Oops Forest! 091946-308 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Toddler Bed
Forest!
Model # 091946-308

Read all intructions before assembly and use of the Toddler Bed. Keep
instructions for future use.
Safety Precautions Safety Precautions
THIS PRODUCT CONTAINS SMALL PARTS WHICH ARE FOR
ADULT ASSEMBLY ONLY.
AS SMALL PARTS ARE INVOLVED IN ASSEMBLY, CHILDREN
SHOULD BE KEPT CLEAR OF THE ASSEMBLY AREA.
IDENTIFY ALL PARTS AND COMPONENTS, CLEAR AN AREA
ON THE FLOOR FOR ASSEMBLY AND PLACE A SHEET ON
THE FLOOR TO ENSURE THE TODDLER BED WILL NOT BE
SCRATCHED DURING ASSEMBLY.
DISPOSE OF ALL PACKAGING MATERIAL IMMEDIATELY
AFTER THE TODDLER BED IS ASSEMBLED.
FAILURE TO FOLLOW THESE WARNINGS AND THE
ASEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY OR DEATH FROM STRANGULATION.
DO NOT PLACE BED NEAR WINDOW WHERE CORDS FROM
BLINDS OR DRAPES MAY STRANGLE A CHILD.
WARNING
Suitable for children from 18 months up to a maximum weight of 27kgs.
Ensure the toddler bed is placed at a reasonable distance from curtains, blinds, heaters and power
points.
Ensure the toddler bed is completely assembled and check that all parts are securely tightened
before placing the child into the toddler bed.
Ensure medication, string, elastic, small toys or small items such as money etc. are always kept out
of the childs reach when in the toddler bed.
Do not place items with string, cord or ribbon around a childs neck such as hood strings or pacier
cords.
Do not suspend strings over toddler bed for any reason.
Do not over tighten bolts.
Ensure that the child is clear of any moving parts when adjusting the toddler bed.
Retain your sales receipt to provide proof of purchase.
RECOMMENDED MATTRESS SIZE (SOLD SEPERATELY)
This toddler bed has been manufactured for use with a mattress which measures 690mm wide x
1300mm long x 100-150mm thick. The width and length are specied because it is important that
the gaps between the mattress and the sides and ends of the toddler bed will not exceed 40mm.
this is to minimise the risk of a child’s limb being caught in the gap.
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Oops Toddler Bed!
Congratulations on your purchase of the
Oops Toddler Bed!
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
3

Supplied loose in box:
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Barrel nut’s
Mattress base slats
Allen key / screwdriver combination
25mm screws
53mm bolts
Left and Right Bedside guards x2
x8
x7
x1
x28
x8
x1
x1
Foot panel
Headboard
Assembly Instructions
Attaching headboard and foot panel
Place the barrel nuts into the holes of the bedside guards.
There should be 4 bearer nuts in each of the 2 bedside guards.
1.
Ensure the barrel nut is lined up with the slot parallel to where
the bolt will be inserted.
PLEASE NOTE: Do not fully tighten the bolt/barrel nuts.
2.
Assemble headboard using the 4 x 53mm bolts and the
supplied allen key.
Repeat the same steps to assemble the foot panel, using the
remaining 4 x 53mm bolts.
3.
L x1 R x1
54

Assembly Instructions
Assembling mattress base
How to care for your Oops Toddler Bed
Align slots with the pre drilled holes on the ledge of the bedside
guards.
Secure each slat with 4 screws (25mm) per slat with the
screwdriver.
1.
The bed should now resemble the image to the right.2.
Cleaning
To ensure the long-lasting use of your toddler bed, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners - tighten or
replace if required. To maintain the safety of your toddler bed, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the stroller, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
76

Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000 [email protected]