7
Designed and Manufactured in the
UK by Optikinetics
2. Open the App, click on the white ‘Sign Up’ button and follow the
instructions to create a User Account. (Be sure to select the
correct geographical region from the drop-down menu and to
click on the check-box to the left of the User Agreement &
Privacy Policy links.
3. Once your user account is set up and verified and you are
logged into your User Account, ensure the [OPTI] Kino projector
is switched on.
4. Short press the ‘Manual Control Button’ on the side of the
projector 3 times quickly (max 0.5 seconds between presses).
After a few moments the light on the projector will start to fade
up and down continuously, indicating that the projector is in
pairing mode.
5. Go to the Opti Kinect App. If not already there, go to the ‘Home’
page (bottom left of screen).
6. Make sure the projector’s light is still fading up and down, then
click on the blue ‘Add Device’ button in the App. The App will
now search for available devices.
7. A pop-up should now appear showing an Opti Projector
available to add. Click on ‘Go to add’.
8. You will now be asked to enter your home WiFi network details.
Be sure to select the correct network SSID and then enter the
password. Click ‘Next’
9. The App will now begin to add the Kino projector. Once added,
the ‘Next’ button will appear. Click on the button.
10. You will now see the newly added device, which will be listed as
‘Opti Projector’. You can click on the edit (pen) symbol, next to
the device name, to change the name of the device if you wish.
11. Once finished, click ‘Done’ (top right of screen).
