Orava EG-1900 User manual

Electric grill
EG-1900
Instruction manual EN
EG-1900

2EN
The intended use of the device
The device is designed exclusively for the heat treatment of food - grilling,
baking etc., to the extent that it is determined by the technical and
operating parameters and functions, the safety and user instructions and
the external influences of the operating environment.
ORAVA Electrical Appliances are manufactured in accordance with the
state of the art and recognized safety-technical rules. Nevertheless, the
use or use contrary to designation may result in the risk of injury to or
endangering the life of the user or third person, damage to the device and
other material values.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for
safe, correct and economical operation of the electrical equipment. Its
compliance helps the user avoid risks, increase reliability and product life.
• In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept of
electrical equipment in the strict sense of the word will include the following
categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending machines.

3EN
1.1 General safety instructions
• Before operating the unit, we recommend that you carefully read the
instruction manual and operate the equipment in accordance with the
instructions!
• The safety instructions and warnings in this manual do not cover all the
possible conditions and situations that may arise when using the device.
The user must understand that a factor that cannot be incorporated into any
of the products is personal responsibility and caution. These factors must
therefore be ensured by users serving this device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
• Keep the instruction manual as close to the device as possible throughout
its service life. Always keep the instruction manual together with the
appliance for future use and use by new users.
• Use the appliance only for the intended purpose and in the manner
specified by the manufacturer.
• The appliance is intended for home and similar indoor use without special
focus.
• This appliance is intended, in addition to domestic use, for the following
uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance
with the basic characteristics set out.
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of
water vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous
parts by hand and non-waterproof)

4EN
• This degree of protection is not indicated on the product and on the
technical parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this information
is then displayed on the label of the appliance or in the technical data of the
operating instructions.
• Other characteristics of the domestic operating environment (mechanical
stress - vibrations and vibrations, occurrence of plant, animals, weather
effects ...) are negligible in terms of effect on the correct and safe use of
electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make
sure that the voltage on the appliance label corresponds to that of the
household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
• Electrical protection class I equipment is equipped with a protection against
electric shock by means of protective earthing of inanimate parts, which
can become dangerous when the device is malfunctioning. Always connect
such devices to properly installed mains sockets that are equipped with
earthing conductors and have a properly grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by double
insulation or by enhanced insulation of hazardous live electrical parts.
Device of protection class II it must not be equipped with means to connect
protective earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small safe
voltage source (battery or accumulator) and does not present any danger
to the user from electrical shock.
• In order to provide increased safety against the risk of electric shock due to
the use of electrical appliances by laypersons, it is recommended to install
the power supply circuit for sockets with a rated current not exceeding 20 A
RCD with a rated operating current not exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a
qualified electrician.
• Only use a power cord with a plug (mains lead) supplied with the device
and compatible with a wall socket. Using another cable may result in fire or
electric shock.
• Always connect an electrical appliance to an easily accessible mains
socket. In the event of an operating fault, the appliance must be switched
off as soon as possible and disconnected from mains supply.
• The power cord and mains plug must always be easily accessible for safe
disconnection of the electrical appliance from the power supply.
• Do not pull off the power cord by pulling the cable. Disconnect the power
cord by pulling the plug behind the power cord plug.

5EN
• If you use an extension cord, make sure that the total rated power of all
devices connected to the extension cord does not exceed the max. current
load on the extension cable.
• If you need to use an extension cord or power supply block, make sure that
the extension cord or power pack is plugged into a power socket, and not to
another extension cord or power supply. The extension power cord or power
supply block must be designed for grounded electrical plugs and connected
to a properly grounded electrical socket.
• The power plug of the appliance must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
inappropriate or damaged drawers!
• To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not use
adapters that do not have a grounding element or remove the grounding
element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord of the appliance to
mechanical stress or external heat sources. Damage to the power cord may
result in electric shock.
• When the power cord is damaged, disconnect the appliance from the mains
and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer,
its service department or a similarly qualified person to avoid the risk of
electric shock.
• Regularly check and maintain the electrical appliance as well as the power
cord and power socket. Disconnect the power plug regularly and clean it if
necessary. Pollution by dust or other substances may cause disruption of
the insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress of water into
the appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water, disconnect it
immediately from the mains. If the appliance is plugged into a mains socket
and if possible, turn off the power circuit before attempting
unplug the power. If you are pulling wet wires from a live power source, be
very careful.
• If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is finished.

6EN
1.4 Safety of persons
• This appliance is intended for use and operation by persons without
electrotechnical qualification - lay people, according to the instructions
specified by the manufacturer.
• Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory
inspection of the equipment, and user cleaning and maintenance.
• This appliance can be used by children under the age of 8 and persons
with reduced physical, sensory or mental capabilities or lack of experience
or knowledge when supervised or instructed to use the appliance safely
and understand the dangers involved.
• Children may not play with the appliance.
• Cleaning and maintenance for users may not be performed by children
unattended.
• Always keep the appliance out of reach of children during use and
operation. Be sure to download the appliance even for a freely accessible
power cord.
• Always be careful when operating the electric appliance! Do not use an
electric appliance if you are overly tired, under the influence of medication
or narcotic drugs that reduce attention and focus.
• Inattention during operation may result in serious injury.

7EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance in
the recommended way. Do not use solvents or harsh cleaners for cleaning.
Pollution and visible stains from finger contact, respectively. The hands
can be cleaned using detergent detergents specially designed to clean
household appliances.
• If you do not use the appliance, clean it or disconnect the appliance from
the power supply when the appliance is faulty.
• Electrical appliances that are cleaned after use and are not intended to be
completely or partly immersed in water or other liquid, protect against the
effects of dripping and / or splashing water and before immersion.
• Electric household appliances, like all other technical devices, are subject
to the surrounding environment and natural wear. Since the legal framework
of regular maintenance is not laid down for lay-in electrical household
appliances, the manufacturer recommends that the user have the appliance
checked and cleaned at least once a year by a specialist workshop.
• By doing so, it is possible to achieve safety, operational reliability and
increased service life.
• Do not disassemble the electric appliance! The appliance works with a
dangerous voltage. For this reason, always switch off the appliance and
disconnect it from the mains supply during user maintenance. In the event
of a fault, please have the repair serviced by an authorized service center.
• Before calling a service:
1. Verify that you are unable to remedy the malfunction yourself according
to the procedure described in the chapter „Remedy of operating faults“.
2. Turn the appliance off and on to make sure the fault reappears.
3. If the malfunction of the appliance still persists after these operations, call
the nearest specialist service center.
• Never repair the electric appliance yourself!
• Unauthorized, unqualified and improper use of an electric appliance may
result in electric shock or other serious injury.
• Only carry out the warranty or post-warranty repair of an electrical
appliance to an authorized qualified person (*).
(*) Competent qualified expert: the sales department of the manufacturer or importer or the person qualified
and authorized to carry out this type of activity with the ability to avoid all risks.

8EN
2. Special Safety Instructions. Read carefully!
• Electrical equipment is designed and manufactured in such a way as
to allow for safe operation and use by persons without a professional
qualification. Despite all the measures taken by the manufacturer to ensure
safe use, handling and use, it carries with it some residual risks and
associated potential hazards.
• To warn of possible hazards, the following symbols and their meanings
have been used on the device and in the accompanying documentation:
This symbol alerts users that the device is operating a dangerous
electrical voltage. Do not remove protective covers on the device.
Failure to observe the safety instructions during use and operation of
the device may result in:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users to the following:
Risk of serious injury or life threatening when not following the safety
instructions when using and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol warns users that if the safety instructions for use and
operation of the appliance are not followed, there is a risk of: Burns
from hot surfaces!
This symbol alerts users to the following: Failure to observe the
safety instructions during use and operation of the unit may result in:
Danger of fire!
Transport / Carry
• When transporting and using, for example the transport cart, be careful
when moving, to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the space
and the routes, which must be unobstructed.
• Never carry the machine while it is in operation. Do not carry the device
while it is plugged into a wall outlet.
Attention!
• Some surfaces may be hot during operation.
• Never transfer the appliance until it has cooled down to ambient
• Transfer the device firmly with both hands behind the handles or the lower
edge of the base or fixed parts of the body.
• Make sure that your hands and equipment are not damp or slippery when
carrying.
There is a risk of serious injury or life threatening!
There is a risk of damage to the device!

9EN
Unpacking / Packaging
• Unpack and remove all parts and accessories of packaging materials,
labels, and labels before putting the device into operation. Keep all
packaging materials in a safe place or keep them out of the reach of
children and inappropriate persons.
There is a risk of serious injury!
There is a risk of choking!
Check / Startup
• Clean the machine before commissioning as described in the „Startup“
section. „Cleaning“.
• Do not clean the unit (the body with the electrical parts and the control
panel) and the power cord with the plug and the temperature controller -
under running water, which may cause the liquid to flow into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.
• Only clean the appliance if it is switched off and disconnected from the
mains.
• We recommend performing both initial and subsequent regular machine
inspections. Do not attempt to interfere with the construction or adjustment
of the component parts in any way.
• Never use the appliance if it is incomplete, damaged, or any part of it has
been damaged during use. In case of damage, have the appliance repaired
by a specialist workshop.
There is a risk of serious injury!
Location / Installation
Warning!
• The appliance is not intended for use in recreational and motor homes and
boats.
• Only place the appliance on straight, strong and stable pads - kitchen work
desks and furniture parts, suitable for the location of kitchen utensils.
• It is recommended to use a heat-resistant insulation pad underneath the
device to provide effective protection against excessive heat flowing from
the device.
• The insulating washer must be made of the reaction-to-fire class A1 (non-
combustible) or A2 (non-flammable) with a thickness of at least 1 mm. The
size of such a pad should exceed the ground plan of the device by 150 mm
on each side.
• Always make sure that the place you want to place the device has sufficient
space, stability, mechanical strength and appropriate lighting.
• Do not place objects or containers of liquids on the heated plates unless
you use them.
• Do not place the appliance:
- unstable tables or inappropriate parts of furniture,
- on an uneven and dirty surface,
- on the sealing edge of tables or parts of furniture,
- in the vicinity of containers with water or other liquids.

10EN
Warning!
• It is forbidden to install and use the device in an environment where there is
a risk of fire or explosion of explosives, explosions of flammable gases and
vapors, and fire of flammable liquids.
Warning!
• Place the device in a place where children can not reach freely. Work desks
and furniture for placing should not be less than 85 cm.
• Prevent children from handling the device. The device may overwrite and
cause serious injury. Mechanical damage (breakage or breakage of parts
and covers) of the device can cause serious injury.
• Do not place the appliance and do not use the proximity of containers with
water. If the appliance falls into the water, do not remove it! First, pull the
power cord plug out of the power outlet and then select the device.
In such cases, take the device for inspection to a specialist service to check
that it is safe and working properly.
There is a risk of electric shock!
There is a risk of electrical short circuit!
• Do not expose the device to:
- direct sunlight, sources and equipment producing heat,
- vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- aggressive effects of the external environment.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not cover the device in any way. Do not insert or allow the foreign bodies
to enter the holes of the device covers. Do not cover the cover openings for
air flow. Air ventilation ensures reliable and safe operation of the device.
• From a fire protection and safety point of view, the device can also be
placed on a work table or similar surface if a safe distance from the
flammable surfaces is maintained:
- at least 800 mm in the direction of the main heat , and
- at least 200 mm in other directions.
There is a risk of electric shock! There is a danger of fire!
Operation / Supervision
Warning!
• Only use the device with the original parts and the supplied
accessories.
• For the safe and reliable use of the device, use only the original power
cord with the appropriate thermostat connector.
• This requirement applies to all types of equipment that include a
power supply with a connector containing the thermostat.
Warning!
• Connect the appliance to the power supply only in such a way that you
first connect the thermostat socket to the socket on the device and
then plug the power plug for the mains socket.
• Do not disconnect the AC power plug from the device while the power
cord plug is plugged into an electrical outlet.

11EN
• The power supply connector is under a dangerous voltage when the
power supply is connected to the power supply.
• Do not drop any objects into the power connector.
• Make sure that the controller is set to „OFF“ in the „0“ position before
each connection to the power supply.
• Do not switch the device on or off by plugging in or pulling out the plug
of the power cord from the wall socket.
• Always connect the appliance to mains power supply for normal use,
then switch on the main power switch - the power controller.
• When you have finished using the appliance, turn off the main power
switch - the power controller, and then pull the plug of the power cord
out of the mains socket.
• The device is under dangerous voltage when the power supply is
connected.
There is a risk of electric shock!
There is a risk of damage to equipment or other property damage!
• The electrical socket and power cord must remain easily accessible for
safe disconnection of the device from the power supply.
• Always unplug the power cord from the wall outlet when leaving the
device unattended.
• Never leave the appliance unattended and freely accessible with a
free-hanging power cord. Children, inappropriate persons or animals
could thrown down the device for the power cord.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not store the appliance with a wrapped cord around its body.
Unfold the network cord „in the way it was put in the original packaging
by the manufacturer.
• If you are not using the device for a long time, disconnect the power
plug from the socket located on the device itself. Keep the power
supply securely together with the device.
There is a risk of damage to the device or other damage to property.
• Always keep your device under control during use and operation!
• This device is not intended to be operated via a programmer, external
time switch or remote control because there is a risk of fire if the
device is covered or incorrectly positioned.
• Do not leave the appliance unattended during use and during
operation, especially when there are children, inappropriate persons
or animals nearby.
• Do not use the appliance near easily flammable materials and objects,
curtains, curtains, decorative fabrics,
Warning!
• Do not use the appliance for space heating, drying textiles, clothing,
footwear or any other items!
• Do not place objects on the appliance‘s heating surface. There is a
danger of fire!
There is a risk of damage to equipment or other property damage!

12EN
Caution!
• The temperature of the accessible surfaces may increase during
operation.
• Do not touch hot surfaces, especially when operating and immediately
after use.
• Be very careful when preparing meals. Heat-treated dishes are also
very hot.
• Use handles when handling the device and its parts. Use kitchen
towels or gloves.
• Open the device covers (eg glass lid) at the time of use slowly and
carefully. When suddenly opening, there is a risk of a hot air leak.
Attention!
• After turning off the machine, the surfaces remain warm for a certain
amount of time. Before any further handling of the storage device,
always wait for the hot surfaces to cool completely.
There is a risk of burning from the hot surface!
There is a risk of burning / burning from hot air/hot food!
Caution!
• Do not use the appliance to prepare or cook food with an open flame.
• Food preparation unattended when using grease or oil can be
dangerous and may result in fire.
• Do not try to extinguish with water if there is a fire (from overheating of
fat or oil). Always turn off the device first
and cover the flame on the device, for example. a lid or a fire blanket.
There is a risk of damage to the device or other damage to property.
There is a danger of fire!
• Never overload the equipment beyond the limits specified by the
technical specifications!
• Observe the operating mode of the machine in accordance with the
operating and operating instructions.
• If you notice any unusual occurrences (sounds, smell, smoke, ...) while
using the device, switch off the device immediately and disconnect
it from the power supply. Have the appliance checked by a specialist
workshop.
• Carefully clean the appliance after all use of all food and grease
residues. Incorrect cleaning or neglect of cleaning results in reduced
equipment safety and service life.

13EN
Warning!
• Do not immerse the appliance (even in part) in water or other liquid.
There is a risk of electric shock!
There is a risk of damage to equipment or other property damage!
• If any safety component (mechanical, electrical) is part of the device,
never disable this part / component! If the safety component is
damaged or not working, do not use the appliance!
• Children under 3 years of age must be prevented from accessing the
appliance unless they are under the supervision.
• Children between 3 years and under 8 years of age may not connect
the appliance to a power outlet, nor regulate or clean it or service
users.
CAUTION!
• Some parts of this product may become very hot and may cause
burns. Take special care when vulnerable persons or children are
present.
• Never underestimate the potential hazards and take extreme caution
!!!
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
The symbol on the product or on its packaging indicates that this product does not belong
to household waste. It is necessary to take it to a collection point for electrical recycling
and electronic equipment.
By ensuring proper disposal of this product, you will help prevent negative consequences
to the environment and human health that would otherwise be caused by inappropriate
disposal of this product. For more detailed information about recycling of this product,
please contact your local authority, your household waste disposal service or the shop
where you purchased the product.
This product meets all the essential requirements of the EU directives that apply to it.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika

14EN
Technical specifications
Model: EG-1900
Power supply: 220 - 240 V~ 50/60 Hz
Power consumption: 1 900 W
Dimensions (W x H x D): 60 x 13 x 34 cm
Weight: 4 kg
The right to change is reserved!
Location
• Leave enough free space around the device to ensure proper ventilation.
Above the device must be left free space.
• Do not place any objects on the machine.
• Place the device near an easily accessible electrical outlet. Do not use
extension cords or splitters. If you notice problems, disconnect the device
from the power supply immediately.
Before use
Before using the device, follow these guidelines:
• Wash the grill plates with water with cleaning agent. Dry them . Then lightly
grill the cooking surfaces with cooking oil.
• When using your grill for the first time, do not place any food on the grill
plates.
• Connect the grill as instructed.
• There is an invisible protective layer on the heating body from the
manufacturing process. This protective layer must be removed before first
use. Set the thermostat to the maximum value and leave the grill turned
on for 10 minutes. Make sure that the room is well ventilated because it
can create smoke. This is not an error on the device, it is a process that
removes the protective layer. Turn off the grill by turning the thermostat to
„0“ (OFF) and allow to cool. The grill is now ready for use.

15EN
Parts description
1 Temperature setting thermostat/switch (contact grill)
2 Power light (contact grill)
3 Non-stick grill plates
4 Handle
5 Top grill lid
6 Grill plate
7 Power light (barbecue plate)
8 Temperature setting thermostat/switch (grill board) 9 Power cord
10 Oil container (grease)

16EN
Using the device
The device allows barbecue with a closed device (toasting) or for cooking/
grilling on the grilling plate.
You can choose the type of transference and set the performance for such
baking/grilling. Because each side of the grill board has independent controls
and heating elements, you can use each side separately and set different
temperatures.
Barbecue with a closed girl (toaster)
1. Connect the power cord (9) to an electrical outlet.
2. Switch the closed and empty device on by turning the thermostat and set
the desired power (temperature).
0 - OFF
1 - 150 °C
2 - 190 °C
3 - 210 °C
The red light (2) lights up. The temperature of the platter will be warmed
according to the thermostat setting. The warm up takes about 5 minutes.
Once the selected temperature has been reached, the red indicator light (2)
switches off.
Warning!
Do not leave the grill turned on for a long time without food.
The grill can overheat and damage. The two grill plates are heated
simultaneously.
3. Open the grill by lifting the handle (4).
4. Place a grilled food on the heated bottom plate and close the grill. Grill as
needed for about 3 to 8 minutes. If necessary, set the thermostat.
Place the stowage container (10) below the outlet. Regularly check the
grilled food and do not leave them unattended. There may be a fire.
5. When the barbecue grill is complete, turn off the thermostat to „0“, open it
according to step 3 and disconnect the grill from the mains.
Warning!
Remove the grilled food from the plate only with plastic or wooden grilling
tools to avoid damaging the non-stick surface of the grilling plates.

17EN
Grilling on the grilling plate
1. Connect the power cord (9) to an electrical outlet.
2. Switch on the open and empty device by turning the thermostat and set the
desired power (temperature).
0 - OFF
1 - 150 °C
2 - 190 °C
3 - 210 °C
The red indicator light (7) lights up. The temperature of the platter will be
warmed according to the thermostat setting. The warm up takes about 5
minutes. The red indicator light (7) goes out after reaching the selected
temperature.
Warning!
Do not leave the grill turned on for a long time without using food. The grill
can overheat and damage.
3. Place a grilled food on the heated plate and grill as needed. If necessary,
set the thermostat.
Place the jar containers (10) below the outlet. regularly check grilled food
and do not leave them unattended. There may be a fire.
5. When the barbecue grill is complete, turn off the thermostat to „0“ and
disconnect the grill from the mains.
Warning!
Remove the grilled food from the plate only with plastic or wooden grilling
tools to avoid damaging the non-stick surface of the grilling plates.
Tips for grilling
• Cut the meat I a way that the top grill plate touches it when you tilt it.
• We do not recommend meat with strong bones to grill in the contact grid.
• We recommend not to salt the meat before grilling, otherwise it will be solid
and dry.
• Do not puncture the meat with a fork or knife during grilling to avoid juicing.
• Do not dry meat by grilling it too long.

18EN
Cleaning and maintenance of equipment
Disconnect the power cord from the mains and allow it to cool down
completely.
1. Cleaning the surface of the device
Never immerse the appliance in water or other liquid!
Use only a cloth slightly moistened with a mild detergent solution to clean
the surface of the device. Do not use any solvents or abrasive cleaners.
They can damage the surface finish.
2. Cleaning internal plates
Use a cloth slightly moistened in a mild detergent solution to clean the
inside grill plates of the appliance and accessories. Do not use any solvents
or abrasive cleaners.
They can damage the surface finish.
You can first wipe the grease from the platter with a paper towel.
After cleaning, let the plates dry freely in air and close the grill after drying.
3. Cleaning the control panel
Clean the control panel with a dry cloth. If necessary, use a slightly
moistened cloth in clean water. Do not use any solvents or abrasive
cleaners. They can damage the control panel.