPR printer compatibility list..................................................................33
The Manual for:
• Konnect+ networking USB server 100M
(Support Multi-Function Printers & USB devises)

The picture above depicts a sample household network USB device use environment.
To setup the devise, simply plug it into the home/office network under the same router
and power it on. Then it could be shared by all the computers on the same network
8
Environment Setup

Thanks you for purchasing this Konnect+ networking USB server that allows any
networked computer to share a USB printer. USB devises. It complies with USB 2.0
specifications and is backward compatible with USB 1 (and provided an auto-sensing
Ethernet port that works with either 10Base-T, 100Base-T or 1000Based-T networks.
This until also supports multiple protocols and multiple operating systems. The built-in
web management feature provides more convenience by allowing the user to configure,
monitor and even reset the USB server via a web browser.
The new USB server enables an external hard drive, flash drive, memory card reader,
USB webcam, USB speaker, USB multifunction printer ( MFP), or other USB devises to
be shared on a network, with the versatility afforded by the USB server, user can now
enjoy their favorite multimedia content stored on their computer from anywhere in their
home or office use. When connecting USB server to a wireless router, users can access
their multimedia content and USB devices wirelessly. The UPnP technology enables
quick and easy setup and configuration in a windows environment.
We hope that you will enjoy using your USB server/print server and find it to be a useful
solution.
Please read this user manual carefully before using. All information on this booklet is
subject to change without notice due to technical reasons.
9
Introduction

System requirements:
• Windows 2000/XP/2003/VISTA, Windows 7
• Mac OS X 10.2 or later (Only support printer)
• Device with a USB connection.
Features
• Easily connect your USB printer, USB devices to a network
• Allows multiple computers to share USB printer, USB device on the network
• Print from any computer on your local network
• Support DHCP client and multiple network protocols
• 10Base-T/100Base-T
• Auto sensing
• 10Base-T/100Base-T/1000Base-T auto sensing (for 1000M LAN model)
• Supports web management software.
Package contents : For Networking USB server
• Onet Konnect+ networking USB server
• Networking cable
• Power adapter 5V
• Installation CD
• User manual
10

Notice:
1. Do not use the network USB server in the extreme hot, cold, dusty or humid
environment.
2. Prevent friction with objects or it may lead to surface abrasion or hardware damage.
3. Avoid the hub falling down from a high place, or it may damage the hardware inside.
4. Do not use any alcohol, thinner or benzence to clean the device.
5. Please do not use power adaptor with different voltage rating. It will damage or burn
the network hub.
6. Always check I the device driver is required by some USB peripherals such as
printers, webcams etc. please install the device driver is require on your computer
first.
7. Some USB devices require a direct connection to PC for optimum performance.
8. The network hub provides 5V power supply which is enough for most USB devices
but the power can be in short supply when connecting too many devices like 2.5'
external hard disk or .connecting other devices with high power consumption
simultaneously. Please attach their self-power supply in order to co-work with the
network hub properly.
9. Make sure your network is working and the network cable is connected to the network
hub as well.
10. You may need to configure the IP address of the network before accessing any USB
devices connected with the hub. Please read the user manual
You can reset your network USB server to default setting by press the “RESET'
button on the back side of the hub.You can use this solution if you forget your
password.
IMPORTANT NOTE:
11

1. Make sure your network is working properly.
2. Connect the USB printer or other USB devices to the USB ports on the network USB
server
3. Make sure all the driver of the devices connected with the network USB server is
installed on your computer properly,
4. Connect the network USB server to the router or Ethernet switch/hub or bridge it
enclosed network cable.
5. Plug in the power adapter to the network USB server.
6. Install the driver of the network USB server (Please find instructions in the next
section).
12
Hardware Installation

13
Installation Konnect+ networking USB server Utility:
• To start the installation, please double click
Setup.exe.
• And then click USB Server for Windows from
auto run setup cover page.
• The installer will automatically install the program.
• When done, Select YES, I want to restart my
computer now and click FINISH to reboot your
computer.

• After the installation completes, a shortcut will be
created on your Desktop.
System Firewall
When you start the program for the first time, your
windows OS will prompt to firewall Access. Please
make sure you unblock the software or grant it access,
otherwise the program will not work correctly.
Windows XP Firewall Access Alert
Please make sure you “Unblock” the program.
14

Main Dialog Box
Once you have start up the program and grant it
access through the firewall, you will see this main
dialog box.
The main dialog box is considered of Control Menu
(File, Option, View and Help), a tree view in the middle
that displays a list of all the server and devices
discovered on the network, a Search button to get the
current status of all USB Servers and devices, and a
button that toggles between Open Web Page and
Connect Device depending on the node you select
on the tree view. The Open Web Page button toggles
to Connect Device when a device is highlighted.
15
Status of USB Server and Devices
The device might be in one of the following states and there are different things you can do
with it in each of the states. Each status is respectively by a specific icon.

Accessing a USB Device
To connect to a USB device, please select it on the
tree view and click on Connect Device button or
double click on it. This process might take a few
seconds up to a minute, depending upon complexity
of the device.
Then you can operate a connected USB device as if it
is connected to your PCs USB port directly.
If you select a connected device on the UI, you can
see the Connect Device button is changed to
Disconnect Device:
Clicking on this button releases the selected device
for other users. Once you see the icon turns back, the
device has been disconnected and other users will
then be able to connect to it.
This operation is exactly like when you unplug a
USB device from your PC`s USB port.
16

Search
When you are in need of knowing the status of all the
servers and devices immediately, use the Search
button.
Clicking on the Search button triggers the program to
immediately poll the network for the status of all the
servers and devices. The result will be updated to the
tree view.
17
Device Control Request
To request other user to release a Network USB
device, use the Request Disconnect Device option
from the right-click menu.
Of course, this option would only be enabled when the
device is currently occupied by someone else. The
current occupied user will see this message pops up.

Clicking on YES to release the device if you are done,
click on Cancel if you are still using it.
The requesting user will see this message if the
occupying user releases the device:
Then the device will be free to connect:
18
If the occupying users click on CANCEL when
received the request, requesting user will see this
message instead:
The 3 minute rule is to prevent request spamming.
That is, to prevent the current occupying user from
being flooded with disconnect request in a short
period of time.

19
System Tray Icon
When minimized to system tray, the Konnect+ networking USB server Utility will still be
running. Right Click on the icon brings up a menu of operations you can still do.
As you can see, you can still do Search and Connect. Search is the same but to connect a
storage device, move your mouse to the “Connect” option and a list of Network USB
Devices will show up. Simply click on the device you would like to connect.
When connect, a check mark will appear right next to the device on the device list. To
disconnect the device, simply click on it again.
“Open Networking USB Server” option brings up the main GUI.
“EXIT” option terminates the utility entirely.

Connect Automatically for Printing
This is another one of very convenient functions. What
this function does it that when you send a printing task
to the printer, it detects this printing task and
AUTOMATICALLY connect this printer to print out the
document. When the printing task is done, the printer
will then be AUTOMATICALLY disconnected so that
other user can use it.
The user no longer has to manually connect and
disconnect the printer.
NOTE: This function will be enabled for printers or
MFPs that has been installed and used on your
PC. For a new printer/MFP, please make sure you
have installed it(has been connected via USB port
or via USB Server Software and worked
correctly)on your PC first.
20
Konnect+ networking USB server Featured Functions
Table of contents
Popular Server manuals by other brands

SIELCO SISTEM
SIELCO SISTEM SS 8014 user guide

IEI Technology
IEI Technology AVL-3000 user manual

Intergraph
Intergraph TD-x10 Setup System reference guide

Supero
Supero SUPERSERVER 2028TP-DC0R user manual

Supermicro
Supermicro SuperServer SSG-620P-ACR12H user manual

Symantec
Symantec Backup Exec 3600 R2 Getting started guide

Barracuda Networks
Barracuda Networks Server user manual

Supermicro
Supermicro 8050 user manual

Silicon Graphics
Silicon Graphics 1200 user guide

Lenovo
Lenovo ThinkServer RD440 User guide and hardware maintenance manual

Supermicro
Supermicro SUPERSERVER 6013P-i user manual

LG
LG Cloud Device CL601W owner's manual