ONWOTE Security NVR Kit Instruction manual

1
1. Safety Caution
2
2. NVR Connection Diagram
3
3. Wizard Setup
4
4. Play Audio & Name Camera
6
How to Play Audio
6
Name Your Cameras
6
5. Access System Using Mobile Device
7
6. Access System Using PC Client Software
11
7. Access System Using Internet Explorer
20
8. Recording Setup
22
Set Motion Area
22
Normal Recording
23
Motion Recording
23
Scheduled Recording
24
9. Video Playback
25
10. Video Backup
27
11. Mobile App & E-mail Notification
33
12. Human Body Detection Alter & Record
38
13. Reset Password
42

2
Safety Caution
Please read this user manual carefully to ensure that you can use the device correctly and safely.
This manual is suitable for many models.
All examples and pictures used in the manual are from one of the models for reference purpose.
There may be several technically incorrect places or printing errors in this manual. The updates will
be added into the new version of this manual. The contents of this manual are subject to change
without notice.
This device should be operated only from the type of the power source indicated on the marking
label. The voltage of the power must be verified before using the same. Kindly remove the cables
from the power source if the device is not to be used for a long period of time.
Use the device under the required safety power range, or it will cause power supply short circuit
and device stop working.
Use the navigation menu or the power switch to shut down, do not directly unplug the
power. A sudden power failure may cause device damage and data loss.
Do not install this device near any heat sources such as radiators, heat registers, stoves or other
devices that produce heat.
Do not install this device near water. Clean only with a dry cloth.
Do not block any ventilation openings and ensure proper ventilation around the machine.
Do not power off the device at normal recording condition.
This machine is for indoor use only. Do not expose the machine in rain or moist environment. In
case any solid or liquid get inside the machine’s case, please turn off the device immediately and
get it checked by a qualified technician.
Do not try to repair the device by yourself without technical aid or approval.
When this product is in use, the relevant contents of Microsoft, Apple and Google will be involved
in. The pictures and screenshot in this manual are only used to explain in the usage of our product.
The ownerships of trademarks, logos and other intellectual properties related to Microsoft, Apple
and Google shall belong to the above-mentioned companies.

3
Hook up a monitor to the NVR to setup the system.
(For audio system, the NVR comes with HDMI port to output audio, hook a HD TV or HDMI monitor with speaker)
8 Channel NVR Back Panel:
16 Channel NVR Back Panel:

4
Wizard Setup
1. Select language.
2. Login system with default account (User name: admin Password: 123456).
Tips: To prevent your system from being hacked, please set up a new password for system
include letters, numbers and symbols.

5
3. Set a Pattern to unlock your system (skip if you don’t need).
4. Click Next to setup time zone.
5. TCP/IP setup (network configuration). Please check in Enable DHCP.

6
How to Play Audio?
Click on the channel to select camera, click to play audio. You can only play one
channel audio once.
Note
1. If your monitor does not come with a speaker, or does not support audio input via HDMI,
it may fail to output audio.
2. Some ONWOTE cameras do not support audio.
Name Your Cameras
Click on the channel to select camera, click OSD to edit camera name.

7
Please make sure connected NVR to the router directly with an Ethernet cable to get internet.
1. Download “Guard Viewer” on your mobile phone from Apple App Store or Google play.
You can also scan the QR code below to download the mobile app.
Guard Viewer For iPhone For Android
2. Go back to the NVR monitor. Right click, choose Menu--> Network--> Basic--> P2P.
3. Check in Enable P2P and Add Without Signup.
4. Open Guard Viewer and click Sign up to register an account.
5. Type in your E-mail address and click Verify.
6. Type in the verify code received in your email and click Next.

8
7. Set a password for your account and check in I have read and agree to<<Service
Agreement>>. Click Sign Up to register account.
8. Click on the top left and choose Devices

9
9. Click +Add and Scan to scan the QR code on the NVR monitor (Right click on NVR monitor
and choose Menu--> Network--> Basic--> P2P to get the QR code).
10. Type in a name for your device and click Start Live View on the bottom to view live
video.

10
11. Select one camera and click to enable audio
12. Select one channel and rotate the phone to horizontal orientation to view video in full
screen (Turn off the portrait orientation lock of your phone.).
-->-->-->
13. Click Playback on the bottom of the page to playback video.

11
Please download the PC client software at:
For Windows PC: http://www.onwote.com/download.php?id=48
For MAC: http://www.onwote.com/download.php?id=47
Download the PC client software on Windows PC or MAC, install Guard Station.
Tips: If your MAC doesn’t allow to install the software, go to System Preference, choose
Security & Privacy, click Open Anyway to allow your MAC to install the software.

12
Windows PC
a. Launch Guard Station and login (User name: admin Password: 123456), go to Control
Panel. Click Device Management to add device
b. Click Cloud Device and Register to register a cloud account (If you’ve already registered an
account on your mobile app- Guard Viewer, login with that account directly).

13
c. Type in user name, password, email address and the verification code, click Sign up to sign
up an account.
d. Click +Add Device to add device.

14
e. Input the Register Code and set a name for your device. Click Add to add device.
(How to get Register Code? - Right click on NVR monitor, choose Menu-> Network-> Basic->
P2P to get the register code)
f. Go back to your PC client software- Guard Station, login with the account you registered.
g. Go to Live View and double click the device to view live video.

15
For audio cameras, move mouse to the channel to show up menu, click to play audio.

16
MAC PC
a. Launch Guard Station, login with default account. (User name: admin Password: 123456)
b. Click Device Management to add device
c. Click Cloud Device and Register to register a cloud account (If you’ve already registered an
account on your mobile app- Guard Viewer, login with that account directly).

17
d. Type in user name, password, email address and the verification code, click Sign up to sign
up an account.
e. Click +Add Device to add device.
f. Input the Register Code and set a name for your device. Click Add.
(How to get Register Code? -Right click on NVR monitor, choose Menu-> Network-> Basic->
P2P to get the register code)

18
g. Go back to your PC client software- Guard Station, login with the account you registered.
h. Click Menu on the top left and choose Live View

19
i. Double click device to view live video.
For audio cameras, move mouse to the channel to show up menu, click , uncheck Silent
to play audio.