Romina TR 8501 User manual

IMPORTANT:
PLEASE, READ ALL INSTRUCTIONS
BEFORE ASSEMBLING!
PLEASE, SAVE INSTRUCTIONS FOR
FUTURE USE
ASSEMBLY INSTRUCTIONS
FOR YOUR TR 8501 TODDLER RAIL
(PLEASE REFER TO “ASSEMBLY INSTRUCTIONS FOR YOUR 8501 CONVERTIBLE CRIB”)
NOTE: THE STYLE OF YOUR CRIB OR OF YOUR
MATTRESS SUPPORT MAY VARY FROM WHAT IS
PICTURED IN THE INSTRUCTION SHEET
DO NOT THROW THIS INSTRUCTION BOOKLET
20 Corporation Row, Edison, NJ 088 71
Phone [phone], Fax [phone]
www.rominafurniture.com
Furniture
THIS CRIB CONFORMS TO APPLICABLE
REGULATIONS PROMULGATED BY THE
CONSUMER PRODUCT SAFETY COMMISSION
WARNING: THE PROPER USE OF THIS CRIB IS
IMPORTANT FOR YOUR BABY'S SAFETY. TO KEEP
YOUR BABY SECURE AND SAFE,
AND TO AVOID POTENTIAL INJURY OR DEATH,
CAREFULLY READ AND FAMILIARIZE YOURSELF
WITH ALL WARNINGS, CAUTIONS AND
INSTRUCTIONS IN THE INSTRUCTION BOOKLET.
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE
USE.
§ANY MATTRESS USED IN THIS CRIB MUST BE AT
LEAST 27 1/4 IN BY 51 5/8 IN BY 4 IN, WITH A
THICKNESS NOT EXCEEDING 6 IN.
§THE MINIMUM AGE OF YOUR CHILD SHALL NOT BE
LESS THAN 15 MONTHS AND THE MAXIMUM
WEIGHT SHALL NOT BE GREATER THAN 50LB.

Note: The letters which
identifies a part are the
initials of the respective
part name (such method
is employed to facilitate
parts recognition
between the drawings
and the parts list).
Please locate and confirm that
you have the following parts:
TR. 1toddler rail =
one bag of hardware with the following:
Allen bolts (70mm - 2 3/4") =1. 2
Required tools: Allen wrench (supplied in the
crib’s hardware bag), Phillips screwdriver (not
supplied).
CAUTION: Do not use a power screwdriver which
can cause screws to break or strip
Be sure to the screws / bolts when you are asked to do so.COMPLETELY TIGHTEN
Phillips screwdriver (not supplied)
1
TR

1
1
REQUIRED
WARNING!
COMPLETELY TIGHTEN!
FIGURE 1
WARNING: TO KEEP YOUR BABY
SECURE AND SAFE, AND TO AVOID
POTENTIAL INJURY OR DEATH, IT'S VERY
IMPORTANT TO COMPLETELY
TIGHTEN BOTH ALLEN BOLTS LISTED IN
STEP 2.
TR
FB
STEP 1 (Two adults are required to complete this step)
Transform your crib into a daybed by following to fromSTEP A F
“ASSEMBLY INSTRUCTIONS FOR YOUR 8501 CONVERTIBLE CRIB”
but don’t attach the wooden rail listed in .(WR) STEP C
Carefully store the resulted pieces in a proper place, away from direct
sunlight and moisture, taking care not to scratch the wood finish.
STEP 2
Attach the ail to the footboard of the crib usingtoddler r both( R) (FB)T
Allen bolts Start the threads by hand to assure you don't strip the()1.
threads, then, use the y supplied Allen wrench.previousl
Completely tighten both Allen bolts.
After completing , your crib should look like the one depicted onSTEP 2
the first page of this instruction booklet.

Regular cleaning with mild soap on a soft cloth, followed by a clean damp
cloth, then a dry cloth, will preserve the original luster and beauty of the
fine finish of your Romina Furniture product.
Visit
www.rominafurniture.com
for updates, special offers and more new designs.
Team
Thank you for being one of our distinguished clients.