Optoma EW865 User manual

EW865
EX855
Uncompromising image quality,
outstanding flexibility and ultimate reliability
WXGA 6000L \ XGA 5500L
Lens options
Motorised lens shift \ zoom focus
Advanced geometric adjustment
* EW865 available in white only / EX855 available in black only

For more than ten years Optoma has been one of the world’s foremost projector designers and manufacturers - amongst the
very few companies that focus exclusively on projectors.
Today the Optoma ProScene range represents the evolution of projection expertise, honed and refined by manufacturing and
supporting millions of projectors the world over. This knowledge and skill has been distilled into the ProScene products and
support services which are designed specifically for demanding professional applications.
9Higher education
9Lecture theatres
9Houses of worship
9Museums
9Auditoriums
9Boardrooms
9Broadcast studios
9Large classrooms
9Exhibitions
9Conference rooms
9Digital signage
9Stage shows
9Live events
9Projection Mapping
9Meeting rooms
9Post production
9Theatre
9Trade shows
ProScene Certified Partners
Optoma understands that for ProScene customers, their high specification projector must be of exceptional quality and that the
level of support and expertise provided by AV installers and integrators must also be of the highest calibre. To maintain this standard
throughout, we have selected only the very best from within the AV industry to become ProScene Certified Partners.
These rigorously selected partners understand your specific requirements and perhaps as importantly, they have direct access
to the specially-trained Optoma support and service teams. Our dedicated experts are available from the initial design and planning
phase of a project, right through to the installation stages and beyond. Through our partners, you’ll have access to what is probably
the most extensive network of service centres across Europe of any projector manufacturer.
Choosing your ProScene projector is just the start. Total support and service excellence are the core of the ProScene ideology,
ensuring industry leading dedication to giving you the highest standard of expertise from Optoma and from our certified partners.
Introduction

The ProScene EW865 & EX855 are the epitome of our projection expertise; a revolution; a product designed exclusively for
demanding professional applications.
WXGA/XGA and 6000/5500 lumens delivering bright crystal clear images from a single lamp, the auto cleaning dust filter
prevents dust and dirt from affecting the system ensuring optimal image quality with minimal maintenance.
Motorised lens shift, focus and zoom combined with the extensive lens options provide installation flexibility for simple, trouble
free use in a wide variety of situations.
EW865/EX855 features
WXGA / XGA Native resolutions
6000 (WXGA), 5500 (XGA) Lumens
360º 360 degree operation
Mechanical shutter
Installation flexibility - 3 lens options, motorised lens shift, focus and zoom
120Hz 3D projection
Advanced geometric adjustment
Features

UHP lamps
The Philips 400W UHP lamp provides the highest possible luminance,
the essential prerequisite of all highly efficient projectors.
These lamps have outstanding brightness, stay brighter for longer, and
provide an optimal colour spectrum. In addition, the lamp drivers are
specifically tuned for the lamps, ensuring not only optimum operating
conditions for every situation, but also provide sophisticated lamp
pulsing modes and the assurance that colour can be fine-tuned
according to the application.
Amazing Colour
Both WXGA and XGA incorporate BrilliantColor™ technology
to produce stunningly bright images with perfectly balanced
life-like colours.
DLP®Technology
DLP®technology from Texas Instruments®is widely recognised
and acclaimed for its unmatched reliability and long lasting
image performance. When combined with high brightness
and native contrast ratios, it becomes the obvious choice for
demanding applications. Independent testing has proven DLP®
to be the most reliable of projector technologies. Whilst the
competition may show image quality decline after only a few
thousand hours, DLP®technology can remain unchanged over
hundreds of thousands of hours.
Superb image quality is at the heart of every ProScene product design. At every step, commencing with the incredibly reliable,
high resolution WXGA or XGA DLP®chip, where the image is initially created, via the Philips UHP lamp. ProScene chose DLP®
technology for its image quality and unmatched reliability. The reflective nature of DLP®micro-mirror technology provides highly
efficient bright images with great contrast whilst maintaining precise colour accuracy and natural, real-world colour reproduction.
For demanding professional applications, the proven reliability of DLP®technology makes it the obvious choice.
Image Quality
3D Technology
Using the inherent speed of DLP®technology, The Optoma EX855 and EW865 can output video and images at an astonishing rate
of 120Hz, allowing you to show full screen, full colour, stereoscopic 3D. The 3D effect is generated by splitting this signal into two
standard video streams, one for each eye. Using DLP®Link™ technology, the 3D glasses synchronise with the image on screen to filter
each stream to the correct eye. Your brain then combines the two streams to make them jump into life.
The 3D features of Optoma projectors can only be used with compatible 3D content. Typical applications include use with 3D educational
or 3D design and modelling systems. Support for 3D TV broadcast systems, (SKY in the UK) or Blu-ray 3D™ will require the Optoma
3D-XL that is available separately.

Installation Flexibility
To help meet the seemingly limitless challenges of ProAV installations
both the EW865 and EX855 provides 3 lens options with motorised
zoom and focus to ensure you can get the image size you require.
Motorised lens shift helps you get the image exactly where you
want it and the 6 Segment RGBCYW colour wheel ensures you can
match the image quality and brightness exactly to the application’s
requirements.
Motorised Lens Shift
Hright1HHleft
Vdown
1V
Vup
Standard projection position
Lens Shift Range
Horizontal Vertical
Left Right Down Up
XGA +/-18% +/-18% +/-60% +/-60%
WXGA +/-10% +/-10% +/-50% +/-50%
360° Projection Capability
Images can be projected over a full 360° range along the vertical
axis including reproduction on an ceiling or floor. The application
possibilities are limitless.
Self-Cleaning Filter
The self-cleaning air filter senses when the filter is becoming
clogged and momentarily reverses the direction of the fan
to clear the filter. As a result the time between service intervals is
greatly increased.
All ProScene projectors are designed for continuous 24/7 operation. Only the most reliable, industry proven
components are used to ensure superior reliability. This hard-earned “capability” has been meticulously
developed over a decade of designing and supporting millions of projectors the world over. ProScene
customers can therefore be confident that, as one of the most reliable projector brands in the industry today,
Optoma has a reputation for service excellence that is well deserved.
Reliability

Flexibility
Flexibility
Lens Options
Optoma model name BX-CTSFX* BX-CTA01 BX-CTA02 BX-CTA03
Focal Length (f) (mm) 13.5mm 14.05mm 18.07mm 22.61mm
F number 2 2.3 2 2.3
Zoom Range (Ratio) 1:1.(Fixed Lens) 1.28x 1.25x 1.9x
Zoom & Focus Adjustment Manual Motorized
Throw Ratio (XGA) 0.83 1.25 ~ 1.61 1.61 ~ 2.02 2.01 ~ 3.85
Throw Ratio (WXGA) 0.67 1 ~ 1.28 1.28 ~ 1.61 1.6 ~ 3.07
Projection Image Size 50~500”
Throw Distance Chart
EX855 Throw Distance
Diagonal Image Size BX-CTSFX BX-CTA01 BX-CTA02 BX-CTA03
Fixed Min (m) Max (m) Min (m) Max (m) Min (m) Max (m)
50”
60”
70”
80”
100”
150”
200”
250”
300”
0.68
0.82
0.95
1.09
1.36
2.04
2.72
3.40
3.40
1.27
1..52
1.78
2.03
2.54
3.81
5.08
6.35
7.62
1.64
1.96
2.29
2.62
3.27
4.91
6.54
8.18
9.81
1.64
1.96
2.29
2.62
3.27
4.91
6.54
8.18
9.81
2.05
2.46
2.87
3.28
4.10
6.16
8.21
10.26
12.31
2.04
2.45
2.86
3.27
4.08
6.13
8.17
10.21
12.25
3.91
4.69
5.48
6.26
7.82
11.73
15.65
19.56
23.47
EW865 Throw Distance
Diagonal Image Size BX-CTSFX BX-CTA01 BX-CTA02 BX-CTA03
Fixed Min (m) Max (m) Min (m) Max (m) Min (m) Max (m)
50”
60”
70”
80”
100”
150”
200”
250”
300”
0.89
1.07
1.25
1.43
1.79
2.68
3.58
4.47
4.47
1.11
1.33
1.55
1.77
2.21
3.32
4.43
5.53
6.64
1.42
1.70
1.98
2.27
2.83
4.25
5.67
7.08
8.50
1.42
1.7
1.98
2.27
2.83
4.25
5.67
7.08
8.50
1.78
2.14
2.49
2.85
3.56
5.35
7.13
8.91
10.61
1.77
2.13
2.48
2.83
3.54
5.31
7.08
8.86
10.63
3.4
4.08
4.76
5.44
6.80
10.19
13.59
16.99
20.39
For guide purposes only
* Recommended for video applications only.

Features
Colour Matching*
The EW865/EX855 has a full 3-axis colour matching system, which
combined with accurate measurements can create seamless blends
every time.
Edge Blending / Stacking* (Requires optional GEO Module BE-BWM01)
Double you image brightness or create seamless high resolution displays using the powerful warp and blend features.
Single image, two projectors - image is bright but has
a band because the image is not blended Single image, two blended projectors -
A bright, high resolution image with no band
Geometric Adjustment* (Requires optional GEO Module BE-BWM01)
Geometric correction enables projection on to spherical, cylindrical and other curved shaped screens
Brightness Matching*
The brightness of a projector will vary throughout its life. To correctly
match multiple units, the EW865/EX855 has 10x lamp power steps
between 80~100% full brightness.
Without With
*Please note: Support for these features may require a firmware upgrade - please check the Optoma website for more information.

Control
Hassle-free PC-less Presentation
Enjoy hassle-free presenting with the USB Reader to project a JPEG
presentation from a USB flash drive.
Global monitoring of
all AV devices
Track projector
lamp life
Email alerts and
instant notifications-
help desk requests,
service reminders,
device failure or theft
Event Scheduling
Download Crestron RoomView®Express software from:
www.crestron.com/getroomview
LAN Display connectivity
Avoid the hassle of using chunky cables from your source to the projector. LAN / Wi-fi display connectivity allows you to share your PC or Laptop’s
desktop, pictures and documents via a wired or wireless network connection. Simultaneously display desktops from four different devices; ideal for
comparing charts and figures in a collaborative working environment. Alternatively present one image to eight projectors at the same time.
System Integration Control
Using the free Crestron Roomview software, multiple EW865/EX855 can be monitored over LAN and also provide the user with an email
message alert in case an error occurs or a lamp fails. Cut up to 30% from your energy bills using 24-hour automated power scheduling to
ensure that projectors power off when not in use.
The web browser interface and full support for PJ-Link protocols, allow almost all aspects of the EW865/
EX855 to be controlled across a network, reducing installation costs and keeping you in control, wherever
you are. While RS-232 connectivity ensures legacy support for existing control systems..
Wireless
Easy to use and simple to setup, the Optoma Mini Wi-Fi Dongle
lets you connect and display presentation
materials wirelessly from a Laptop, PC or Mac to your projector.
This miniature sized Wi-Fi Dongle brings you all the benefits of seamless
wireless connectivity to a meeting or event.
Optional accessory
Projector 1
Projector 2
Projector 3
Centralised
Management PC
Laptop

Eco Friendly
Cut up to 30% from your engergy bills using 24-hour automated
power scheduling to ensure that projectors power off when
not in use.
Direct Power On
The projector will start up instantly when power is supplied
to the Unit. This eliminates the need to manually turn on the
projector via the remote control or the keypad, ideal for use
in rooms with a “master” power switch.
Signal Power On
The projector will power on when it receives a signal through
one of the PC/video inputs. This ensures that the projector
is only switched on when it is needed.
Auto Power Off
If after a pre-determined time the projector does not receive
a signal, it will turn itself off automatically, conserving power
and extending the life of the lamp.
Eco Standby Mode
Reduces energy consumption to less than 0.5W
when the projector is not in use.
Green
We know that improving our products is the best
way to reduce our impact on the environment.
That’s why at Optoma, we design our products
to have a long usable life, use fewer materials,
ship with the minimum packaging and be free
of all possible toxic substances. Naturally, energy
efficiency and being recyclable are built in at the
design stage. With each new product, we strive
towards minimising our environmental impact.
For full details of Optoma Project Green please
visit our website.

Dimensions

Easy to use remote control
Input/Output Connections
1VGA-Out Connector (Monitor Loop-through Output)
2RS-232 Connector (9-pin DIN Type)
3VGA1 -In/SCART Connector
(PC Analog Signal/Component Video Input/HDTV/YPbPr)
4VGA2-In Connector
(PC Analog Signal/Component Video Input/HDTV/YPbPr)
5DVI-D Connector
6HDMI Connector
7Composite Video Input Connector
8S-Video Input Connector
9Component Video Input Connector (YPbPr)
10 BNC Input Connector (YPbPr/RGBHV)
11 3D Sync Out (5V) Connector
12 12V Trigger Relay Connector ( 2V, 250mA. 3.5mm Mini Jack)
13 In/Out Wired Remote Connector (3.5mm jack)
14 Audio Output Connector (3.5mm Mini Jack)
15 Audio Input Connector (3.5mm Mini Jack)
16 Left/Right RCA Audio Input Connector
17 Power Switch
18 Power Socket
19 RJ-45 Networking Connector
20 Mini USB B Connector (For display over USB purpose)
21 Kensington™ Lock Port
22 USB A Connector / (Wireless Dongle)
2827
Labelling
1 2 3 4 5 6
7
8
9
10
11
12 13 14 18171615
22
21
20
19
1Off
2Power button
3Shutter
4Source
5Zoom
6Focus
7Shift
8VGA 1
9VGA 2
10 Menu
11 Re-Sync
12 DVI-D
13 HDMI
14 Four Directional Select Keys
15 Enter
16 YPbPr
17 BNC
18 AV Mute
19 Info. (Information)
20 S-Video
21 Video
1Power On
2Standby
3Function 1
4Function 2
5Shift
6Zoom
7AV Mute
8Test Pattern
9Focus
10 Re-Sync
11 Source
12 Shutter
13 Keystone +/-
14 Mode
15 S-Video
16 HDMI
17 Video
18 DVI
19 Re-Sync
20 Info
21 Menu
22 Format
23 VGA 1
24 VGA 2
25 BNC
26 ID
27 All
28 YPbPr
Key pad
1
2
3
4
5
6
11
12
13
14
15
16
17
18
19
20
7
8
9
10
21
22
23
26
25
24
1 2 3 4
5
6
10
14
15
18 19 20 21
7
8
9
11
12
13
16
17

Technical Specifications
Projector
DLP™ Technology by Texas Instruments
Display Technology 0.65” WXGA, or 0.55" XGA, Type A chip
Brightness (WXGA) 6000 / (XGA) 5500 centre lumens using “Bright” mode settings
Contrast 2000:1 and up to 4000:1 contrast ratio with dynamic aperture enabled
Colour Wheel 6 Segment RGBCYW
Optics
Throw Ratio Dependent upon lens:
BX-CTA01 - 1.25 ~ 1.61 (EX855) 1.0 ~ 1.28 (EW865)
BX-CTA02 - 1.61 ~ 2.02 (EX855) 1.28 ~ 1.61 (EW865)
BX-CTA03 - 2.01 ~ 3.85 (EX855) 1.6 ~ 3.07 (EW865)
Lens Shift WXGA Horizontal : +/-10%, Vertical : +/-50%
XGA Horizontal : +/-18%, Vertical : +/-60%
Keystone Correction Vertical ±20°
Lamp Type: 1 x 400W
Lamp Life 2000 Hours BRIGHT mode / 2500 Hours ECO mode
Shutter Mechanical
Connectivity
INPUTS HDMI (with locking screw)
DVI-D
BNC (RGBHV)
PC RGB 2 x 15 Pin D-Sub VGA
Component 3 x RCA
S-Video/Composite 4 pin Mini DIN / RCA
Control RS232 & RJ45 (Can work simultaneously)
Audio-In x 3 in (2x mini jack, 1 set of RCA L/R)
OUTPUTS 1 x mini jack
PC (monitor loop-through) VGA Out
+12V Trigger Low-voltage DC connector
Other
Wi-Fi Support via Mini WiFi Dongle (Dongle Optional)
USB Card Reader
Remote Control: Full Function wired remote, 4x IR code sets for controlling multiple units.
General
Native Resolution WXGA (1280 x 800) / XGA (1024 x 768)
Noise Level 34dB (Normal) / 31dB (ECO)
Aspect Ratio 16:10 Native, 4:3 & 16:9 Compatible
Video Compatibility: PAL (625/576i/p), SECAM, NTSC (525/480i/p), HDTV (720p, 1080i)
Refresh rate Horizontal 15kHz to 100kHz, Vertical 48 Hz to 100 Hz & 120Hz for 3D
Uniformity 95% (centre)
Projection Types Front, Ceiling Mounted, Rear, Rear Ceiling Mounted
Power Supply: 100 – 240V AC @ 50 – 60Hz
Power Consumption 545W BRIGHT mode, 460W ECO Mode < .5W Standby mode, 760W ECO mode
<1W Standby mode
Heat Dissipation 3412 BTU/hr
Operating Conditions 5 ~ 40°C, Max. Humidity 85%, Max. Altitude 3000m
Portrait mode1Not supported
360’ Operation Yes
Weight / Dimensions (W x D x H) 18.3 ± 0.5kg (without lens) / 540 x 420 x 199mm
Security: Security bar & Kensington lock, Password Protection
Standard Accessories: AC Power Cord, VGA Cable, Infra-Red Remote Control, Batteries x 2, User Manual CD, Quick
Start Card, Warranty Card, WEEE card
Chassis Colour EW865: White (only)
EX855: Black (only)

Accessories
Flying Frame EX855/EW865
Part Nr: P5750
The safest way for handling a projector in rental & staging
applications is by using it in combination with a flying frame.
The projector is fitted on a bottom frame that is adjustable in 3 axes,
allowing the projector to be lined out on screens with high accuracy.
This frame can be used in combination with a second frame and
projector for i.e. 3D. The stack frame has mounting holes for truss
hooks or chains. A projector mount (392315b) is necessary to fix
the projector to the stack frame (4 x 8M)
Short Ceiling Mount
Part Nr: 390065b
The universal ceiling mount 390065b is a rigid and strong ceiling
mount suited for suspending EX855 and EW865 or EH7500
projectors from the ceiling.
• Maximum load 70 Kg
• Standard equipped with the patented ball-joint.
• Maximum adjustment angle 20 degrees
• Fixed length of 165 mm
• Mounting pattern 90 x 90 mm suited for EX855/EW865
and EH7500 projector mounts
Long Ceiling Mount
Part Nr: 390061b
The universal ceiling mount 390061b is a rigid and strong ceiling
mount suited for suspending EX855 and EW865 or EH7500
projectors from the ceiling.
• Maximum load 70 Kg
• Standard equipped with the patented ball-joint
• Maximum adjustment angle 20 degrees
• Adjustable between 700-940 mm
• Mounting pattern 90 x 90 mm suited for EX855/EW865
and EH7500 projector mounts
Projector Base Plate
Part Nr: 392315b for EX855/EW865
Part Nr: 392311b for EH7500
The above will need a projector base plate, EX855/EW865 (392315b)
and the EH7500 (392311b).
Both base plates use 4 x 8M screws to attach your projector and the
ceiling mount plate uses 4 x M6.

Accessories Continued
17990 Flight Case EX855/EW865
Heavy Duty flight case with wheels and handles and can also
carry two extra lens plus space for cables and remote.
• Part Number: 17990
• Weight 32 kilo
• Shipping dimensions 930 x 555 x 445mm
Geo Module BE-BWM01 (for EX855/EW865)
Part Nr: SP.8LB06GC01
When combined with an EX855 or EW865, the optional
BE-BWM01 Geo Module seamlessly integrates powerful image
adjustment features directly into your projector, Including:
• 4 Corner adjustment
• Horizontal Keystone
• Curved Wall correction
• Edge Blending
Optimised edge blending
(Available direct from Optoma)
Optoma have worked in partnership with Calibre to produce
special versions of Calibre’s edge blending and warping
products optimised for use with our ProScene projectors. This
unique collaboration significantly reduces the complexity and
configuration time required to edge blend multiple ProScene
projectors and is covered by the industry leading ProScene
technical support services should you require assistance with
your edge blending project.
HQView320 HQV™ Scaler with Warp and Edge Blend
Best in class professional image processing in a compact
affordable module.
HQView520 Universal HQV™ Scaler–Switcher-Scan Converter
with Warp, Edge Blend & 3G-SDI In/Out
Use as a routing switcher and universal interface for 3G-SDI,
HD-SDI, DVI or HDMI

Offices
Optoma Europe
Optoma Europe Ltd.
42 Caxton Way
The Watford Business Park
Watford
Hertfordshire
WD18 8QZ
UK
Tel: [phone]
Fax: [phone]
Optoma Deutschland GmbH
WIESENSTRASSE 21
D40549 Düsseldorf
Germany
Tel: [phone]
Fax: [phone]
Optoma France
Batiment E
81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt
France
Tel. : [phone]
Fax: [phone]
Optoma Spain
C/ José Hierro,36 Of. 1C
28529 Rivas VaciaMadrid
Madrid
Spain
Tel: [phone]
Fax: + 34 91 670 08 32
Optoma Benelux
Optoma Benelux BV
Randstad 22-123
1316 BW Almere
The Netherlands
T: [phone]
F: + 31 (0)36 548 9052
Local Representatives
Turkey
UAE
Poland
Russia
Italy
Optoma Scandinavia
Optoma Scandinavia
Lerpeveien 25
Postboks 9515 Åskollen
3038 Drammen
Norway
Tel: [phone]
Fax: [phone]
Optoma USA
Optoma USA Headquarters
3178 Laurelview Ct.
Fremont, CA 94538
Tel: [phone]
Fax: [phone]
Atlanta Sales Office
7000 Central Park NE, Suite 570,
Atlanta, GA 30328
Tel: [phone]
Fax: [phone]
Canadian Sales Office
2420 Meadowpine Blvd, Suite 105,
Mississauga, ON L5N 6S2, CANADA
Tel: [phone]
Optoma Asia
Taiwan
Optoma Corporation
Taipei Office
5F., No. 108, Minchiuan Rd. , Shindian City,
Taipei Taiwan 231, R.O.C.
Tel:：[phone]
Fax:：[phone]
http://www.optoma.com.tw
Taichung Office
7F-5, No.3, Lane 2, 1st Rd, Taichung Industrial
Park, Xitun Dist., Taichung City, 40767, Taiwan,
R.O.C.
Tel:：[phone]
Fax:：[phone]
Kaohsiung Office
Rm. D, 7F, No.108, Zhonghua 3rd Rd., Qianjin
Dist., Kaohsiung City 80145, Taiwan, R.O.C.
Tel:：[phone]
Fax:：[phone]
China
Shanghai Office
5F, No. 1205 Kaixuan Road, Changning
District , Shanghai
Tel: [phone]
Fax: [phone]
http://www.optoma.com.cn
Beijing Office
20D apartment 3, Build No.3, Yindu Tower, No
48 ZhiChun road, HaiDian district, Beijing
Tel: [phone]
Fax: [phone] *8018
ShenYang Office
Room1201, building C3, Wulihe Tower, No 4-1
WenTi road, HePing district, ShenYang
Tel:：[phone]
Fax:：[phone]-808
Xi’an Office
Room 1310, building B, ShiMao tower,
GuanDongZheng street, Xi’an
Tel: [phone]
Fax: [phone]
GungZhou Office
Room 602, NanTie Tower, No.57
No.1ZhongShan road, YueXiu district,
GungZhou
Tel: [phone]
Fax: [phone]
ChongQing Office
Room 9-2, building 19 HuaYuMingDu,
ShiQiaoPu, ChongQing
Tel: [phone]
Fax: [phone]
ChengDu Office
Room A3 floor 20, building A Time digital
square, No.1 South RenMin road, ChengDu
Tel: [phone]
Hong Kong Office
Unit A, 27/F., Dragon Centre, 79 Wing Hong
Street, Cheung Sha Wan, Kowloon, Hong Kong
Tel:：[phone]
Fax:：[phone]
http://www.optoma.com.hk
Worldwide technical and commercial support

V6 - 29/05/14
Optoma Europe Ltd.
42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK. WD18 8QZ
www.optoma.co.uk
1Restrictions may apply, please check the Optoma website for more information. Brightness and lamp lifetime will vary depending on selected projector mode, environmental conditions and usage. As is common with all lamp based
projectors, brightness will decrease over the lamp lifetime. Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions. Optoma guarantees that in normal use, Optoma DLP®colour quality
will be indistinguishable from when new. Exclusions: (a) Guarantee is voided if the projector is subject to damage through misuse. (b) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is
excessive (c) Guarantee will not apply if lamp brightness is below 50% due to wear or if the projector is not working due to other faults. (d) Over time worn lamps within all projector types will show a slight colour variance. Copyright © 2013,
Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. Crestron®, the Crestron and RoomView®logo are
registered trademarks of Crestron Electronics, Inc. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments. All images of
products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to
the front panel. Optoma reserves the right to amend or alter actual product or product images without notice. Some images may be simulated.