Opro9 FAR005 User manual

Owner’s Guide
Bluetooth Mini SoundBar 2.0
Mini Bluetooth Speaker
FAR005

Safety Information
Please read this guide
Please take the time to follow the instructions in this owner’s
guide carefully. It will help you set up and operate your
system properly and enjoy its advanced features. Please
save this guide for future reference.
The lightning flash with arrowhead symbol within an
equilateral triangle alerts the user to the presence of
uninsulated, dangerous voltage within the system
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle,
as marked on the system, is intended to alert the user
to the presence of important operating and maintenance
instructions in this owner’s guide.
CAUTION
RISK O F ElECTRICAL SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICE ABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNINGS
• To reduce the risk of fire or electrical shock, do not
expose the product to rain or moisture.
• Do not expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such as
vases, on or near the apparatus. As with any electronic
products, use care not to spill liquids into any part of the
system. Liquids can cause a failure and/or a fire hazard.
• Do not place any naked flame sources, such as lighted
candles, on or near the apparatus.
• Do not mend、disconnect or modify this device
• Do not use this product where the use of electronic
devices is prohibited
©2013 O’pro9 Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without written permission.
2

3
Safety Information
WARNINGS
• Do not use any charger other than that specifically
provided for use with the equipment.
• Do not use any battery pack which is not designed
use with the equipment.
for
• Keep battery pack out of the reach of children.
• The battery needs to be charged before use.
Always use the correct charger and refer to the
manufacturer ’s instructions or equipment manual
for proper charging instructions.
• After extended periods of storage, it may be
necessary to charge and discharge the battery pack
several time s
to obtain maximum performance.
• The battery pack gives its best performance when
it is operated at normal room temperature
(20°C +/- 5°C).
• Use only the battery in the application for which it
was intended.
CAUTION
Make no modifications to the system or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, and system performance.
WARNING
This product contains magnets which can be harmful
to pacemaker wearers.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Only use attachments/accessories specified by the
manufacturer.
10. Unplug this apparatus during lightning storms or when
unused for long periods of time.
11. Refer all servicing to qualified personnel. Servicing is
required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

4
Please complete and retain for your records:
The serial number is located on the rubber foot at the bottom of the speaker. The model number is located on the inside surface of the rubber
foot (pull the rubber foot away from the speaker to read the model number).
Serial number _________________________________________________________________________________________________
Model number __________________________________________________________________________________________________
Purchase date _________________________________________________________________________________________________
We suggest you keep your receipt with this owner’s guide.
Safety Information

5
Contents
Introduction
Overview ............................................6-8
Unpacking..............................................7
Setup
Connecting to AC power......................... 9
........................10
Connect to NFC ...... 11
Operation
................... 12
...................................13
................... 14
Accessories...........................................8
.
Connecting to Bluetooth
..............................
Control Panel ...................
AUX Connector
Tips on placing the speaker .
Maintenance and Care
Troubleshooting ................................ 15-19
Cleaning................................................ 20
Technical information ............................. 20

6
Introduction
Bluetooth Mini SoundBar2.0 is one of the best Bluetooth
stereo speaker with the best quality- to - price effect ratio
in the market in comparison with other similar products.
Its art-of -work design to combine Bluetooth, NFC , Mufti
-link technologies to make your best enjoyment with your
mobile handset in a free-space manners. Its wide-range
noise reduction and software DSP ( Digital Signal
Processing ) technology to secure best wireless quality
for communication , conversation and stereo music
replaying.
Overview
O’pro9 is designed with a
built-in powerful DSP (Digital Signal Processor) to create
a SHR- like surrounding sound effect to make your
enjoyment in the HiWi-simulated background. The high
output power , 5W per channel for mobile operation and
7.5W per channel for AC power assist the enhancement
of surrounding sound field in the room or in the lobby in a
more appear ant manners. And it will let you enjoy a
professional- like steric wireless replaying from your
mobile handset , either one or two sets by muti - link
operation.
Bluetooth Mini SoundBar2.0
Bluetooth Mini SoundBar2.0 implements an ultra-low-delay
Codec firmware to make the voice receiving from handset in
an almost real - time manner on both-side conversation . It
also provides you with a best music replaying from your
handset in a wireless way without any loss of phonecall
incoming at the same time. With it, you can handle incoming
call and outgoing call, while you are enjoying a stereo music
replaying from either your phone or other devices , such as
iPad, Notebook, Desktop PC etc.. Call-handling and music
replaying will be automatically switchable in operation.
Overview

7
Introduction
Overview Unpacking
Check the carton for the O’pro9 Bluetooth Mini SoundBar 2.0
speaker, power supply . Be sure to save all of the packing
materials. These provide the safestmeans for any necessary
shipping or transporting.
If any part of the product appears to be damaged , do not
attempt to use it . Contact your authorized O’pro9 dealer
immediately or call O’pro9 Customer Service . For contact
information, refer to the contact list at the end of this guide.
O’pro9 has elegant comfortable
operation design in either mobile or desk-top ways. Its dual -
site-performance flexible operation makes itself convenient
to you for an enjoyment of any wireless stereo music from
your mobile handset ( s ) or any Bluetooth - based device
outdoors or at home. A silicon-rubber cradle ( pad) will make
its reliable performance possible on the desk top with the
maximum output power of up to 15W by AC power input at
home or in the office.
Bluetooth Mini SoundBar2.0
In additions , makes true-
voice- quality sound and stereo music replaying on the
wireless communication between it and handset(s). The
smart design with the advanced technologies integrates
the special features as well as powerful functions with
the device as follows:
Bluetooth Mini SoundBar 2.0
● Muti-Link performance, one headset paring to two mobile
handsets.
Ultra-low-delay voice quality and stereo music quality
NFC built-in for easy operation
Wind-noise reduction in an excellent level on conversation
Stereo Music Replaying
Long operating life, up to 6 hours in the mobile states.
●
●
●
●
●
Overview

Introduction
Bluetooth Mini SoundBar
AC power supply
Line in
8
AC power supply
Quick Start
Guide
Bluetooth Mini SoundBar
Best-Perfor ma nce Portable Bl ue tooth
Stereo Speake r
Quick Start Guide
CviLu x Gro up ht tp:// www. cvi lux.c om
FAR005
Accessories

Setup
Plug the DC power cord on the power supply into
the DC connector on the charging cradle.
Connecting to AC power
9
Note:
Battery performance varies with the
content played and loudness at which
it is played.
In typical usage , the speaker battery
lasts for up to seven hours.
Charging
Recommended charging time is three hours
to fully charge the battery . You can use the
speaker while charging the battery.
Solid red
Solid green Charging cycle done
Battery charging
AC power

10
Setup
1. Turn on any Bluetooth - based device such as a mobile
handset, and power on Bluetooth Mini SoundBar2.0
2. Bluetooth Mini SoundBar2.0 will automatically operate a
Bluetooth function and make itself into a to-be-discovered
state by mobile handset or auto - link - back state with a
having - connected handset in a few seconds with a blue
LED flashing.
3.On mobile handset screen, an iCon “ O’pro9 F5 ” will jump
out. Just press to connect and then a Bluetooth connection
will be established immediately.
4. Blue LED will indicate you in a slow-flashing way to remind
the Bluetooth connection always existing.
Compatible with all iOS-based/Android-based
Mobile, Tablet,PC,Notebook
+ +
Pairing a Device to
into a Bluetooth Connection establishment
(with a Non-NFC Device)
Bluetooth Mini SoundBar2.0
Bluetooth
NOTE
If a speech is defaulted , the corresponding speech will be
heard from in the pairing process,
such as Bluetooth Power On, Connecting, Connection Ready
etc . If you have set any password, you should press the set
password into handset to set up the Bluetooth connection in
the first-time paring process.
Bluetooth Mini SoundBar2.0

12
Operation
Basic Operation
Control Panel (Touch Panel)
On the top of CviSound Mini Bar, the lighted switches will jump
out as soon as you touch any key on the panel. Just touch any
key that you want to operate.
Press to turn the speaker on or off.
Handfree Incoming-Call
( ) decreases speaker volume. Press and
hold the button to continuosly decrease
the volume.
( ) increases speaker volume. Press and
hold the button to continuously increase
the volume.
Blue LED will indicate you in a slow-flashing
way to remind the Bluetooth connection
always existing.
Short Press ( ) , Choose a song
Short Press ( ) , Choose the next song
Control Panel

11
Setup NFC
Pairing a Device to
into a Bluetooth Connection establishment
(with a NFC-based Device)
Bluetooth Mini SoundBar2.0
1. Turn on any Bluetooth - based device such as a mobile
handset, and power on Bluetooth Mini SoundBar2.0
2. Bluetooth Mini SoundBar2.0 will automatically operate a
Bluetooth function and make itself into a to-be-discovered
state by mobile handset or auto - link - back state with a
having - connected handset in a few seconds with a blue
LED flashing.
3.Just touch using the NFC
handset. The Bluetooth connection between them will be
automatically established at once.
Bluetooth Mini SoundBar 2.0
4. Blue LED will indicate you in a slow-flashing way to remind
the Bluetooth connection always existing.
NFC
NFC
Touch
NFC built-in for easy operation
NFC

13
Operation
To Use the AUX Connector
Using the AUX connector
A stereo audio cable with 3.5 mm Φ plugs on each end is
required to connect the audio output of your deviceto the
AUX input on the speaker.
DC 9V
Lin e in
++
Adjust the volume on the connected device to near vmaximum,
then use the speaker volume buttons to adjust the volume
level.
AUX Connector

14
Operation
Tips on placing the speaker
When using your speaker
indoors , the tonal quality can vary depending on
where the speaker is placed in a room.
Bluetooth Mini SoundBar2.0
Tips on placing the speaker
When using your speaker outdoors, you should expect the
tonal quality to change as you move farther away from the
speaker
Keep the following guidelines in mind when placing
your speaker:
• For optimal sound, the front of the speaker, which has the
O’pro9logo on the grille, should face the user.
For best bass response, the back of the speaker should
be placed near a wall, but not directly against a wall.
Bass response decreases as the speaker is moved away
from a wall. Do not lay the speaker on its back. Sound is
emitted from both the front and rear of the unit.
•
• Do not place the speaker in small areas that are
enclosedon all sides except the front, as this will
adversely affect sound quality.
• Do not place the speaker on wet or dirty surfaces.

15
Maintenance and Care
Troubleshooting
Problem
Speaker will not turn on
(AC power)
What to do
• Make sure your system is connected to a working AC (mains) outlet.
• Make sure you are using the O’pro9 power supply that shipped with
your speaker , or a O’pro9 accessory charger designed for the
Bluetooth Mini SoundBar2.0 speaker.
• Make sure you are using theO’pro9 power supply that shipped with
your speaker , or a O’pro9 accessory charger designed for the
Bluetooth Mini SoundBar2.0.
Paired Bluetooth device will
not connect to the speaker
• If your device requires a passcode, make sure the one you entered
is correct.
• Make sure Bluetooth functionality is turned on or enabled on your
source device.
• Your Bluetooth device may be out of range—try moving it closer to
the speaker.
• If possible , turn off all other nearby Bluetooth devices or disable
their Bluetooth functionality.
• Reset the speaker . Press the Mute button for ten seconds , until the
indicators briefly flash . Your Bluetoothdevice is disconnected and
theBluetooth Mini SoundBar2.0 speaker turns off . Press the Power
button to turn the speaker back on, and reconnect.
• Turn the power off and back on, and reconnect.

16
Maintenance and Care
Problem What to do
The speaker indicates a
connection, but is not
playing music
• Make sure your device is connected to the speaker.
• Make sure the transport controls of the audio device are set to play
back audio.
• Make sure the speaker is not muted and the speaker volume is up.
• Make sure your Bluetooth device is playing audio , and the device
volume is up.
• Turn off or disable Bluetooth functionality on all other paired devices
nearby ( including preferred O’pro9 devices ) and reconnect the
device you want to hear.
• Turn the speaker off and back on.
No audio from the AUX source • Make sure your connected device is on and playing.
• Press the AUX button and check that the AUX source indicator is on.
• Make sure the 3.5 mm plug is fully inserted into the speaker, and
fully inserted into the source device.
• Make sure the speaker is not muted and the speaker volume is up.
• Increase the volume level on the AUX device.
• Increase the speaker volume.
• Try using a different AUX cable.

17
Maintenance and Care
Problem What to do
Cannot pair the speaker with my
Bluetooth device
• Make sure your speaker is discoverable . Press the Bluetooth button
until the Bluetooth indicator slowly blinks blue.
• Make sure the Bluetooth capability of your Bluetooth device is
turned on.
• Make sure you select “ O’pro9 F5 ” in the pairing list on your device
and that connection is confirmed by your device.
• Your Bluetooth device may be out of range—try moving it closer to
the speaker.
• If possible , turn off all other nearby Bluetooth devices or disable
their Bluetooth functionality.
• Refer to the owner ’s guide, help system, or technical support for
your Bluetooth device to learn how it pairs with other Bluetooth
devices.
• Make sure your Bluetooth device supports the A2DP ( stereo
Bluetooth) profile.
• When connecting to a PC or Mac computer , make sure that you
select the Bluetooth Mini SoundBar 2.0 speaker as the audio output
device within the audio settings menu of the device.
Poor sound quality from an
AUX device
• Reduce the volume level on the AUX device.
• Make sure the 3.5 mm plug is fully inserted into the speaker.

18
Maintenance and Care
Problem What to do
Poor sound quality from a
Bluetooth device
• Try connecting your Bluetooth device to the speaker using the AUX
connection. If sound quality improves using the AUX connection, try
the following solutions.
• Your Bluetooth device may be out of range—try moving it closer to
the Bluetooth Mini SoundBar2.0 speaker.
• Move your Bluetooth device away from any device that generates
electromagnetic interference , such as another Bluetooth enabled
device, cordless phone, microwave oven, or wireless router.
• Reduce the number of applications running on your Bluetooth
device . Running multiple applications can reduce the amount of
internal resources available to transmit audio. Closing non-essential
applications may improve audio quality.
• Try clearing your Bluetooth device from the Bluetooth Mini
SoundBar2.0 speaker by disabling Bluetooth on your device. Pair
the device and speaker again.
• Turn the speaker off and back on.
• If your Bluetooth device is in your pocket , try placing it in open air ,
without your body between the device and the Bluetooth Mini
SoundBar2.0 speaker.
• Reset the speaker: Press the Power button to turn the speaker back
on.
• Try connecting your Bluetooth device to the speaker using the AUX
connection to verify that the poor sound quality is Bluetooth related.

19
Maintenance and Care
What to doProblem
• Make sure your device is connected to the speaker.
• Make sure the speaker is not muted and the speaker volume is up.
• Make sure your Bluetooth device is playing audio , and the device
volume is up.
• Your Bluetooth device may be out of range—try moving it closer to
the speaker.
• Move your Bluetooth device and/or the speaker is set away from
other devices that generate electromagnetic interference. Examples
are cordless phones, microwave ovens, wireless network routers, or
other Bluetooth devices.
• If possible , turn off all other nearby Bluetooth devices or disable
their Bluetooth functionality.
• Refer to the owner ’s guide , help system , or technical support for
your Bluetooth device to learn how it pairs with other Bluetooth
devices.
• Turn the speaker off and back on.
No audio from a Bluetooth
device

20
Maintenance and Care
Cleaning
To clean the exterior surface of your product, you can
wipe it using a soft, dry cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into
any openings.
Technical information
Rated Output Power 5 W X 2
Power supply AC Input:100-240V~,
50/60Hz
-DC Power Output:9V 3A
-Battery 2500mAh
Operation Power
Consumption 10W
Standby Power
Consumption 0.8W
Dimensions
-Main Unit(W X H X D) 246 X 85 X 60 mm
Weigt
- With Packing 1.45 kg
- Main Unit 0.8 kg
Technical information
32°F – 104°F
(0-40°C)
Storage
temperature
Operating
temperature
32°F – 104°F
(0-40°C)
Charging
temperature
32°F – 104°F
(0-40°C)