OPTI-UPS Power Series User manual

User Guide
Power Series
Models PS1000B, PS1500B, PS2200B, PS3000B
PS1000B-RM, PS1500B-RM, PS2200B-RM,
PS3000B-RM

1
CopyrightOPTI International Corporation, 1997. All rights reserved. OPTI-UPS
and OPTI-SAFE Xtreme are trademarks of OPTI-UPS Corporation
For your records
The serial number of your UPS is on the rear panel. You should note the
serial number in the space provided below. Retain this booklet as a
permanent record of your purchase to aid in identification in the event of
theft or loss.
Model No:
Serial No.:
Purchase Date:

LIMITED WARRANTY
What the warranty covers:
We warrant this product to be free from defects in material and workmanship
during the warranty period. If a product proves to be defective in material or
workmanship during the warranty period, we will at our sole option repair or
replace the product with a like product.
How long the warranty is effective:
For accurate warranty period and conditions, please contact local branch offices or
your dealers.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or
removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, or other acts of nature,
unauthorized product modification, or failure to follow instructions
supplied with the product.
b) Repair or attempted repair by anyone not authorized.
c) The fault is result of accidental damage or damage in transit or
transportation, including but not limited to liquid spillage.
d) Removal or installation of the product.
e) Causes external to the product.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other cause which does not relate to a product defect.
3. Removal, installation and set-up service charges.

Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND
BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Exclusion of damages:
OUR LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF
THE PRODUCT. WE SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE
PRODUCT*, DAMAGES BASED UPON INCONVENIENCE, LOSS OF
USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF GOODWILL, LOSS OF DATA,
LOSS OF SOFTWARE, COSTS OF SUBSTITUTE EQUIPMENT,
INTERFERENCE WITH BUSINESS RELATIONSHIPS, CLAIMS BY
THIRD PARTIES, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL
OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. Some states do not allow limitations on implied
warranties and/or do not allow the exclusion of incidental or consequential damages,
so the above limitations and exclusions may not apply to you.
Limitations of Warranty (for Australian States and Territories)
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading
Acts or legalization of another Government (“the relevant acts”) in certain
circumstances imply mandatory conditions and warranties which cannot be excluded.
This warranty is in addition to and not in replacement for such conditions and
warranties. To the extent permitted by the Relevant Acts, in relation to your product
and any other materials provided with the product (“the Goods”) the liability of Opti
Australia under the Relevant Acts is limited, at the option of Opti Australia to:
•Replacement of the Goods; or
•Repair of the Goods; or
•Payment of the cost of replacing the Goods; or
•Payment of the cost of having the Goods repaired.
Opti Australia reserves the right to request proof of purchase upon any warranty
claim.
Life Support:
We do not recommend the use of our UPS products for life support equipment or
direct care where failure of a UPS product could cause failure of, or diminished
effectiveness of the life support equipment or patient care.

EFFECTIVE October 1, 1997
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS !
THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS.
KEEP THIS MANUAL HANDY FOR REFERENCE.
•CAUTION: A BATTERY CAN PRESENT A RISK OF ELECTRICAL SHOCK,
BURNS FROM HIGH SHORT-CIRCUIT CURRENT, FIRE OR EXPLOSION
FROM VENTED GASES. OBSERVE PROPER PRECAUTIONS.
•WHEN REPLACING BATTERIES, USE THE SAME NUMBER AND THE
FOLLOWING TYPE BATTERIES: SEALED LEAD-ACID MAINTENANCE FREE
(PS1000B: 1234W x2) (PS1500B: 1234W x3) (PS2200B: 7.2AH/12V x8)
(PS3000B: 1234W x8) (PS1000B-RM: 7.2AH/12V x3) (PS1500B-RM: 1234W x3)
(PS2200B-RM: 1221W x8) (PS3000B-RM: 1221W x8)
•PROPER DISPOSAL OF BATTERIES IS REQUIRED. REFER TO YOUR LOCAL
CODES FOR DISPOSAL REQUIREMENTS.

CAUTION: !
THE UPS CONTAINS VOLTAGES WHICH ARE POTENTIALLY
HAZARDOUS. ALL REPAIRS SHOULD BE PERFORMED BY
QUALIFIED SERVICE PERSONNEL.
THE UPS HAS ITS OWN INTERNAL ENERGY SOURCE (BATTERY).
THE OUTPUT RECEPTACLES MAY BE ALIVE EVEN WHEN THE UPS
IS NOT CONNECTED TO AN AC SUPPLY.
Safe and continuous operation of the UPS depends partially on the care taken by
users. Please observe the following precautions.
•Do not disassemble the UPS.
•Do not attempt to power the UPS from any receptacle except a 2-pole
3-wire grounded receptacle.
•Do not place the UPS near water or in environments of excessive humidity.
•Do not allow liquid or any foreign objects to get inside the UPS.
•Do not block air vents on the side of the UPS.
•Do not plug appliances, such as hair dryers, into the UPS receptacles.
•Do not place the UPS under direct sunshine or close to heat-emitting
sources.
•This UPS is intended for installation in a temperature controlled, indoor area
free of conductive contaminants.
•The socket-outlet shall be installed near the UPS and easily accessible.
•With the installation of the UPS it should be prevented, that the sum of the
leakage current of the UPS and the connected consumer exceeds 3.5mA.
•The battery supply should be disconnected in the plus and minus pole at the
quick connectors of the battery when maintenance or service work inside the
UPS is necessary.
•Do not dispose of batteries in a fire, the battery may explode.
•Do not open or mutilate the battery or batteries, released electrolyte is
harmful to the skin and eyes.
•A battery can present a risk of electric shock and high short circuit current.
The following precaution should be observed when working on batteries
* Remove watches, rings or other metal objects.
* Use tools with insulated handles.

FEDERAL COMMUNICATIONS COMMISSION (FCC)
WARNING:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC)
This equipment does not exceed Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulation of the
Canadian Department of Communications. Operation in a residential area
may cause Unacceptable interference to radio and TV reception requiring
the owner or operator to take whatever steps are necessary to correct the
interference.

PS1000B/ PS1500B/ PS2200B/ PS3000 1
TABLE OF CONTENTS
1. INTRODUCTION
1.1 Overview 2
1.2 Sinewave Output 2
1.3 Smart Buck and Boost Line Conditioning 2
1.4 User Replaceable Battery Design 3
1.5 Advanced Interface to Communicate with Computer 3
1.6 User Configurable Settings 3
1.7 Data-Line Surge Protection 3
2. UPS CONTROLS
2.1 External Views 4
Front Panel 4
Rear Panel 5
2.2 On Button 6
2.3 Off Button 6
2.4 Select Button 7
2.5 Load Percentage Bar Graph 7
2.6 Battery Capacity bar graph 7
2.7 Fault code 7
2.8 Status Indication 7
2.9 Communication Port 8
2.10 Start-Up On Battery 8
2.11 Data-Line Surge Suppression 8
3. INSTALLATION AND OPERATION
3.1 Unpacking and Inspection 9
3.2 Placement 9
3.3 Determining How Much Equipment You Can Connect to
Your UPS 9
3.4 Powering Up Your UPS 10
3.5 Connecting Your Equipment to the UPS 10
3.6 Operation and Functional Test 12
3.7 Storage Instructions 12
4. SPECIFICATIONS
4.1 Electrical Specifications 13
4.2 Mechanical Specifications 15
4.3 Environmental Specifications 15
5. TROUBLESHOOTING
5.1 Troubleshooting Chart 16
6. USER REPLACEABLE BATTERY
6.1 Warning 17
6.2 Battery Replacement Procedure 18

2 PS1000B / PS1500B/ PS2200B / PS3000B
1. INTRODUCTION
1.1 Overview
These models are advanced line-interactive true sinewave uninterruptible power
systems (UPS) designed to prevent spikes, surges, sags, transients and
blackouts from reaching your sensitive equipment. Your equipment may include
such items as computers and computerized instruments to telecommunication
systems. When AC power is present, the UPS filters and conditions the power
continuously. When AC power fails, the unit employs its internal maintenance-
free battery to supply back-up power without interruption.
1.2 Sinewave Output
The output voltage is a true sinewave, the same waveform that your equipment
gets from the wall outlet. This provides guaranteed compatibility with all types of
loads and even the most sensitive equipment.
1.3 Smart Buck and Boost Line Conditioning
The voltage from your AC power source can fluctuate above and below the
standard rating. This microprocessor controlled UPS provides line conditioning
via both buck (step-down voltage) and boost (step-up voltage) functions. For
example, if your normal voltage is 120V and the voltage fluctuates up to 132V,
the buck function in your UPS will step it down so that your equipment receives
approximately 120V. If the voltage fluctuates down to 108V, the boost function
will step it up so that your equipment receives approximately 120V. This
provides your equipment with excellent voltage regulation with less possibility
for the UPS to drain its internal battery.

PS1000B/ PS1500B/ PS2200B/ PS3000 3
1.4 User Replaceable Battery Design
The battery is the most critical part in a UPS. The average lifetime of a battery
is between 2 and 3 years. The special user-replaceable battery design of this
UPS provides significant savings and gives the UPS an almost unlimited life.
You can replace the battery very easily, and without turning off your UPS or the
equipment it is protecting.
1.5 Advanced Interface to Communicate with Computer
Many UPSs provide only a basic power failure warning. These models, together
with software also provide you with important operating information. From your
computer screen, you can know input/output voltage and current, frequency,
battery voltage, etc., and analyze power problems. If software is not part of your
UPS package, you can purchase it from your local dealer.
1.6 Schedule Shutdown & Startup
Using software you can locally or remotely control the shutdown and startup of
equipment connected to a UPS. A customized schedule can be developed to
meet your specific requirements.
1.7 Data-Line Surge Protection
The built-in data-line surge suppression on the rear panel completes your
system protection. It provides an easy way to protect a network (RJ45) or
modem (single line phone) connection from hazardous spikes.

4 PS1000B / PS1500B/ PS2200B / PS3000B
2. UPS CONTROLS
2.1 External Views
MODEL: PS1000B, PS1500B, PS2200B, PS3000B
Front Panel
MODEL: PS1000B-RM, PS1500B-RM, PS2200B-RM, PS3000B-RM
PS1000B PS1500B/ PS2000B/ PS3000B

PS1000B/ PS1500B/ PS2200B/ PS3000 5
Rear Panel
MODEL: PS1000B
100V/110V/120V 220V/230V/240V
MODEL: PS1500B
100V/110V/120V 220V/230V/240V
MODEL: PS2200B, PS3000B
100V/110V/120V 220V/230V/240V 100V/110V/120V

6 PS1000B / PS1500B/ PS2200B / PS3000B
MODEL: PS1000B-RM, PS1500B-RM
100V/110V/120V
PS2200B-RM, PS3000B-RM
220V/230V/240V
2.2 On Button
1. When the UPS is off and AC power is present, press the On button for 1~2
seconds to turn on the UPS.
UPS can be turned on even when AC power is not present.
2. Pressing the On Button when AC power is available causes the UPS to test
itself by switching to its internal battery for a few seconds. We recommend
you close all your open files before initiating this test.
3. If AC power fails, the UPS warns you with an audible alarm. To silence the
alarm, press the On Button. When the battery starts to get low, the audible
alarm will return and beep faster.
2.3 Off Button
The Off Button has two steps to shutdown UPS :
1. Pressing the Off Button when AC power is available causes the UPS
into the sleep mode. We recommend you close all your open files before
initiating this test.
2. Pressing the Off Button 3 seconds when AC power fails causes the UPS
into sleep mode. Then pressing the Off Button 3 seconds causes the
UPS to shutdown completely.

PS1000B/ PS1500B/ PS2200B/ PS3000 7
2.4 Select Button
The relevant value appears on the upper screen. There are several parameters
can be selected
Output voltage display
Input voltage display
Input frequency
Temperature inside the UPS
Output frequency
Load level percentage
2.5 Load Percentage Bar Graph
The LCD display on the front panel shows the current load percentage. From 0
to 100 percent, the percentage of the UPS’s maximum power capacity being
drawn by your connected equipment is shown.
2.6 Battery Capacity bar graph
The LCD display on the front panel shows the percentage of the battery
capacity. From zero to 100%, the present charge of the UPS’s batteries is
shown.
2.7 Fault code
The relevant value appears at the upper screen. There are two kinds of fault
modes can be displayed.
Err0: UPS Fault
Err1: Warning of overload (exceeding 120%)
2.8 Status Indication
UPS Status Indication
“LINE” indicator: The indicator illuminates when the line input
voltage is normal.
"BY PASS" indicator: The indicator illuminates when the
loads are supplied from the utility power, through the by-pass
direction.
are supplied from the utility power, through the buck
direction.
are supplied from the utility power, through the boost
direction.
"INV": The indicator illuminates when the power is supplied
from the inverter circuit.
“BACKUP” indicator : The indicator illuminates when the
power is supplied from the batteries.
“FAULT” indicator: It shows something wrong concerning
about the UPS.

8 PS1000B / PS1500B/ PS2200B / PS3000B
2.9 Communication Port
The communication port on the rear panel of the UPS allows for connection to a
host computer. When used with software communication software you will have
access to important operating information. From your computer screen, you can
monitor input/output voltage, AC frequency, battery voltage, etc., and analyze
power problems. Software will also initiate automatic graceful shutdowns during
extended power failures.
If software and a communication cable are not included in your UPS package,
you can purchase it from your local dealer.
2.10 Start-Up On Battery
When ac input power is not available and the UPS is turned off, the Start-Up
on Battery function can be used to power up your equipment. Do not connect
too much equipment to the UPS during the Start-Up on Battery operation.
1. Disconnect the input ac power cord from the rear panel of the UPS.
2. Press the on/off button on the front panel until the UPS beeps.
3. After you have finished using the UPS, press the on/off button to turn off
the UPS.
2.11 Data-Line Surge Suppression
The data-line surge suppression on the rear panel provides an easy way to
protect a network (RJ45) or modem (RJ11) connection from hazardous spikes.
Connect a 10/Base-T network cable or a single line telephone into the “Line”
socket. To complete the connection, connect another network cable or
telephone line into the “System” socket. The network cable and telephone line
are optional accessories, which may be purchased from your local dealer.

PS1000B/ PS1500B/ PS2200B/ PS3000 9
3. INSTALLATION AND OPERATION
Before installation, please read and understand the following
instructions:
3.1 Unpacking and Inspection
Examine the packing carton for damage. Notify the carrier immediately if
damage is observed.
3.2 Placement
1. This unit is intended for indoor use only. Although your UPS is very rugged,
its internal components are not sealed from the environment.
2. The UPS must be installed in a protected environment away from heat-
emitting appliances such as a radiator or heater. Do not install this product
where excessive moisture is present.
4. The location should provide adequate air flow around the UPS with one
inch minimum clearance on all sides for proper ventilation.
3.3 Determining How Much Equipment You Can Connect to Your UPS
1. Make a list of all equipment that requires protection.
2. Each piece of equipment has voltage and current (VA) ratings printed on
the back label (see examples below). Your equipment may have a voltage
rating such as 88-264V. Since the standard voltage in the United States is
120V, you should use 120V in your calculations.

10 PS1000B / PS1500B/ PS2200B / PS3000B
ViewSonic G810
120V 2.7A
50 / 60 Hz
SN: Q771515388
Computer Co
Pentium Pro 200MHz
120V 2.0A
50/60 Hz
SN: 123456
3. Multiply the voltage and current of each piece of equipment (VA
requirements); for example, 120V x 2.7A = 324VA, 120V x 2.0A = 240VA.
Add up the VA requirements for each device; for example, 324VA + 240VA
= 564VA.
4. Make sure that your UPS has at least as much VA capacity as your
equipment requires.
3.4 Powering Up Your UPS
1. For 110/120V versions, connect the power cord to a verified grounded 3-
wire receptacle. For 2X0V versions, please refer to Sec 3.5 .
2. Power up the UPS by press the On/Off button for 3 seconds on the front
panel.
3. We recommend that you charge the battery for six (6) hours before
first use of your UPS.You may use the UPS immediately without charging
the battery, but the backup time may be less than the rating. The UPS
recharges the battery automatically whenever AC power is available.
3.5 Connecting Your Equipment to the UPS
1. For all UPS models except the 2xxV versions: connect the power cord(s) of
your computer equipment to the output receptacle(s) of the UPS. Switch on
the computer equipment.
2. For 2xxV versions, as shown in the illustration below: connect the input
power cord of your computer equipment to the inlet of the UPS and the wall
socket. Use the power cord supplied with the UPS to connect from the
outlet of the UPS to your equipment. Switch on the computer equipment.

PS1000B/ PS1500B/ PS2200B/ PS3000 11
3. DO NOT PLUG LASER PRINTERS INTO THE UPS BECAUSE THEY
TYPICALLY DRAW TOO MUCH POWER

12 PS1000B / PS1500B/ PS2200B / PS3000B
3.6 Operation and Functional Test
1. Plug in the AC input cord to the rear panel and turn on the UPS by pressing
the “On/Off” switch for 3 seconds. The UPS will beep and the front panel
Normal Mode LED will light.
2. The UPS may be overloaded if the buzzer sounds continuously and the
Overload LED lights. Unplug the least critical devices, such as a printer,
etc… If the buzzer is still sounding, the battery or UPS may be faulty.
Contact your local dealer for assistance.
Note: Backup all unsaved files before you perform the following
functional test.
3. To test the backup function, you may unplug the power cord of the UPS or
simply press the On Button on the front panel. During this test, observe that
your equipment operates properly and without interruption. If you leave
your UPS on continuously, it is a good idea to perform a “Test” at least
once a month.
If you unplug the power cord, all models will beep once every 4 seconds.
You can press the Test Button to silence the alarm. The Battery Mode LED
will light. Plug the power cord back in after a few seconds.
If you press the On Button, the Battery Mode graph will light momentarily.
3.7 Storage Instructions
For extended storage in moderate climates, the battery should be charged
for 12 hours every 3 months. Repeat it every 2 months in high temperature
locations. Plug in the power cord. The UPS does not need to be turned on
to charge.